#1 Home Improvement Retailer

Internet #205322706

Model #4840

1,000 sq. ft. Wall-Mount Direct Vent Pellet Stove

  • Perfect for small spaces heating up to 1,000 sq. ft.
  • Large hopper provides up to 24 hours of use between refills
  • The direct vent design ensures an easy installation
  • See More Details

Frequently Bought Together

+
Price:

Product Overview

Fireplace fuel type
Mount type needed for this fireplace
Fireplace Warranty
Product dimensions, width.
Product dimensions, height.
Product dimensions, depth.
This revolutionary design is perfect for small spaces up to 1,000 Sq. Ft. This "euro styled" design provides a modern take on a traditional pellet stove heating design and delivers perfect heating performance while saving you money. The 4840 has a direct vent design avoiding the typical chimney installs of a traditional pellet stove. Best of all, everything needed is included in the box. All you need to do is supply the pellet fuel to get started. This stove uses a sturdy wall bracket and the installation provides minimized clearances and mounts similar to a flat screen TV. It has an integrated 24 lb hopper that can heat up to 24 hours of use between refills (low setting) and up to 6 hours on high. The digital control system with remote control is easy to use and makes adjustments a breeze. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Pellet Stoves

Top Rated1,500 sq. ft. Pellet Stove with 40 lb. Hopper and Auto Ignition
current product
1,000 sq. ft. Wall-Mount Direct Vent Pellet Stove
Wiseway 2,000 sq. ft. 40,000 BTU Non Electric Gravity Fed Pellet Stove2,000 sq. ft. EPA Certified Cast Iron Pellet Stove Black Enameled Porcelain with 40 lb. Hopper
BrandCastleUS StoveUS StoveAshley Hearth Products
Name1,500 sq. ft. Pellet Stove with 40 lb. Hopper and Auto Ignition1,000 sq. ft. Wall-Mount Direct Vent Pellet StoveWiseway 2,000 sq. ft. 40,000 BTU Non Electric Gravity Fed Pellet Stove2,000 sq. ft. EPA Certified Cast Iron Pellet Stove Black Enameled Porcelain with 40 lb. Hopper
Price
Ratings
(361)
(35)
(63)
(6)
Area Heated (Sq. Ft.)1500.0001000 ft²20002000
FeaturesAdjustable Thermostat,Adjustable feed rate,Air Wash System,Rear heat shield,Side heat shieldAdjustable feed rate,Rear heat shield,Side heat shieldAdjustable feed rate,Rear heat shield,Side heat shieldAdjustable feed rate,Air Wash System,Mobile home approved
MaterialIronSteelSteelCast Iron
IncludedHopper,No Additional Items IncludedHopper,No Additional Items IncludedHopper,No Additional Items IncludedBlower,Hopper,Legs
StyleClassic,Cottage,FarmhouseCoastal,Cottage,FarmhouseModernClassic,Farmhouse,Rustic
View ProductView ProductView ProductView Product

Specifications

Dimensions

Assembled Depth (in.)
12.4 in
Assembled Height (in.)
27 in
Assembled Width (in.)
36 in
Firebox Depth (in.)
6.5
Firebox Height (in.)
7
Firebox Width (in.)
4

Details

Area Heated (Sq. Ft.)
1000 ft²
Assembly Required
Yes
Color Family
Black
Features
Adjustable feed rate,Rear heat shield,Side heat shield
Heat Output (BTU/hour)
24000
Hopper Capacity (lb.)
28
Included
Hopper,No Additional Items Included
Indoor/Outdoor
Indoor
Material
Steel
Product Weight (lb.)
230
Returnable
90-Day
Style
Coastal,Cottage,Farmhouse
Total BTU
24000 Btu

Warranty / Certifications

Certifications and Listings
EPA Approved
Manufacturer Warranty
Limited LIfetime Firebox, 1 year Door and Heat Exchanger. 1 Yr. Elecrical

Questions & Answers

50Questions12Answers

Instalation service Looking to have it installed

Asked by Lee August 9, 2020
1
Answer

Are you needing an installer ?

