36 in. x 96 in. Bronze Surface Mount Left-Hand Ultimate Security Screen Door with Meshtec Screen

Good looking, strong, and easy to install.

All around Supreme security door. Installed through Home Depot with RF installations. Looks great from inside view and is very secure when locked.

I have to surface mount this thing and I’m running into problem with getting into stud. My question is should I cut the stucco and basically build a frame to attach the door?

I LOVE this screen door! Its way beyond better than I thought it would be. I ordered it online and it was delivered free to my local Home Depot store. Easy pick up. My handyman had no problem installing it. It actually looks like there is no screen, my view out is amazing. Sturdy, secure, I wish I would have known about this door a year ago when I purchased my home.

Built out frame for clearance with 1x3's, hung door per instructions with temp screws, verified fit and works great!

This door is fantastic! I have had it installed for 3 months. I was nervous because of some of the negative comments posted here but I persevered and installed the door with ease. I was very diligent in accurately measuring and ensuring that I would have the clearances necessary to have a tight fit. I installed 3 1/2" pvc white trim around my stucco doorway to frame the new gate. I used 3" pvc trim screws with the plugs to conceal all the screws which binded tightly to the framing. The kit I purchased only had 2" screws and they wouldn't grab the studs. I went back to Home Depot and found longer screws for decks which worked brilliantly since they had the same head shape and my plugs still worked. Since my stucco tapers near the doorway, I used synthetic shims which I also got at HD and installed them wherever I installed screws. I broke the excess length of the shims off after the gate was finally installed. I also predrilled the pvc so my screws would slide through it so it wouldn't pull it flush with the stucco which would make it taper as well. I'll fill the gap with foam caulk saver and conceal it with latex caulk. Here are some tips: 1. Before mounting the hinge side jam, space out the assembly on the ground and take measurements to see how much clearance you will have on each side. You want to make sure that the locking side has enough clearance so your hand will have room to unlock the gate. Some people didn't account for this and have very little room to operate the lock. 2. The height of the jams is also critical. My door way is taller than the gate by a good margin. I decided to not have the top jam sit below my trim so I mounted it flush with the top trim. That leaves me with a 2.5" gap below to the threshold. I didn't use the bottom bar or the metal threshold that came with the kit since it wouldn't work in my situation. Instead, I installed a 3/16" thick piece of recycled epdm rubber which is 4" tall, purchased on amazon, and used automotive rubber trim adhesive and screwed it to the screen with stainless steel screws. Now I have a seal which sits flush with my existing threshold and will keep all the critters and rodents away and looks very clean. I like this option because I can custom fit the seal so there are no open gaps. The rubber comes in different thicknesses. 3. My wife wanted our front door key to work with the new gate. Since our existing door uses a Schlage keyset, I had to do some research. I visited my locksmith and they found the Ilco 52225SC-26D-0B. It fits right into the existing slot and matches the stock Kwikset keyway. The only difference is it's Schlage and can be rekeyed to your front door. Please note that this is for the 5 pin model. You can order the 6 pin but it's a different model. Officially, this isn't supported but the keyway doesn't alter the door in any way and simply slides into the slot. 4. When installing the trim pieces that cover the screw holes, one of them dropped an 1/8" and created a gap at the top when I was hammering. I used a 2 ft piece of rebar under the trim, put a piece of wood that was taller than the bottom of the trim underneath the rebar and gently pushed down on the other end of the rebar to lift the trim up. With this lever, the trim slides with gentle pressure. Don't try to remove the trim because you'll end up damaging it. 5. Unique Home Designs customer service is great. I had an issue with the latch guard screw hole being too big and they sent a new one out right away. Cheers to Owen Palmer who handled my situation. At first, I was against installing a metal gate since it makes the house look like a prison. When I discovered the Meshtec product I was swayed with its clean aesthetic. Now we can leave the door open in the summer and even sleep with just the gate locked. I'll install a wireless alarm sensor at the gate to add to our alarm system for peace of mind. The added bonus is when the kids bring their dogs, they love sun bathing and watching people walk by.

exactly what i needed. keeps dog out and able to see and hear kids play. dog was already putting dents onto our normal big back door. added spring closer from amazon to top left outside.

I am in love with the look of my new screen door! I wanted something that didn't have a lot of design in it so this is perfect for me. The functionality is great also, I understand the meshtec cannot be cut through, that provides me with a level of security. I did not go with the professional installation, my son & ex installed it themselves. It is probably not a beginner level install job, they have prior door install experience so you may want to keep that in mind, "however" it was not difficult for them to install. Also, there is an excellent step by step video on line that walks you through the install steps.

It was important to read the manual and watch the video to get the complete installation overview.

Quality product for an pretty straight forward installation for the common DIYer. Small amount of tools required and 2.5 hrs of installation for my challenging install.