32 in. x 48 in. Metal Pegboard Standard Tool Storage Kit with White Pegboard and Black Peg Accessories

A:  Yes! However you will simply need to purchase additional mounting hardware. More on that below: Wall Control pegboard panels can be installed into concrete or on a concrete block wall although we do not provide mounting hardware for concrete installations. We recommend using hardware designed specifically for masonry applications such as Tapcon or Power Pro screws. We recommend either mounting the products directly using Power Pro masonry screws or blue Tapcon Screws you can find at any local hardware store or by attaching two (or three) horizontal rows of 2"x4"s along the wall where the top, bottom, (and middle if you wish) mounting holes are located on the panel. This is what we found works best because it requires you to drill less holes in your concrete wall and gives the panels a very even surface to mount to. So for instance, if you wanted to span a width of 4' you would use (1) 8' long 2"x4" and cut it in half and you would mount the first half horizontally at the height you want the top of the panels to be using about 4 concrete or masonry anchors. Then you would mount the second 2"x4" about 32" on center below the top 2"x4" so that it lined up with the bottom row of mounting holes in the panels, again using about 4 concrete or masonry anchors. You could also mount a third 2"x4" in-between these two because the panels actually have a center row of mounting holes but when mounting to concrete this third row may be overkill depending on your application. Once the 2"x4" are up you can simply attached each panel in a series along the 2"x4"s with the attachment screws provided with the panels. Through customer feedback we have found is that if you're only installing a couple of pegboard panels then the Power Pro screws or blue Tapcon screws for concrete you can pick-up at your local hardware store typically make the most sense but if you're installing a bunch of panels it is usually easier just to put up the 2"x4" or 2"x2"s first because that can save you some time when it comes to installing the individual panels.

A:  Thanks for the question John! Yes they can, however Home Depot does not carry the individual panels at this time.

A:  Thanks for the question! This product features a rust protectant powder coated finish to prevent rusting and also comes with a lifetime warranty for the original purchaser.

A:  Hi Jose and thanks for the question! Yes you can, however we do recommend 1/4" hooks as they do fit a little better. Also, if you do use 1/8" hooks (or even 1/4" hooks), we strongly recommend using them in conjunction with PegItz Peg Locks Rubber Grommets. The Pegitz brand makes a great rubber hook grommet that essentially locks round pegs into our panels very securely for both 1/8" and 1/4" round pegs.