#1 Home Improvement Retailer

Internet # 322910451

Model # SID23229

Product Images

1/2 in. Drive x 1-1/8 in. Deep 12-Point Impact Socket

$9.40
  • Has high-visibility laser markings and permanent stamped markings
  • Meets a minimum of 1.3 times the ANSI standard for proof torque
  • Works with both friction ring anvils and detent pin anvils
  • View More Details

Free & Easy Returns In Store

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Tekton deep impact sockets have 2-size markings—both a high-visibility laser marking and a permanent stamped marking. The interior well of the socket extends fully into the socket, which allows for better fastener engagement in more situations. Each socket works with both friction ring and detent pin anvils. Smooth walls without grooves support friction ring engagement, and a detent pin hole on one side allows you to decide whether to engage the pin. Radiused corners on the socket prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners. Part by part, we choose the best combination of steel alloys, heat treating specifications, and forming processes to meet the highest performance requirements. This socket has a corrosion-resistant manganese phosphate coating.

Highlights

  • 2-size markings – the size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking
  • Full-length socket well – while the overall socket is a shallow length, the interior well extends fully into the socket, which allows for better fastener engagement in more situations
  • Works with friction ring or detent pin anvils – smooth walls inside the drive end and a detent pin hole make the sockets compatible with both drive tool anvil types
  • Prevents fastener round-off – radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners
  • High-performing steel alloys – this socket is made from 50bv30 chromium-vanadium (cr-v) and has a corrosion-resistant manganese phosphate coating
  • Return Policy

Product Information

Internet # 322910451

Model # SID23229

Additional Resources

Shop All TEKTON
From the Manufacturer

Specifications

Dimensions

Drive Size

1/2 in

Socket Size

1-1/8 in

Details

Color Family

Black

Hand Tool Type

Impact Socket

Individual/Set

Individual

Material

Steel

Measurement Standard

SAE

Number of Pieces

1

Points

12-point

Returnable

90-Day

Socket Depth

Deep

Socket Type

Impact Socket

Tools Product Type

Hand Tool

Universal

Non-Universal

Warranty / Certifications

Manufacturer Warranty

No time limits, no receipts: tekton.com/tool-help

Questions & Answers

what is the biggest size lug nut this will work on?
ByDec 26, 2025
1 Answer | 
Answer This Question

This is Mark from Tekton. This socket has an open end size of 18mm so it will work on 18mm fasteners like nuts, bolt heads, or fittings.

By|Dec 27, 2025


    What is the outer diameter of the socket
    ByMay 14, 2025
    2 Answers | 
    Answer This Question

    I don't have the answer because I have the same question, but Tekton Support's answer can't be correct. A 30mm socket outside diameter can't be less than 30mm. 1.1 inch is about 28mm. I'd like to see a correct answer to the question.

    By|Aug 18, 2025

      This is Mark from Tekton. The outer diameter of this socket is 1.10 inches.

      By|May 15, 2025


        Viewing 1-2 of 2

        Customer Reviews

        4.7 out of 5

        • 4.7 out of 32 reviews
        • 100% recommend this product
        Filter by:
        Showing 1-10 of 32 reviews
        These sockets are great for our new torque em extended wheel sockets.
        by
        These are good quality sockets we used to make a special tool from.
        by
        • Verified Purchase
        not hardend steel
        Would not drive tapcons in concrete. Rounded off on the inside. I had a 50 year old craftsman socket that worked
        by
          • Recommended
          Arrived fast,in great shape, can use them with hand tools or impacts, and a great price.
          by
          • Verified Purchase
          This customer chose to rate the product and not provide text.
          by
          • Verified Purchase
          This customer chose to rate the product and not provide text.
          by
          This customer chose to rate the product and not provide text.
          by
          It is a good quality impact socket. It was very affordable and a perfect fit what I was trying to do
          by
          • Verified Purchase
          Fit perfectly and the price is very norminal
          by
          This customer chose to rate the product and not provide text.
          by
          Showing 1-10 of 32 reviews

          Compare Key Features

          current item

          Product Snapshot

          Built for impact tools, this 1/2 in. drive impact socket features laser-etched markings for easy identification. Ideal for recessed bolts.
          Built for impact tools, this deep socket features laser-etched markings for easy identification. Ideal for reaching recessed bolts.
          Built for impact tools, this 1/2 in. drive, 1 in. deep impact socket offers laser-etched markings for easy identification.
          Built for pros: high-performing Cr-Mo steel impact socket with laser-etched markings for easy identification.

          Drive Size

          1/2 in
          1/2 in
          1/2 in
          1/2 in

          Socket Size Range

          1-1/8 in
          7/8 in
          1 in
          1-5/8 in

          Material Composition

          Steel
          Steel
          Steel
          4140 chromium-molybdenum (Cr-Mo) steel

          Finish Coating

          Manganese phosphate

          Impact Rated