D&D 5-1/8 in. x 3-3/4 in. Black Self-Closing Vinyl and Wood Gate Hinge (2-Piece)
$42.47
Pay $17.47 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- D&D hinge has large fixing leafs for added strength
- Easy & simple tension adjustment
- Made with UV-stabilized polymer & stainless steel closing spring
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Dimensions: H 3.75 in, W 5.13 in, D .5 in
Questions & Answers
15Questions
Q:How far will they open up? Just to 90� or will it go wider.
by|Nov 12, 2023
0 Answer
Q:How much weight can these hinges hold?
by|May 11, 2023
1 Answer
Q:Can these be used to make a vinyl outdoor shower stationary wall into a functional gate?
by|Apr 15, 2023
1 Answer
Q:I just need a hinge to act as a spring to close a pre-hung half gate, would it work if the mounting wall/fence is 90 degree from the gate when closed? I know I would have to adjust the spring load, but wondering if the gate would still close/open.
by|Jun 13, 2022
1 Answer
Showing 1-4 of 15
5
73
4
21
3
5
2
4
1
20
Feb 2, 2021
So far so good on a complete cedar fence. These are holding up well to cold wet Indiana and are ...
So far so good on a complete cedar fence. These are holding up well to cold wet Indiana and are holding their automatic closing pressure. Typically this can fail quickly requiring more or less tension to close the gate but this has held its place without any adjustments. I am really liking the quality thus far because it holds it place and does not move or shift. I do recommend larger\longer screws.
by
Jan 12, 2021
If you are looking for a vinyl and wood gate hinge, this seems to be made of some very strong mat...
If you are looking for a vinyl and wood gate hinge, this seems to be made of some very strong material that leads it to be quite sturdy! Overall pretty happy with this hinge as we needed to replace our current hinges on our exterior door. I do wish in some cases that the predrilled holes were a bit further to the edges but I was able to work through that by drilling my own holes into the piece.
by
Dec 28, 2020
The Tru-Close black self-closing wood gate hinge is a quality product. We've been using this for...
The Tru-Close black self-closing wood gate hinge is a quality product. We've been using this for about a month now and have appreciated its usefulness. Before installing this, our gate would remain wide open at 180 degrees so our dogs could get out. I wanted something to close it in case that happened. The hinge was easy to install and has worked well so far. I have a 4' tall by 4' wide wood picket gate so ours does not have much weight to it. I didn't want to remove the original more decorative hinges so I just added these in addition to the others to use the gate close functionality. The instructions say to install both, but I only installed one. It closes the gate well each time. The first few times it shut it completely so that it latched. After owning it for a month, the springs seem to have loosened. It closes it, but does not have the force to slam it onto the latch. It is an easy adjustment though. The one negative I have about this is that it is hard to open the gate to 90 degrees. It makes a creaking sound and is requires extra strength to open. Our garbage cans are behind this door so it can be a chore to open past this point in order to get them out. I guess it is a trade off though if I want to keep the gate shut.
by
Dec 17, 2020
These Black Self Closing gate hinges are adjustable for how much spring force you want on the clo...
These Black Self Closing gate hinges are adjustable for how much spring force you want on the closing speed. They have a nice design and appear to be made of high quality plastic. The package says it is a polymer construction. The internal spring is Stainless Steel and has a limited lifetime warranty. It is rust and corrosion proof. These hinges can support up to 66 pounds for a 3 ft wide x 5 ft high gate. I have used metal self closing hinges before and like them. However, I like that these are made of polymer and stainless steel and are rust and corrosion proof. These should last for a very long time. Black 1 in self drilling screws are included.
by
Dec 17, 2020
This Tru-Close gate hinge replaced some old, rusty hinges on a wood gate. The weight limit for th...
This Tru-Close gate hinge replaced some old, rusty hinges on a wood gate. The weight limit for the Tru Close is 66 lbs. and although I didn't weigh the gate, it has to be pretty close to that limit. So I wasn't sure if the included wood screws would be strong enough and I wasn't sure the self closing hinges would really self close. It all worked out great though, the screws held and after adjusting (increasing) the tension, the gate closes on its own. Adjusting tension requires only a flat blade screwdriver.
