#1 Home Improvement Retailer
Home
Building Materials
Building Hardware
Post Brackets
Post Cap Connectors

Internet # 205694641

Model # PC4Z

Store SKU # 1001236708

PCZ ZMAX Galvanized Post Cap for 4x Nominal Lumber

(46)Questions & Answers (4)
$2887
Apply Now
Pay $3.87 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Global leader in structural construction products since 1956
  • Products designed and tested for strength and easy installation
  • Diverse product line trusted by Pros and DIYers alike
  • View More Details
Store
0 in stock
caret

Product Details

PCZ post caps are designed for easy and fast installation for post-to-beam connections. They feature post and beam flanges that are in-line so that one model can accommodate several post sizes. Models are available for use with 4x, 6x and 8x solid sawn and rough lumber post-to-beam connections.
  • The ZMAX finish is standard to meet exposure conditions in many environments
  • Easy installation with 0.148-in x 3-in nails or Strong-Drive SD Connector screws
  • Seat width: 3-9/16-in
  • Nominal post size: 4x
  • Made from 16-gauge steel
  • Install with 0.148 in. x 3 in. nails or the #9 x 1-1/2 in. Strong-Drive SD Connector screw
  • Shop all Simpson Strong-Tie here.
  • Return Policy
caret

Specifications

caret

Questions & Answers

4Questions
caret
Q:Will this support a porch swing 2 4x4 posts with a 4x6 beam on top?
by|Jun 2, 2023
1 Answer
Answer This Question

A:  Hi Brandon, this is Colin from Simpson Strong-Tie. The PCZ is designed for a continuous beam to post connection. If the beams end at the post, the end cap version (EPCZ) would be more suitable.The question if those will support your structure depends on the types of loads (direction) and the capacity required. These caps resist uplift and lateral loads (parallel to beam) but are not rated for download and perpendicular to beam loads. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.

by|Jun 5, 2023
    caret
    Q:Can I use this for a 4x6 post and a 4x6 beam? I'll be using the 4x6 beam to hang rafters from. Thank you.
    by|Sep 27, 2022
    1 Answer
    Answer This Question

    A:  Hello Brandon, This is Colin from Simpson Strong-Tie. The PC4Z has two lower flanges that are 3-9/16" apart to fit a 3-1/2" (4x) vertical post. And it has to upper flanges that are also 3-9/16" apart to fit a 3-1/2" (4x) horizontal beam. On our home page www.strongtie.com enter PC4Z in the Search strongtie.com field for more information including required fasteners and allowable load values. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.​​

    by|Sep 27, 2022
      caret
      Q:Is this tie 27.39 for one or is this for a box of 4 or more?
      by|Apr 23, 2020
      0 Answer
      Answer This Question
      caret
      Q:Can I use this to place on top of 4x6 post, that I will be placing 2-2x6's in, which will be the ...
      by|May 14, 2019
      2 Answers
      Answer This Question

      A:  Here is a link to the proper sized post cap: https://www.homedepot.com/p/Simpson-Strong-Tie-BCS-ZMAX-Galvanized-Post-Cap-Base-for-Double-2x-Beam-4x-Post-BCS2-2-4Z/100374868

      by|Jun 19, 2020
      1 found this answer helpful

      A:  There will be a half inch gap as the top of the cap is designed to hold a 3.5 inch 4x4 or 4x6 where the true measure is 3.5 inches. There should be a similar product available with the measurement you need at 3 inches to hold two 2x6’s

      by|Jun 20, 2022
        3 found this answer helpful
        Showing 1-4 of 4
        caret

        Customer Reviews

        4.5 out of 5
        (46)
        • 4.5
          out of 46 reviews
        • 100% recommend this product
        Filter by:
        Showing 1-10 of 46 reviews
        Aug 31, 2023
        by
          Aug 2, 2023
          They’re good quality, but way to expensive for what they are and about 200% higher than a year or two ago, but a necessary item for the project. Raptor
          by
          Response from Simpson Strong-TieAug 2, 2023
          Hi Raptor, thank you for your message. We want to make sure we address your price related comments. The key features of the PC4Z are its design to provide uplift and lateral loads for a variety of 4x post sizes while also having a corrosion resistant ZMAX finish. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.​​​ SimpsonStrongTie
            Jul 10, 2023
            by
              Jun 14, 2023
              For inspection is good...
              For inspection is good
              by
              • Verified Purchase
              Mar 9, 2023
              by
              • Verified Purchase
              Jan 4, 2023
              Just what was needed to tie a set of beams...
              Just what was needed to tie a set of beams together.
              by
              • Verified Purchase
              Oct 26, 2022
              by
              • Verified Purchase
              Sep 29, 2022
              Best post caps on the market
              Excellent product- 2nd time we've purchased these- well priced, quality product
              by
              • Verified Purchase
              • Recommended
              Sep 18, 2022
              Rating provided by a verified purchaser...
              Rating provided by a verified purchaser
              by
              • Verified Purchase
              Aug 12, 2022
              Great workmanship starts with good material s and this...
              Great workmanship starts with good material s and this is a good start
              by
              • Verified Purchase
              Showing 1-10 of 46 reviews
            • Strong-Drive 3 in. x 0.148 in. SCN Smooth-Shank HDG Connector Nail (250-Pack)
              (56)
              $1998
            • Strong-Drive 3 in. x 0.148 in. SCN Smooth-Shank HDG Connector Nail (50-Pack)
              (16)
              $536
            • #9 x 1-1/2 in. 1/4-Hex Drive, Strong-Drive SD Connector Screw (100-Pack)
              (609)
              $1431
            • Titen HD 5/8 in. x 5 in. Zinc-Plated Heavy-Duty Screw Anchor (10-Pack)
              (5)
              $4229
              /package
            • HH Galvanized Header Hanger for 4x Nominal Lumber
              (46)
              $1113
            • LUS Galvanized Face-Mount Joist Hanger for 2x6 Nominal Lumber
              (130)
              $136
            • Strong-Drive 1-1/2 in. x 0.148 in. SCN Smooth-Shank HDG Connector Nail (120-Pack)
              (165)
              $498
              /package
            • ABA ZMAX Galvanized Adjustable Standoff Post Base for 4x6 Nominal Lumber
              (954)
              $2158