- Perfect for exterior use on garage doors
- Lightweight reversible edges provide customized fit
- Moisture and insect resistance allow safe durable use
- View More Details
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
Veranda Cellular PVC Trim is perfect for exterior time applications or garage door surrounds, enabling you to never replace trim again. Veranda Cellular PVC Trim won't split, cup, rot or decay. Installation requires the same tools and fasteners as wood - cut it, route it, nail it and screw it.
Highlights
- Bright white in color
- Moisture and insect resistant
- Sealed edges
- Reversible
- Lightweight
- Will not rot, crack, splinter or split
- Resistant to mold and mildew
- Does not require painting, accepts paints and stains well
- Outstanding screw and nail holding
- Rigid, but also flexible to cold or heat bend to a degree
- Easy to work with - cuts, nails, screws, glues and routes like wood and better than wood
- Return Policy
Product Information
Specifications
Dimensions
Product Length (in.) | 96 in |
|---|---|
Product Thickness (in.) | .75 in |
Product Width (in.) | 2.5 in |
Details
Color Family | White |
|---|---|
Color/Finish | White |
Features | Paintable |
Finish Type | Finished |
Material | PVC |
Pack Size | 1 |
Product Weight (lb.) | 3.18 lb |
Trim type | Basic trim |
Warranty / Certifications
Manufacturer Warranty | N/A |
|---|
Questions & Answers
Says to treat like wood trim so is it ok to attach with a brad nail gun and 1-1/2” galvanized nails same as I use for composite trim?
Veranda HP Beadboard can be hand or power nailed the same as wood. In cold temperatures below 32°F, predrilling is recommended to prevent splitting or cracking. Use stainless steel or hot dipped galvanized fasteners designed for wood trim and cladding. For best results, use fasteners with thin shanks, blunt points, and full round heads. 8D finish nails or 2” #8 trim screws are acceptable provided they penetrate 1-1/2” through a flat, solid wood substrate into a framing member. Fasteners should penetrate a minimum 1-1/2” into framing member. Fastener heads should be flush with the surface of the trim or slightly indented and no closer than ¾” from the end of the board.
It says it’s 2 1/2” wide but I’ve noticed on other pieces of trim, especially trim board that it tends to actually measure a half an inch smaller so what is the actual width of this item?
The actual width of this item is 2.5 inches.
Are these boards foam cored, that is not wood or porous particle board filled (or OSB)?
They are solid PVC.
These boards are PVC throughout. They can be cut, routed, etc to fit your project needs.
Is this plastic? Can I heat it for shape
Because it is PVC, you can very carefully use a heat gun to possibly give it some bending.
Is this product a full 3/4" or slightly less.
Mine is 5/8 thick
Can corners be sanded to an eased or slightly rounded edge?
Yes, you can sand, rout or bevel the edges with a table saw to soften the edges.
Please consult your local Home Depot Pro Desk for recommendations for your specific project.
Do the PVC trim boards have a simulated grain?
Please contact your local Home Depot Pro Desk to see which specific products are available in your area.
No, they're pretty smooth, no grain at all.
I actually wanted to use this as trim around a bathtub surround, so what kind of nails or other fastener would I use to adhere it to the wall and it look decent and hold well?
I used this in the bathroom as a spacer between a shower door and the tub surround. I used some construction adhesive as well as stainless steel screws. It's rock solid now
Veranda HP Beadboard can be hand or power nailed the same as wood. In cold temperatures below 32°F, predrilling is recommended to prevent splitting or cracking. Use stainless steel or hot dipped galvanized fasteners designed for wood trim and cladding. For best results, use fasteners with thin shanks, blunt points, and full round heads. 8D finish nails or 2” #8 trim screws are acceptable provided they penetrate 1-1/2” through a flat, solid wood substrate into a framing member. Fasteners should penetrate a minimum 1-1/2” into framing member. Fastener heads should be flush with the surface of the trim or slightly indented and no closer than ¾” from the end of the board.
Viewing 1-8 of 9
Customer Reviews
4.8 out of 5
Loading Recommendations
Related Products
1-3/4 in. x 5/8 in. x 96 in. Shingle Moulding, PVC
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
1-5/8 in. x 5/8 in. x 96 in. Shingle Moulding, PVC
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