Does Home Depot offer any kind of extended warranty?

Asked by Robert December 29, 2019
1
Answer

Not to my knowledge ? but that is a question for them.

The manual says the unit weight is 185 lbs. The Home Depot spec says 230 lbs. Which is correct?

Asked by Rick December 27, 2019
1
Answer

The product weighs 230 lbs.

When will this be back in stock?

Asked by kehrin November 15, 2019
1
Answer

NOW

Can this unit be placed under a window?

Asked by WB July 1, 2019
2
Answers

Most local codes will allow the venting to be near an inoperable window. If the window opens, it wont’ be able to be installed below it.

how heavy is this stove?

Asked by jimbo February 24, 2019
2
Answers

This item weights 230 lbs

Can you vent this up a chimney, instead of going out the wall?

Asked by phife February 7, 2019
1
Answer

This stove is specifically designed for the direct vent installation. It cannot be adapted for a chimney installation.

Can this stove work with dry corn ?

Asked by Pot43 January 23, 2019
1
Answer

NO. this will not work with corn. Please use Premium wood pellets only.

How does this unit function if there's a power outrage? Is there UPS sold separately for this uni...

Asked by cktlee July 26, 2018
1
Answer

this stove will not work if the power is out. we recommend that you have an Inverter generator or backup.

can it be installed under a window and how close to the floor can it be

Asked by William February 8, 2018
1
Answer

It requires a 4 foot clearance below any window that opens. It can be installed on the floor but you might need to use a floor pad.

