|Maximum Hose Length (ft.)||11.5 ft||Maximum tip size (in.)||0|
|Product Depth (in.)||13.58 in||Product Height (in.)||14 in|
|Product Width (in.)||16.65 in|
|Applicator/Tool Type||Paint Sprayer||Compatible Paint Type||Exterior Paint, Interior Paint, Polyurethane/Lacquer, Primers, Sealers, Stains|
|Cycles Per Gallon||0||Features||Onboard Storage|
|Flow rate (gallons per min.)||0.14||Hose length supplied (ft.)||11.5|
|Included||Case Included||Interior/Exterior||Exterior, Interior|
|Kit||No||Maximum Operating Pressure (PSI)||3 PSI|
|Minimum operating pressure (psi)||3||Number of Spray Settings||15|
|Operating Pressure (psi)||3||Paint Sprayer Type||Stand|
|Paint Sprayers Product Type||HVLP||Performance Features||Low Overspray|
|Power Type||Electrical: 120/60/1||Product Weight (lb.)||12.8 lb|
|Pump Type||HVLP||Recommended Annual Usage (GAL./YEAR)||50|
|Returnable||90-Day||Spray Tip Pattern Size (in.)||12(in)|
|Spray Tip Size||1||Trigger Configuration||One Finger Trigger|
|Usage Type||Light Duty|
|Manufacturer Warranty||1-year limited|
A: The iSpray cup is 3 15/16" opening at the top. The Detail Finish cup is 2 15/16" opening at the top. Good luck with all your projects. Call us for more help at 1-800-328-8251.
A: We usually suggest this model for bedliner - https://www.homedepot.com/p/Wagner-MotoCoat-Specialty-Coatings-HVLP-Stationary-Sprayer-0529031/205929279
A: The handle and iSpray front end (the larger one) without any coating in it weigh about 1 1/2 pounds. If you have any further questions or would like to discuss this feel free to call us at 1-800-328-8251.
A: The Flexio 5000 comes with two nozzles. The iSpray is set up for your fence, deck and walls and it will leave a roller like texture. The Detail Finish nozzle is set up for your trim, furniture and cabinets and it can leave a fine finish using thin or thinned materials. Also, there are a few things you can do to paint/stain to ensure it sprays well. 1 - Stir the paint/stain with a mixer in a drill until its creamy smooth, about 1 min per gallon 2 - Strain the paint/stain before it goes into the sprayer 3 - Add a flow agent, like Floetrol or Paint Easy (this is not a thinner) for latex paint – Penetrol for oil based 4 - Or you can thin, even as little as 5% can make a big difference, water for water based materials and mineral spirit for oil based material. Up to 20% is fine.