Internet #204962775

Model #4006062600

Store SKU #1000021166

Store SO SKU #158356

600 ft. Board Polyurethane 2-Component Spray Foam Kit

  • Expands and cures quickly to fill gaps, expansion joints and more
  • Moisture-resistant kit also provides sound and thermal insulation
  • Won't shrink, compress or settle to ensure a durable hold
  • See More Details
$77000

Frequently Bought Together

+
+
Price:
$77000

Product Overview

Touch N Foam Logo

DAP Leading in Innovation

Founded in 1865, DAP is a leading manufacturer and supplier of caulks, sealants, foam, adhesives, and patch and repair products.

2 Component System In 3 Different Sizes

2K Systems for Small & Large Jobs

Disposable kits in 3 sizes provide quick and easy application for repairs, renovations and new additions.

Touch N Foam Spray Can Be Used Throughout The House

Complete projects all around the home

Use Touch ‘n Foam 2K foam kits on projects throughout the home to improve comfort and save on energy costs.

ICC YIELD CHART

ICC Listed + Meets Multiple ASTM Specs

DAP Touch N’ Foam Spray Foam stops drafts, reduces sound transmission, resists moisture and improves R-value.

INSULATE YOUR WALL CAVITIES

Insulate Wall Cavities

Insulate stud wall cavities up to a 2” fill to create a barrier that is virtually impermeable.

Enhance Fiberglass with Spray Foam to get a Full Air Seal

Enhances Fiberglass

Touch N’ Foam Spray Foam combined with batt insulation provides the best energy savings & optimal efficiency.

FILLING IN ATTIC AND BASEMENT WALL CAVITIES

Attic & Basement Sealing

Touch N’ Foam improves home comfort by sealing and insulating attic floors, basement walls and rim joists.

SAVE UP TO 30% IN ENERGY SAVING

Save Energy

Seals out air and moisture saving on energy costs all year round.

TOUCH N FOAM HAS A 60 SECOND DRY TIME

Fast Cure

Dry and tack-free in 60 seconds; fully cured in approximately 1 hour.

Touch N Foam Is Completely Closed Cell For A Better Air Seal

Closed Cell Structure

Closed cell structure, high density and higher R-value for better insulation.

Touch N Foam is Reusable For Up to 30 Days

Reusable

Foam kits can be stored and reused within 30 days of the initial application.

Class A Fire Resistant

Class A Fire Rated

Meets Class 1 criteria using the ASTM E 84. Class Rated fire resistance.

FIBERGLASS ICON

Increased R-Value

Spray Foam combined with your typical fiberglass insulation will assist with a higher r-value.

Touch 'n Foam 2-Component Spray Foam expands and cures quickly to fill cavities, gaps, cracks, expansion joints and other sources of air leakage in a building envelope. Resists moisture that can lead to mold or mildew and provides increased sound and thermal insulation. Will not shrink, compress, settle or biodegrade like fiberglass or cellulose insulation. Bonds to a variety of materials, including wood, masonry, metal and drywall.
  • Touch 'n foam 2-component insulating spray foam kit dries in 2 to 5 minutes to seal cavities, gaps, cracks, expansion joints and other sources of air leakage
  • Covers 200 Sq. ft. at 1 in. thick and R-value is 6.2 at 1 in. thick
  • Class 1 fire resistance, ICC evaluation service listed, report #ESR-3052
  • Resists moisture that can lead to mold or mildew
  • Must be applied when surface and air temperatures are above 60°F
  • Dries in 60 Seconds to create a permanent airtight seal
  • Easy to Use - Just Point and Spray
  • Reduces Energy Costs up to 30%



  • How much do you need? Let our calculator help:
    Insulation calculator button

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Coverage Area (Sq.Ft)
600
Product Height (in.)
18.75
Product Width (in.)
25

Details

Compatible Install Surface
Concrete,Existing Drywall,Plywood,Wood
Cure Time (hours)
1
Dry to touch (min.)
5
Install Temperature (F)
70
Insulation Features
Fire Block Rated,Paintable,Stainable
Insulation R-Value
R5.48
Insulation R-Value per Inch
R6.2
Insulation Type
Spray Foam Insulation
Number of Pieces
1
Product Weight (oz.)
1728.000 oz
Returnable
180-Day

Warranty / Certifications

Warranty Information
Manufacturer warrants this product to be free from defects and shall not be liable for any consequential or other damage or remedy. Our sole obligation and your exclusive remedy are limited to product replacement. For more info. call 1-800-325-6180.

Questions & Answers

513Questions5Answers

how many kits to cover 8 inches deep in a 24 foot by 24 foot floor?

Asked by BENJAMIN October 18, 2020
0
Answers

does this stick to metal

Asked by Harold October 18, 2020
0
Answers

Can it be be applied in multi coats to more than 2"

Asked by Michael October 11, 2020
0
Answers

How long are the hoses?

