|Actual Product Length (ft.)||8 ft||Actual Product Thickness (in.)||1.75 in|
|Actual Product Width (in.)||8 in||Coverage Area (sq. ft.)||5.33 sq ft|
|Nominal Product Length (ft.)||8 ft||Nominal Product Thickness (in.)||2|
|Nominal Product Width (in.)||8 in|
|Appearance Board Type||Hardwood Boards||Board Joint Type||Square Edge|
|Fastener recommendation||glue and nails||Features||Stainable|
|Finish Type||Unfinished||Lumber Grade||FAS|
|Material||Walnut||Moisture content||Kiln Dried|
|Number Of Boards Per Pack||1||Returnable||90-Day|
|Manufacturer Warranty||90 day|
A: Yes, the 12-16 inch wide would be best option to ensure 12 inch
A: Hi DonR, I would recommend glue and nails and a clear poly finish. These are sanded but we recommend removing and sanding off the bark before finishing.
A: Hi Fumfy, These are used for this application all the time. The slabs are normally pretty straight around 10-11'' wide throughout the whole slab.
A: Hi Patw, Most people peel off the bark and sand the edges and top and bottom. After that most people use a poly finish or an epoxy bar top finish. Feel free to reach out to us at 818-953-5350 for more questions.
Nominal Product Length (ft.)
Board Joint Type
Coverage Area (sq. ft.)
5.33 sq ft
7.5 sq ft
18.33 sq ft
8 sq ft