Bodden Bay 12 in. x 12 in. Terra Cotta Peel and Stick Vinyl Tile (30 sq. ft. / case)

Good morning. Thank you for reaching out to us with your question. The flooring itself will not be affected by water; however, if water is allowed to lay on the floor and penetrate the seams of the tiles, it can cause the adhesive to fail and cause issues with the subfloor. I hope this information is helpful. Have a great day.

Cuts with regular utility knife.

Brown, terra cotta (orange tones), some gray. The picture is an accurate representation.

It has a low gloss surface. I installed this 2 years ago and with routine cleaning with a mild, pH neutral soap and water, it still looks good.

Good morning. Thank you for reaching out to us with your question. I apologize for the inconvenience; however, we don not have a matching stair nose trim piece for this flooring. We recommend using one of the stock stair nose edge trims that are typically found in your local store. I hope this information is helpful. Have a great day.

Good morning Debra. Thank you for reaching out to us with your question. This flooring does not need grout for installation. The grout lines are already a part of the design of this tile. I hope this information is helpful. Have a great day.

I don't know how thick it is but we installed this ourselves two years ago and it is in perfect condition. absolutely no wear or tear is showing! We put this in all three bathrooms. It's a great way to update at a low cost

First measure the area you want to cover and then divide it by 30, and that would be the number of cases you need. There are 30 sq ft per case.

Good Morning, I would recommend that your order the tile from your local Home Depot store. I am sure they will be glad to help you. Good luck on your project.

Good afternoon. Thank you for reaching out to us with your question. I apologize for the delay in responding to your inquiry as recent technical difficulties have impacted our ability to respond. This floor can be installed over existing on grade or above vinyl tile flooring as long as the existing flooring is fully glued down, clean and free of waxes and polishes, and is flat and smooth. Any texturing will need to be smoothed over with S-194 Patch, Underlayment & Embossing Leveler mixed with the S-195 Underlayment Additive. It can also be installed over existing ceramic tile flooring as long as the ceramic is firmly bonded, clean, dry and dust-free. Check for cracks, scaling, levelness, and other damage. Grout lines and other texture on the ceramic will need to be leveled with S-184 Patch & Skim Coat or S-194 Patch, Underlayment & Embossing Leveler mixed with the S-195 Underlayment Additive. Here is a link to our installation instructions for this floor. https://sforce.co/2xEDEin I hope this information is helpful. Have a great day.