A: If you are driving over the product it must be set in concrete. IF not driving over it, I recommend using rebar and tying it to the gaps of the feet of the channel to prevent floating.
A: I don't know the answer. This is something that I would ask from the manufacturer or an installer. Mine was installed by a professional. Sorry.
A: I would gently squeeze the open ends of the convertor together so they touch. Then use our poly adhesive sku 20095 in the groove of the converter and attach to the 90 degree corner.
A: Sorry no connector for 2 female end fittings. Take the female end from the main 40" L and make a cut between the ribbed sections 8" from the end. Trim the cut section to mirror a male end, then rotate 180º the female end to connect to the cut end. This will give you a male end fitting to connect to the Female end of the T.
A: Using end multi pipe adaptor sku 83355 or bottom multi pipe adaptor sku 83356 you can connect to 3" or 4" sch 40 or ABS, or 4" triple wall pipe solid or perforated. Using the end cap installing in reverse and cutting out the internal section, will allow to connect to 3" corrugated pipe.
|Brand||U.S. TRENCH DRAIN||U.S. TRENCH DRAIN||U.S. TRENCH DRAIN||RELN|
|Name||Deep Series 5.4 in. W x 5.4 in. D x 39.4 in. L Trench and Channel Drain Kit with Black Grate (3-Pack : 9.8 ft)||Compact Series Invisible Edge 9.84 ft. L x 5.4 in. W x 3.5 in. H Trench and Channel Drain Kit w/ End Caps and Connector||Deep Series Invisible Edge 9.84 ft. L x 5.4 in. W x 5.4 in. H Trench and Channel Drain Kit with End Caps and Connector||Storm Drain Deep Series 5 in. W x 5.25 in. D x 39.4 in. L Channel Drain Kit with Gray Grate (6-Pack)|
|View Product||View Product||View Product||View Product|