While I don't know how the well the Tru Close hinges will hold up after a few years exposed to the weather, I know they won't rust, they look good, and were very easy to install. If you're concerned about the weight limit, Tru-Close makes similar hinges that can support more than double the weight of these.
by
Dec 17, 2020
Small size with heavy weight rating, plastic body with steel internal spring which is adjustable ...
Small size with heavy weight rating, plastic body with steel internal spring which is adjustable from the top or bottom.
Overall the hinges seem to be well-made with good plastic framing on the body but since the adjuster is open at the top and the spring inside is steel, it seems that water will constantly run into the spring and cause it to rust over time.
Time will tell but my gut tells me it will freeze up if not oiled regularly over time.
by
Dec 2, 2020
These seem to be very sturdy hinges for vinyl material. They are large and made to be part of th...
These seem to be very sturdy hinges for vinyl material. They are large and made to be part of the finished look not blend into obscurity. The self closing mechanism is very tight and I would think should close even very heavy gates or doors. The screws come with it, but here in Florida I am opting for buying a larger screw anyway. Just a note the hinge is too wide for a 1 1/2 inch surface like the short side of a 2 x 4.
by
Dec 1, 2020
Regular duty hinge. Black finish matches the D&D latch set. Both hinges will close up to 66-pou...
Regular duty hinge. Black finish matches the D&D latch set. Both hinges will close up to 66-pound doors. Adjustable for weight of door and speed of closing. The packaging states for 3 ft by 5 ft gates. Polymer hinge plates are large 5-1/8 in. x 3-3/4 in. and control the gate. Easy to install and sealed well for long life without lubrication. Adjustable from either end of the joint. The adjustment is done by depressing hard on the joint and can be adjusted in incremental levels of tension.
by
Nov 24, 2020
Have a vinyl gate to the back yard. It's pretty heavy so I was worried this hinge (pair) wouldn'...
Have a vinyl gate to the back yard. It's pretty heavy so I was worried this hinge (pair) wouldn't work well. Well it exceeds my expectations. No issue handling the gate and closing well. No droop, solid construction. There is a tension spring that can be adjusted. I have it at it's lowest setting to still close the gate (to slow it down). Works great!
by
Mar 31, 2020
Love the look, works very well.
Love the look, works very well.
by
0/0
Compare Similar Items
Material | |||
|---|---|---|---|
Plastic | Stainless Steel | Plastic | |
Product Width (in.) | |||
5.13 in | 0.62 in | 6.81 in | 6.5 in |
Related Searches
Related Products
Barrette Outdoor Living offers a wide variety of hardware for most gates. The Heavy-Duty Modern Wrap Hinge features 3-way adjustability: vertical, horizontal and tension adjustments. An advantage that allows you to customize the resistance and speed of your gate closure. This creates a gate that is self-closing and will meet pool safety codes, it's the perfect solution for a balanced gate. These DIY-friendly products are easy to install and operate and are designed to hold the heaviest gates to withstand a lifetime of openings.
The adjustment is according to closing speed, gate weight, and the resulting momentum generated by gate movement. The heavy gate hinges can be easily installed and used with all types of fencing including aluminum and metal fencing. Our heavy-duty hinges provide double-face fixing strength and are the safest investment you can make when it comes to hardware. If you are looking for gate hinges of heavy-duty nature, you have come to the right place. The heavy-duty hinges are made of polymer material and are reinforced by glass fiber. The heavy gate hinges are treated by UV rays and therefore have increased strength as compared to metal hinges. These heavy-duty hinges do not rust, they do not corrode, they require no lubrication, and they can survive all kinds of weather without any need for maintenance.
The D&D TruClose Heavy Duty Gate Hinges deliver dependable reliability for pool safety and general-purpose gates around homes, yards, and high-traffic gates. The durable hinges give you self-closing action, along patented tension adjustability for gate weight and closing speed. Constructed of industrial strength "metal replacement" polymer & stainless steel components that won't rust. The self-lubricating durability of these hinges mean they require no maintenance. Self-closes gates up to 154 lb.