I took delivery of my SM-1T205 toilet on July 4 and measured the distance from the left most mounting bolt hole to the furthest part of the toilet skirt at the floor below the tank. It measured 4 inches, thus it was in conflict with the water line at 3 inches. Now I either move the water line or send the toilet back.
Hello, Our one piece toilets have 12" rough ins. Please consult your plumber or contractor for advice on alternative installation methods. Thank you, The Swiss Madison Team
Hello, You can shop universally for a seat that will fit. You will be looking for a bolt spread of 5.5" (measured center to center). Thank you, The Swiss Madison Team
We ahd to add a couple of fillers on the bottom to help balance to the toilet with the ceramic floors. This caused us to use more caulking to fill the gap which makes it look less desireable.
These are standard toilets so the depth is 12" to the closet bolts.
Hello, All of our toilets are 12" rough-ins. You will have to consult your plumber or contractor for advice on installing a 12" rough-in unit on an 11.5" rough. Thank you, The Swiss Madison Team
Hello, We cannot guarantee compatibility with outside brands. The SM-1T205 Sublime One piece toilet has a bolt spread of 5.5". The bolt holes are 2.5" inches from the water tank. Thank you, The Swiss Madison Team
Hello, All of our toilets have a 12" rough-in. You will need to consult a plumber if you wish to install this on another size rough-in. When installed on a 12" rough-in, the space between the tank and the wall is variable, as the toilet tank curves. Thank you, The Swiss Madison Team