1,000 sq. ft. Wall-Mount Direct Vent Pellet Stove - page 2

Customer Reviews

  • 3.8
    out of 35 reviews
  • 58% recommend this product
Filter by:
Showing 1-10 of 35 reviews
Wished it had a thermostat, but still a great product for smaller spaces.
Wished it had a thermostat, but still a great product for smaller spaces.
by Kit54
Several design flaws hamper the ability of this stove to perform. First is the right side of the ...
Several design flaws hamper the ability of this stove to perform. First is the right side of the unit needs a large removable panel to get at things. Why? Because maintenance happens and the auger system is garbage. First, the auger motor is seriously underpowered at 0.4 amp. Second, there is no support for the auger at the drop chute end so it churns around rubbing and galling the chute. Third, sawdust will collect at the bottom of the shaft which the auger blade rotates around a brass sleeve. It will frequently jam. I really wanted the unit to work, but that meant modifying it. So this is what I did. Pull the motor and auger out. Grind the nubs on the shaft that snag the pellets off. Insert a 1/2x3/16 nylon spacer on the shaft at the bottom. Reinstall the auger. Replace the wimpy 0.4 amp motor unit with a .7-1 amp 4 RPM CCW unit with a hole in the shaft for the attachment pin. You can get it for $46 online. Now the unit runs much better and will fire up and run with a full load of pellets in the hopper. If the above designs flaws were addressed, this would be a 4 Star for sure. Picture of the original and replacement motor attached.
by CaptSeabee
6 people found this helpful
So far my experience with this has been very good. It’s a great space saver and very easy to inst...
So far my experience with this has been very good. It’s a great space saver and very easy to install. I have it in my garage workshop. It self ignites very easily from one button and the five heat settings do work. The electronics don’t seem to understand the off switch though. For some silly reason it continues to spit out six or seven pellets after you’ve hit off. Cost wise its great value since all the (expensive) Duravent you’ll need comes with it. Quality is better than expected since it’s made in China which was a big disappointment for me. I called US Stove and asked them this specific question and got a wrong answer.
by Zero2Hide
I picked this product because it fit a specific requirement i had. I did not want a free standing...
I picked this product because it fit a specific requirement i had. I did not want a free standing stove. I also did not want to disable the fire place if the need to use it ever arrived. (extended power outage, etc.) the installation was easy once i was figured out how the tubing connected. the instructions was not super clear. but a few minutes sitting down and studying the pieces, it became clear. I had the install complete inside of four hours. (including locating the best location in the wall to maintain all the required clearances. with the unit running on high all day, the unit is just warm to the touch. the vent on the front is the only area hot enough to get your attention for obvious reasons. the cleaning cycle seems to be every two bags of pellets. But it only takes 10 to 15 minutes to clean. Fill the hopper, hit the button and go about the day. We are very happy with this unit, the electric heat has been shutoff ever since.
by NWbrewski
6 people found this helpful
We purchased our wall hung stove from an outside vendor in 2015. The door was damaged prior to s...
We purchased our wall hung stove from an outside vendor in 2015. The door was damaged prior to shipping and we contacted the manufacturer for a replacement door. We had no problem getting the replacement with proof of purchase. The company was helpful and professional. We removed and replace the damaged door in a very straight forward process. The installation was not complicated, but the unit is very heavy, so additional help to "hang" the unit is recommended. The unit was fired up immediately upon installation to burn off it off, as recommended. This unit is located in our vacation home (1000 sq ft) in the mountains at approximately 7000 ft elevation so the weather can be cool in the spring and fall. This unit keeps the home at about 68-70 degrees overnight on the lowest setting with 30-32 degree outside temps. The unit recently started shutting down overnight. After reading reviews from several sites, we decided that it was probably due to excess pellet dust in the hopper. We have been regularly cleaning the pot and heat exchanger, but not the hopper. RECOMMENDATION: set a regular cleaning/maintenance schedule for the hopper burn chamber and heat exchanger. We would recommend this unit for installation in any similar environment.
by FJBarr
10 people found this helpful
YESSS!!!! I love the Wall-Mount Direct Vent Pellet Stove! It's AMAZING.! No stress with starting ...
YESSS!!!! I love the Wall-Mount Direct Vent Pellet Stove! It's AMAZING.! No stress with starting it, quite in living space, no over taking any space in living area. I've had it two months and I LOVE IT.!!
by este123456
5 people found this helpful
Great Product!
Bought this for my 24'x24' Detached Garage/Mancave, Propane ate me alive last Winter, 2 months in & 100% satisfied with it, keeps my garage around 65 on lowest setting!
by Kurt
10 people found this helpful
the good, the bad, and the ugly
I have a love/hate relationship with this stove after 4 weeks of use. I love the design, and that it mounts on the wall. Nothing ugly about it. Unlike some other reviews, I've never had a problem with the auger delivering pellets. My only frustration (the bad) is that it takes 3-7 on/off cycles to ignite. Before the first attempt I clean the entire burn pot assembly. If the stove doesn't ignite in 10-15 minutes I shut it down, remove the pellets from the upper chamber of the burn pot, and try again. I note that everything is cold to the touch. I go through this process until I finally get ignition within 5-10 minutes after turning it on. Then everything works perfectly. I suspect I have a touchy Auto-Start Igniter. A neighbor is thinking of getting this stove after seeing mine. I can only recommend this stove to someone who is patient and willing to fuss with it. It is possible my stove's failure to readily ignite could be an outlier.
by wngr
Response from USStoveExpertFeb 12, 2016
Good to hear about your experience with our unit. The only thing it sounds like is the issue with starting the unit is when in shipping, we lay flame impingment baffle over the burnpot that should be moved to the top of the firebox before starting. If this baffle was not moved, it is causing a lack of airflow causing the pellets not to ignite. Any questions, please call 1-800-750-2723 EXT 5050. USSC
12 people found this helpful
This stove is easy to maintain. Being on the wall it is out of the way. The outside stays cool, ...
This stove is easy to maintain. Being on the wall it is out of the way. The outside stays cool, which makes it safe for the grandchildren and pets.
by KJ
Easy to install. It worked fine for three days,...
Easy to install. It worked fine for three days, then jammed. Using premium pellets, so dust shouldn't be an issue in three days. Cleaned everything, according to the manual, and removed the jam.Still jammed. So we threw the pellets away, cleared the jam, and filled it 1/3 way. Good so far.
by KolinD
Showing 1-10 of 35 reviews