#1 Home Improvement Retailer

18-1/4 - 28 in. Aluminum Steel Appliance Rollers (2-Pack)

$1927
  • Adjustable length for all kinds of applications
  • Perfect for heavy appliances like refrigerators, washers, dryers
  • Straight roller wheels are designed for use on most hard surfaces
  • View More Details
Store
0 in stock
caret

Product Details

This Shepherd 18-1/4-28 in. Aluminum Steel Appliance Rollers (2-Pack) feature nonslip pads to help keep appliances from slipping off when moving. The rollers extend from 18-1/4 in. to 28 inches. Ideal for moving heavy furniture like refrigerators, washers, dryers, and much more.
  • 1/2 in. wide x 1-1/8 in. diameter hard white PP wheels are mounted to adjustable length aluminum platform to support and add mobility to heavy refrigerators and appliances (1 set = 2 Pack)
  • Low profile rollers should be placed on the exterior of appliances to aid in mobility and add 1-3/8 in. to the overall height
  • 2000-lb load capacity per set (of 2) spreads the load across 32 independent wheels
  • Adjustable length from 18-1/2 in. to 27-3/4 in. with integrated length-locking wingnut
  • A great choice when heavy appliances need to be mobile for cleaning or installation and not recommended for all laundry equipment or on hardwood or cushioned vinyl floors
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

51Questions
caret
Q:Can these be used under a 24 cu ft (300 lbs) refrigerator, kinda permanently, for easy sliding out for cleaning the floor under?
by|Jun 26, 2023
1 Answer
Answer This Question

A:  Thank you for your inquiry. I am from the manufacturer. Yes, they can be left under the refrigerator. If you have any further questions, feel free to contact us at 1-800-645-8990 Mon-Fri from 8am to 5pm EST and a Product Specialist will be glad to assist or you can email us at customerservice@shepherdhardware.com

by|Sep 19, 2023
    2 found this answer helpful
    caret
    Q:What is the maximum size leg that will work with this ? I would like to use it with a table saw that has 2x4 sized legs, 1.5 x 3.5 inches.
    by|Jun 3, 2023
    1 Answer
    Answer This Question

    A:  Thank you for your inquiry. I am from the manufacturer. The legs extend from 18-1/2" to 27-3/4". This is designed for use with appliances.

    by|Jun 5, 2023
      caret
      Q:I am confused because the description says great for washers and dryers and then in fine print it says not suitable for laundry equipment. I have an all-in-one washer LG that is the size of a standard washing machine. Will these work for it?
      by|May 25, 2023
      1 Answer
      Answer This Question

      A:  Thank you for your inquiry. I am from the manufacturer. Not all laundry appliances or installations are equal. We recommend to use caution where motion is possible. If you have any further questions, feel free to contact us at 1-800-645-8990 Mon-Fri from 8am to 5pm EST and a Product Specialist will be glad to assist or you can email us at customerservice@shepherdhardware.com

      by|May 31, 2023
        1 found this answer helpful
        caret
        Q:Do they turn left and right or only forwards and backwards? Can it make turns?
        by|May 18, 2023
        3 Answers
        Answer This Question

        A:  Only forward and back. No turns

        by|May 20, 2023

          A:  Thank you for your inquiry, I am from the manufacturer. This item only rolls forward and backward. If you have any further questions, feel free to contact us at 1-800-645-8990 Mon-Fri from 8am to 5pm EST and a Product Specialist will be glad to assist or you can email us at customerservice@shepherdhardware.com

          by|May 25, 2023

            A:  These only move forwarded or backwards.  No turns.

            by|May 19, 2023
              Showing 1-4 of 51
              caret

              Customer Reviews

              4.3 out of 5
              (414)
              • 4.3
                out of 414 reviews
              • 87% recommend this product
              Filter by:
              Showing 1-10 of 414 reviews
              Great help
              These were easy to use and saved a lot of stress moving a full sized stacked washer and dryer.
              by
              • Verified Purchase
              Other than having to tilt the appliance, the rollers are VERY easy to install and make cleaning a...
              Other than having to tilt the appliance, the rollers are VERY easy to install and make cleaning around the appliance so much easier. I have a long haired dog and there is always hair under and behind everything. I have rollers under the washer, dryer, and freezer. I am now going to order another set for the fridge. The washing machine and dryer people from the appliance store said I should not use them. In fact the installer is not allowed to put the appliance on them. I have been using them for over a month and there is no problem of either machine rocking or rolling on their own. The real reason I wanted them installed was to simplify the cleaning of the dryer lint duct work. It had been 10 years since it was cleaned and was causing a problem - thus the new machines. Cleaning the duct work is something that dryer manufacturers recommend annually. To pull out the dryer, you must first pull out the washer. I'm a senior and doing that by myself was impossible. Hence, the phenomenal lint buildup restricting the air flow and over heating. Now I can handle the job by myself.
              by
              • Verified Purchase
              • Recommended
              14 found this review helpful
              This is my second set I highly recommend them
              This is my second set I highly recommend them
              by
              • Verified Purchase
              • Recommended
              5 found this review helpful
              Excellent product when my neighbor saw it he went and bought a set. makes moving my upright deep ...
              Excellent product when my neighbor saw it he went and bought a set. makes moving my upright deep freeze a breeze
              by
              • Verified Purchase
              • Recommended
              3 found this review helpful
              I made the purchase 2017 because I like to keep my refrigerator clean with as much air flow as po...
              I made the purchase 2017 because I like to keep my refrigerator clean with as much air flow as possible and the Shepherd aluminum steel appliance rollers are exactly what I needed to do just that. My fridge is 20 years old and by lifting it off the floor it had helped the performance. I only wish I had found them 20 years ago and maybe I could have had my fridge for another 5 years but with power surges over the years it is at it's end. But with my new fridge I'm am prepared with the tools I need to make the next one last a bit longer.
              by
                • Recommended
                5 found this review helpful
                Just what I needed
                Easy to assemble and durable. Just what I needed to move my old refrigerator instead of dragging it side to side to move it. Comes in a 2 pack and all you need to do after you take it out of the box is to extend the rollers to the proper length of your item and tighten the screw. Place them under the item and you have mobility. Sturdy and durable enough to handle heavy items.
                by
                • DIY
                • Verified Purchase
                • Recommended
                12 found this review helpful
                Best solution to my problem
                I use the wheels to put in the platform base for a big shed and they are working perfect.
                by
                • DIY
                • Verified Purchase
                • Recommended
                11 found this review helpful
                simple, sturdy
                I bought and used these adjustable rollers for a heavy lateral file, not a refrigerator. They are light weight and easily adjustable. They are small enough to be relatively inconspicuous, large enough to work on most carpeted surfaces. Caution: the 'load' needs to be on the rollers, not in the 'beam' portion; works best under an object with 'feet'.
                by
                • DIY
                • Verified Purchase
                • Recommended
                19 found this review helpful
                by
                  by
                    Showing 1-10 of 414 reviews