![]() | ![]() | ![]() | ![]() | |
Brand | HDX | Surebonder | Freeman | RYOBI |
Name | Pneumatic 20-Gauge 9/16 in. Fine Wire Stapler | Pneumatic Upholstery Stapler with 22-Gauge Upholstery Staples (3/8 in., 7/16 in. and 5/8 in.) | Pneumatic 22-Gauge 5/8 in. Upholstery Stapler | 18-Volt ONE+ Cordless Compression Drive 3/8 in. Crown Stapler (Tool Only) |
Price | ||||
Ratings | (8) | (229) | (18) | (791) |
Power Type | Air | Air | Air | Cordless Electric |
Minimum Fastener Size | 1/4 in | 5/16 in | 1/4 in | 1/4 in |
Maximum Fastener Size | 9/16 in | 5/8 in | 5/8 in | 9/16 in |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | HDX | Surebonder | Freeman | RYOBI |
Name | Pneumatic 20-Gauge 9/16 in. Fine Wire Stapler | Pneumatic Upholstery Stapler with 22-Gauge Upholstery Staples (3/8 in., 7/16 in. and 5/8 in.) | Pneumatic 22-Gauge 5/8 in. Upholstery Stapler | 18-Volt ONE+ Cordless Compression Drive 3/8 in. Crown Stapler (Tool Only) |
Price | ||||
Ratings | (8) | (229) | (18) | (791) |
Power Type | ||||
Minimum Fastener Size | ||||
Maximum Fastener Size | ||||
View Product | View Product | View Product | View Product |
This item is not stocked in Home Depot stores. You can purchase it online at homedepot.com. Internet #203477434 Model #9615A-300-3. Thank you, Surebonder
It should, I have upholstered several chairs and couches with it, all had hardwood frames.
I'm using a small ridgid battery powered unit that is tiny and portable . No problem. I think my little compressor does like 2.5 @90...for some light reupholster work at home this set up has been perfect.
Hi, The staples are of different lengths. The crown length is the same on all of them.
You probably would want longer and thicker staples to hold up to weight and weather.
It should. I use for making patterns out of 1/4” plywood.
They do not say they are and they are magnetic. So I’m pretty sure that they are not. They do seem to be coated maybe a light galvanized.
Full description and user manual both state that stapler will drive 1/4 inch leg staples.
Yes and it will need a pressure regulator.
The staple crown is 3/8"