Max 3/4 in. Push-to-Connect x 3/4 in. FIP x 18 in. Corrugated Stainless Steel Water Heater Connector
- Fastest way to connect PEX, copper, CPVC, or PE-RT pipe
- Half the insertion force with double the burst pressure
- Can be installed on wet lines and pressure tested immediately
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
SharkBite Max flexible water heater connectors are the fastest and easiest way to connect your water heater to existing pipes in your home. A newly designed stainless steel collet retainer delivers additional strength and durability and provides a 200 psi pressure rating. SharkBite Max connectors do not require a PEX tube liner, and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue, or special tools required. After inserting to pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The durable corrugated stainless-steel hose is a great option for areas that require hard piping but is still flexible enough to connect to water lines in tight spaces that don't line up. Available in additional lengths (12 in. to 24 in.) and with integrated ball valve shut off.
Highlights
- Compatible with PEX, copper, CPVC PE-RT, or HDPE pipe
- Approved for electric and gas water heaters with flue vent
- Requires no special tools to install on hot or cold-water lines
- Can be installed on wet or dry lines pressure tested immediately
- Rotatable after installation and removable
- PEX tube liner not required
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Low-lead DZR corrosion-resistant brass body
- Rated to 180°F and 200 psi
- Code approved, IAPMO Listed for details, see specification
- 25-year warranty when used with PEX, copper, CPVC and PE-RT pipe, see warranty
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions: H 1.29 in, W 1.29 in, L 18 in
Dimensions
Product Height (in.) | 1.29 in |
|---|---|
Product Length (in.) | 18 in |
Product Width (in.) | 1.29 in |
Details
Finish Family | Silver Metallic |
|---|---|
Material | Stainless Steel |
Pack Size | 1 |
Returnable | 90-Day |
Warranty / Certifications
Manufacturer Warranty | Must be installed per installation instructions. |
|---|
Questions & Answers
How far does the pipe extend into the fitting?
What is the minimum bend radius for the 3/4 corrugated connector?
Hi Jim, The Max 3/4 in. Push-to-Connect x 3/4 in. FIP x 24 in. Corrugated Stainless Steel Water Heater Connector has a minimum bend radius of 7". If you have any more questions you can call tech support at 877-700-4242. Kind regards,
Will the 3/4 inch FIP fit a garden Hose Bib?
Hi, Thank you for contacting SharkBite. The Max 3/4 in. Push-to-Connect x 3/4 in. FIP x 24 in. Corrugated Stainless Steel Water Heater Connector will not connect to a Hose Bibb. The Hose Bibb has different threads then the Max 3/4 in. Push-to-Connect x 3/4 in. FIP x 24 in. Corrugated Stainless Steel Water Heater Connector. If you have any more questions you can call tech support at 877-700-4242. Kind regards,
we had a leak and I couldn't find a washer in store. so I purchased the same hose and removed the washer. I would like to buy a replacement rubber washer so I can have a back up hose ready.
Hello, The SharkBite 3/4 in. Push-to-Connect Corrugated Stainless Steel Water Heater Connector does not have replacement washers to purchase. If you have any more questions you can contact tech support at 877-700-4242\. Kind regards,
Any problems with black greasy/rubber debris coming from this connector as with the Braided Stainless Steel Water Heater Connector (also from SharkBite)?
I have had no problem with any debris coming through the water lines. I read about folks having problems with the other kind, which is why I bought this one. When I received it I looked inside before installing and all I could see was metal - no liner to disintegrate.
I tried several types of tank connectors. Copper, brass, braided and stainless hoses/tubes. Many of them were showing signs of early failure. The 3/4 in. Push-to-Connect x 3/4 in. FIP x 18 in. Corrugated Stainless Steel Water Heater Connector is the one I have chosen to stay with on several units we have rebuilt. It don't have the corrosion build up like the copper and brass connector or the rubber inner hose that breaks down. I really like Shark Bites....fast easy and they come apart.
No problems or degree from connector.
I installed one of these on the hot water outlet of my new water heater. All went well with the initial installation. One week later I checked the connections and found the 3/4" NPT leaking (created quite a mess). Once isolated and removed, I found the rubber seal crimped and damaged. I purchased a new one, and installed; so far so good. Several questions: How could I have damaged the seal, and why would it last a week before leaking? and, Do you need pipe dope on the male connection on the water heater where it is being installed?
The o-ring could have been damaged if the pipe you installed was not de-burred and had a sharp edge. As far as why it didn't leak immediately, it could have been due to the pressure. We do recommend using Teflon tape on all threaded applications. If you have further questions, please contact our Customer Service M-F, 8am-5pm at (877) 700-4242.
The rubber washer was over torqued. Its not a head bolt on a big block Pontiac. Try not to over tighten them. Only use enough force to stop seepage. Then keep an eye on it. You can always tighten a bit if you notice moisture. I always wrap my threads with teflon tape. It can help with seepage....but really makes it easier to get apart years later.
are these connectors within code for New Hampshire?
SharkBite Products are approved in the National Plumbing Code. You would need to contact your local inspector to see if there is any variations in your specific location. Municipalities codes can vary off of the national code.
Viewing 1-7 of 7
Customer Reviews
4.5 out of 5
5
289
4
35
3
8
2
10
1
36
Kind regards,
