#1 Home Improvement Retailer

Internet # 311590746

Model # SF2-HCK07

Store SKU # 1005175315

81 in. x 1-1/4 in. x 1-1/4 in. Black Aluminum Fence Channels, for 7ft. High fence, 2 per pack, includes screws

$10598
Apply Now
Pay $80.98 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Attach to Slipfence posts for a 7' high fence
  • 2 channels and screws for a 7ft.h x 6ft.w Horizontal fence panel
  • Easy to install, just slip in 15 deck boards 1" x 5.5" x 6ft.
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret

Product Details

Add warmth and privacy to your yard this year with the Slipfence Horizontal Fence system. This Aluminum Channel Kit includes 2 (two) channels needed to build one 7ft. high fence panel. This kit combined with the Slipfence Post Kit, SF2-PK310 or SF2-PK312, provides a strong and long-lasting framework for your horizontal fence project. Attach these two channels to Slipfence Aluminum posts, then slip in regular 1 in. thick deck boards, (called 5/4 deck boards), sold separately into these channels. The result is a warm, fully private, contemporary, horizontal wood fence that has the strength and endurance of an aluminum fence with the warmth and privacy of a wood fence.This system requires Slipfence Aluminum posts and a Slipfence pair of Cap Rails, either one for the bottom and one for the top of each panel, or one just for the top of each panel.Search SF2-PK3010 or SF2-PK312 for postsSearch SF2-HCR84-2 for Cap RailsOnce your Slipfence horizontal fence system is installed, the wood will appear too high for the channels. Please allow approximately 4-6 weeks for the wood to shrink and settle down to approximately 1" above the tops of the two side channels and then cut your cap rail to size and slip it onto the top of each panel.
  • Inside channel width 1-1/8 in. to accommodate a 5/4 in. deck board with an actual thickness of 1 in.
  • Kit includes 2-channels 81 in. long channels to hold 15 boards stacked.
  • Also includes 10 stainless #12 x 5/8 in. star drive self-drilling screws to fasten channels to posts
  • Includes black stainless wood screws with star drive to fasten deck boards to channels
  • To be used with Slipfence post kit:10 foot post: SF2-PK310 - SKU no. 303149326 or12 foot post: SF2-PK312 - SKU no. 311798902
  • Screw holes are counter sunk for screws to sit flat leaving a nice flush surface inside channel to slide in deck boards
  • Top Cap and Bottom Cap rails or just top come in packs of 2.SF2-HCR84 SKU No. 308979361
  • If 5/4 boards not available at your home Depot Store look at SLIPFENCE Industrial Channel Kit SF2-IHCK7 - SKU No.320388076. to hold 2 x 6 boards instead for an industrial look.
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

Dimensions

Product Height (in.)81 inProduct Thickness (in.)1.3 in
Product Width (in.)1.3 in

Details

Color FamilyAluminumColor/FinishBlack Powder coated
FeaturesPaintedMaterialAluminum
Product Weight (lb.)7 lbRecommended FastenerScrews
Returnable90-Day

Warranty / Certifications

Manufacturer Warranty5year paint, 25 year aluminum
caret

Questions & Answers

4Questions
caret
Q:I purchased the 7' fence brackets. Is it okay to use spacers instead of having the boards all touch? Is there a recommendation on spacing?
by|Jun 12, 2023
1 Answer
Answer This Question

A:  Yes you can create a semi-private fence. Level and fasten the bottom board. Use a temporary spacer for your desired gap (1/8"-3"), some customers have used a pencil, others have used scrap pieces of wood. Please your spacer at both ends, slide the next board in place: level and fasten both ends. Some boards will require you to pre-drill holes in the channel. Repeat the steps (complete 4-5 rows per section, start next section). Visit our website and view the Horizontal Installation video for tips and tricks.

by|Jun 16, 2023
    1 found this answer helpful
    caret
    Q:How is this for a 7 foot fence when the height of this is 6.75 feet (81in)?
    by|Mar 7, 2023
    1 Answer
    Answer This Question

    A:  Thanks for the great question. When you are fastening the channels to the post you would leave a 1" to 1-1/2" space at the bottom to allow for air flow and water run off. The last horizontal board installed sits proud of the channel by 1" to 1-1/2". This equates to a fence height of 6'11"- 7'. Hope this helps.

    by|Mar 8, 2023
      caret
      Q:What thickness of wood would be fit?
      by|Dec 29, 2022
      1 Answer
      Answer This Question

      A:  Thank you for the question: The inside channel width 1-1/8 in. to accommodate a 5/4" x6" deck board with an actual thickness of 1 inch. Please visit our website for installation details and a short video. ww.slipfence.com

      by|Dec 30, 2022
        caret
        Q:Does this come in white?
        by|Apr 14, 2020
        1 Answer
        Answer This Question

        A:  No, this doesn't come in white.

        by|Apr 15, 2020
          Showing 1-4 of 4
          caret

          Customer Reviews

          4.3 out of 5
          (9)
          • 4.3
            out of 9 reviews
          • 0% recommend this product
          Filter by:
          Showing 1-9 of 9 reviews
          by
          • Verified Purchase
          Way overpriced but works well…....
          Way overpriced but works well….
          by
          • Verified Purchase
          Easy install. I used opposite boards with a small filler...
          Easy install. I used opposite boards with a small filler strip.
          by
          • Verified Purchase
          Rating provided by a verified purchaser...
          Rating provided by a verified purchaser
          by
            Works great for what it's for but its to expensive....
            Works great for what it's for but its to expensive.
            by
            • Verified Purchase
            The item is great but the price is over rated...
            The item is great but the price is over rated because the material is aluminum. If the material was galvanize than yes the price is just right. This goes for the fence post also.
            by
            • Verified Purchase
            1 found this review helpful
            Rating provided by a verified purchaser...
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            This product is 100% as it is represented. We built...
            This product is 100% as it is represented. We built a 18 ft. X 6 ft. horizontal fence for patio privacy, using cedar deck boards. The combination of the wood grain with the black metal posts, channels and caps is aesthetically pleasing. Solid quality and simplicity in design.
            by
            • Verified Purchase
            We were missing 2 caps and the rail was for...
            We were missing 2 caps and the rail was for a 7 foot high fence, not 6 like I thought I ordered. It created a lot more work cutting each one off
            by
            • Verified Purchase
            Showing 1-9 of 9 reviews