Asked by NewNorm October 10, 2020
0
Answers

I have a concrete walled basement. Do i spray then frame, or can I frame and then spray between t...

Asked by puzman747 October 9, 2020
0
Answers

Does this come with a second replaceable nozzle, if not where can I get some?

Asked by Lisa October 3, 2020
3
Answers

Yes, can't remember how many extra nozzles, but plenty to get the job done.

does this product work over head?

Asked by Moose October 3, 2020
2
Answers

Yes, it works well. I used this product to insulate under a roof and walls. Overhead, it was a bit messy - some overspray will fall down - so wear old clothes and protect your face, eyes, hair and wear a painters mask if you are inside. Once the insulation is cured, you can even paint it. Our application is inside of a small wooden shed. Insulated under the floors too.

If it is closed cell what topcoat would you recommend

Asked by Dave September 21, 2020
0
Answers

Is this a close cell insulation and cannot be used outside?

Asked by Dave September 21, 2020
0
Answers

will this stick to a metal building

Asked by jw September 21, 2020
0
Answers

600 ft. Board Polyurethane 2-Component Spray Foam Kit - page 2

Customer Reviews

  • 541 Customer Reviews
  • 3.4 out of 5 stars overall
61% of customers recommended.
Overall Ratings
5star-icon(192)
4star-icon(114)
3star-icon(53)
2star-icon(49)
1star-icon(133)
Sort By:
What a mess!!!
Quality :
1
Value :
1
Read instructions - seemed simple - pull the tab it opens both cans and off you go. Instead - the tab was hard to pull, one side broke off, finally opened it up - one rank started to leak immediately into the box, the other didn't even open. I started spraying only the brown goo and ended up ripping the tanks out and manually screwing the nozzles back on.
Was this helpful?
0
0
Chemical A ran out.
Quality :
4
Value :
4
I really loved this product! I watched the dvd and followed all the instructions. I made sure all the temperatures were within the limits prescribed and everything went well and I was very happy. The reason I am giving this product 4 stars instead of 5 is because chemical A ran out before chemical B did. I bought two of these 600 packs and both of them had this same problem. On both packs I made sure that both valves for the chemicals were open all the way, that the hoses were tight but not too tight so there were no leaks, and made sure that the hoses were never kinked. I believe that if both packs I bought used the chemicals in a better ratio so they run out at the same time I probably could have finished all the outside walls of my basement. Overall I would highly recommend this product. My basement already feels like it is at a more constant temperature, it is sealed up, and looks great.
Was this helpful?
2
0
Theory is great, application and quality didnt come through
Quality :
1
Value :
2
I needed a little more product for a large product and thought I'd give this brand a try. While applying this stuff is never "easy" and you need to be careful with temperatures and keeping everything flowing and clean, this product struggled from the beginning and turned into a mess for the garbage can. The tanks started off strong for all of a minute or so before the B product (which is a nasty liquid until properly mixed) started leaking from the tank threads and quickly messing up the pressurization. I eventually got the leak under control and blocked with putty but by then the tank had lost the pressure needed to adequately mix. The final product never got the right mix and turned into slimy goo that will not cure. Its going to take hours to clean it out and start over. I think had the tank not been defective (or I'd been able to tell in time to return them and not start it flowing) it would have been effective. It was for about a minute before things went south.
Was this helpful?
6
0
Response from DAP Product ExpertAugust 5, 2020
Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 600 Kit. Based on your commentary regarding the "leaking" that you describe, it is like that the hose line was not properly connected. The most common causes for this condition are cross-threading, not applying sufficient torque to ensure a seal and/or over-torqueing, which can crush the fitting: "Tighten hose fittings with wrench provided. Do not overtighten". The texture/consistency issues that you describe can result from the product was being dispensed in an "off-ratio" manner (the blend of A and B components out of specification. The application of off-ratio product can lead to poor foam structure (low expansion, weak/brittle, too soft/poor hardness etc.) The most common reasons for this condition are attempting to spray through valves that are not opened equally: “Fully open valves on both cylinders by turning counter-clockwise until a slight resistance is felt” and/or attempting to apply the chemical through a restricted/partially clogged nozzle: "If spraying has stopped for more than 30 seconds, foam in the nozzle will begin to cure and clog, and system performance will be compromised". To verify that the chemicals are being applied in proper ratio, we recommend a "test application" prior to actual use: Spray a small amount of foam on scrap material to check chemical mix. The foam should be off-white in color and be tack free within 30–60 seconds." Lastly, Troubleshooting: If cured foam appears either lighter or darker in color immediately after spraying, one component may be blocked or empty. Immediately stop spraying and do the following:1. Check both valves to be sure they are fully open.2. Look for and fix any kinks in the hoses.3. Remove the nozzle, clean off any residual liquid or foam. Check to be sure two roughly equal chemical streams exit the foam applicator barrel by dispensing into a waste receptacle.4. Verify that the chemical, ambient, and substrate temperatures are within the suggested ranges.5. For additional assistance, contact DAP’s Technical Customer Service Department at 888-327-8477. All of the above-referenced information can be referenced in the enclosed product usage instructions, DVD as well as website usage videos. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and to provide you with additional trouble shooting guidance.tional information from you and to provide you with additional trouble shooting guidance. DAPFoam
