#1 Home Improvement Retailer

Internet #206740122

Model #5304484130

0-18 in. Dryer Periscope Vent Kit

$2999
Apply Now
Pay $4.99 $29.99 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Compact design allows you to fit it in the space critical areas
  • Stainless steel waterline is corrosion-resistant
  • Fitted ends and clamps save time during installation
  • View More Details
How to Get It

Frequently Bought Together

+
+
Price:
$2999

Product Overview

Smart Choice Dryer Periscope Vent Kit is uniquely designed to allow for close placement next to the wall in space critical areas. The vent adjusts from 0 in. to 18 in. and has the ability to pivot 180-degrees for direct or offset applications. Included are the vent pipe and two clamps.
  • Includes everything you need to connect a dryer to a vent
  • Includes adjustable periscope which vents from 0 in. to 18 in., includes 2 clamps
  • Enhances dryer time
  • Fitted ends and clamps for quick installation

Specifications

Dimensions

Product Length (ft.)1.5 ftProduct Width (in.)4 in

Details

Appliance CategoryAppliance PartsAppliance TypePart/Accessory
Compatible Appliance TypeElectric Dryer,Gas DryerDryer Part TypeVent Periscope
IncludedHardwareModel CompatibilityUniversal
Pack Size1Part TypeDryer Vent Periscope
Returnable90-Day

Warranty / Certifications

Manufacturer WarrantyLimited 90-Day Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.8
    out of 50 reviews
  • 56%recommend this product
Filter by:
Showing 1-10 of 50 reviews
Excellent Solution for City Apartment
I live in a condo apartment building with the space only for a stackable washer/dryer. When we replaced the original appliance, the new washer and dryer combo did not line up with the dryer duct pipe extending from the wall. We ended up with a snaking aluminum pipe that pushed the appliances out from the wall so much that it made it difficult to squeeze into the laundry room and open the doors to the washer and dryer. We lived with this for 2 years thinking there was no solution. But when we realized we would need to replace our hot water heater, we knew we were in trouble because with the new W/D in the way it was not possible to remove and replace the hot water heater. This periscope vent unit is pure genius! It solved our problem. I was able to do the job myself along with some aviation snips, A3 protective gloves, and Nashua dryer duct tape.
by
    • Recommended
    1 found this review helpful
    Excellent low profile vent
    Used this to create an in-wall vent option during a laundry room renovation. Thin enough to run through studs and floor to connect to the exit pipe under the house.
    by
      • Recommended
      Needed to be cut to fit above the floor...
      Needed to be cut to fit above the floor
      by
      • Verified Purchase
      This worked really well for the application I had....
      This worked really well for the application I had.
      by
      • Verified Purchase
      This product did exactly what I needed. It was a...
      This product did exactly what I needed. It was a bit too long for the space I had but I veryeasily cut it to size with tin snips.
      by
      • Verified Purchase
      by
      • Verified Purchase
      Periscope worked very well, only needed to purchase 4" coupler...
      Periscope worked very well, only needed to purchase 4" coupler to extend pipe out of dryer additionally. Without the extension periscope would not be vertical but on angle increasing distance dryer would be from wall.
      by
      • Verified Purchase
      Works great for venting a clothes dryer in a tight...
      Works great for venting a clothes dryer in a tight space!
      by
      • Verified Purchase
      Rating provided by a verified purchaser...
      Rating provided by a verified purchaser
      by
      • Verified Purchase
      The space behind my dryer was too confined on both...
      The space behind my dryer was too confined on both sides to attach the periscope vent. I returned it and bought a 4 foot metal flex duct and 2 elbows. With both elbows opening upward and connected to each end of the metal flex duct in the shape of an inverted "U", I was able to push the dryer adequately close to the back wall.
      by
      • Verified Purchase
      Showing 1-10 of 50 reviews