Did not cover the square footage it said it would. Had to get a second set of bottles to finish....
Did not cover the square footage it said it would. Had to get a second set of bottles to finish. Should have just hired the company to do it by the time I had to pay for the second set of bottles. Other then that the product did perform as I hoped.
Was this helpful?
0
0
Response from DAP Product ExpertJuly 24, 2020
Thank you for posting your feedback on the DAP Touch ‘n Foam Pro System 600 Kit. The Touch ‘n Foam Pro System 600 kit provides up to 600 board feet of polyurethane spray foam (600 sq. ft. @ 1" thickness). Even small variations in the depth/thickness of applied foam can significantly impact the product's coverage rate. Because you did not indicate what your application depth/thickness was or provide any background on your application technique, application conditions or project background, it is difficult to provide a proper response in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information regarding your experience. DAPFoam
Inconsistent. 2 out of 3 kits malfunctioned
Quality :
2
Value :
3
I purchased 3 kits this morning for a small closet project. Two of the kits malfunctioned upon activation. The canister on the right leaked all of its contents after black strap was pulled up to activate kit and I only got about 25% of the product on the wall. The other kit worked well and there was no problem. All 3 kits were good until September 30. Temperature was not an issue as it was 86* today. The product that actually made it on to the wall came out as expected. Not sure why two of the kits malfunctioned and pretty much wasted the product. Disappointed in the performance especially since its not cheap.
Was this helpful?
5
0
Response from DAP Product ExpertJuly 22, 2020
Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kits that did not perform satisfactorily. When calling in, please have the foam kits available, as we will need to collect production information from them. DAPFoam
useless crap.
Followed the instructions exactly. When engaging the nozzles, one sprung a leak half way through the process thus spilling nearly all of the contents of that can into the box. Got maybe 1/10 of the foam from the sprayer as I should have.
Was this helpful?
5
0
Response from DAP Product ExpertJune 19, 2020
Thank you for posting your feedback. We're sorry to hear about your experience with Touch ‘n Foam Pro System 15 Kit. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and so that we can arrange to provide you with replacement (or refund) for the Touch ‘n Foam Pro System 15 Kit that did not perform satisfactorily. DAPFoam
Great when used right
Quality :
5
Value :
4
I used to work for a spray foam insulation company and have gone through many froth paks over the years. I no longer work in insulation and needed this to seal my own crawl space. These are very temperature sensitive. I used mine during the spring after leaving these in the sun for most of the day (high was 65 degrees). Pay attention to how the gun is spraying. If you are using the fan tip, if you noticed the spray is splattering and not coming out in a clean line, change the tip. Pay attention to the canisters. Every time you have to move, pick up both canisters. I noticed the red canister was draining faster than the white one, so I closed the canister a full turn. Later, it was still lower so I closed it one more turn. Spray in even lines back and forth as you move your hand up or down. Try to keep the gun at the same distance the entire time. As others have said, it does not last long after it’s been used, so try to burn through the whole kit in the job if possible. If you get some foam in your skin, a little acetone or mineral spirits will clean it off real easy.
Was this helpful?
15
0
For any decent R-Value you will need to perform multiple layers over a relatively small area. All...
Quality :
3
Value :
4
For any decent R-Value you will need to perform multiple layers over a relatively small area. Allow 5-10 seconds for the area to rise before adding another pass-over. If you stop spraying for more than 10 seconds change the tip. This product worked very well to finish the small covering that I needed. For a large or standard room size, I much preferred the 650 sq. ft. competitor, the foam came out without falling to the floor.
Was this helpful?
2
0
Response from DAP Product ExpertMarch 30, 2020
Thank you for your feedback. As indicated in the product literature for the DAP Touch ‘n Foam Pro System 200/600 spray polyurethane foam kits: "High R-value = 6.2 per inch and Spray up to 1" for the first layer of cured foam. (NOTE: 1/2" of wet foam equals 1" of cured foam.) For best adhesion to the substrate, a 1/2" first layer is recommended. The wet chemicals normally expand two to three times the original volume. Apply additional layers of up to 1 inch of foam until desired total thickness is reached. Allow foam to cool between layers to avoid excessive heat and maximum expansion. 2" Maximum Depth Fill." We are not clear as you your commentary referencing a competitive 650 board foot foam kit, as it appears you are comparing DAP's 200 board foot kit instead of DAP's equivalent 600 board foot kit. Should you wish to discuss this with us, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477. DAPFoam
worked great
worked great
Was this helpful?
1
0
Used for basement remodel. Went on smooth dries in a minute and covered more than I had planned. ...
Used for basement remodel. Went on smooth dries in a minute and covered more than I had planned. Will definitely use again if I do the other side. The li
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers