No-Dig Permanent 4 ft. x 6 ft. Nantucket Vinyl Picket Fence Panel with Post and Anchor Kit

I had a problem with my pups digging up my garden every year. My wife gave me the go-ahead to put up a small fence to keep them out before I spend a lot of time and money on getting my garden going.I ordered the WamBam no-dig fence system from Home Depot online. It shipped relatively quick. Each package is very well packed and everything arrived in perfect condition.Unfortunaly, not all pieces were delivered the same day or the same time. I started with the fence posts and got them all hammered into the ground. I started with all of the no-dig posts, spacing them approx 72" apart. From there it was easy to measure and cut the inside pieces using a fine-tooth hack saw. Unfortunately, I needed to take a bit off because the mounting brackets hold the top and bottom supports out from the posts just enough so they won't fit per my measurement and hammering skills.Once the fence was installed I played around with the idea of using the no-dig system for my WamBam gates I had coming. I like to over-build EVERYTHING, so I didn't end up using their no-dig posts for mounting the gates. I instead cemented a treated 4x4 into the ground and slid a 4x4 vinyl post over the top.The gates are very well designed and easy to assemble. The frame comes reinforced with wood to make it a very durable choice for a gate. The hinges are spring-loaded/auto closing. I decided to make one auto close and one with no spring tension so I can use it without fighting the spring while moving wheelbarrows/lawnmowers through the gates. The hardware is very tough and sturdy. It will definitely last for years and years to come.I made a makeshift sleeve for the center post so it can be removed for wider loads to make it through the 2  48" gates. I cut a section of spare 4" vinyl and cemented it in place. Then I took the post and inserted a 4x4 all the way through downtrend post and down to the bottom of the sleeve. Screw it in place and viola! You now have a home-made gate post sleeve.All in all, I would highly recommend the WamBam no-dig fencing for anyone for smaller projects. Larger and taller projects, I'd recommend cementing each post the "old way" to ensure they don't move or have any play at all.My only recommendation to WamBam is to make the center posts a bit longer and the donuts bigger (tighter on the inside of the posts) to give it a bit more stability.The gates are amazing! For the cost, I'd add them to any fencing project.Tools needed: Tape Measure Electric Drill with Phillips Head 5lb Hammer 8-10lb Sledge Level Hacksaw with Fine Tooth Blade Rachet with 5/16 Socket Phone and portable speaker (for tunes while you work)

This fencing was easy to install a quality product, made well. I was surprised at how well it's made, and recommend it for your consideration. With the price of wood these days going vinyl makes total sense.

The fence was easy to install. Looks great and is sturdy. Easy to cut to make angles for diagonal pieces.

Over the weekend I constructed the corner accent fence panels. The boss wanted a scalloped look so we pre-setup a panel, stood it up and dropped a string from top of first picket to location we wanted for top of last picket. The string made a perfect arc. Marked the individual pickets, measured each for cut line and had the template for the panels. Installation with the dig-less posts was terrific. Purchased a post driver (20 lbs., $37.00) and driving went well. The boss loved the end product and is now scoping the back yard.

The Picket fence looks awesome and was so easy to install With our son's help we had 5 sections completed in 2 hours!!! We are actually doubling the length we originally planned because it looks so good. I'm excited about planning my flower bed that will be all along the fence

The overall appearance is very nice. Our installer mentioned the posts were much too short and additional support was required

Easy to install. I am not an expert either!

I only needed 24 ft. on one side of my house, and 16 ft. on the other side (with the 4 ft. gates) to meet my neighbor's existing fences. The purpose here was to keep my dogs from leaving the yard. To this end, I only needed a 4 ft. high fence. Not only is the WamBam Sturbridge Vinyl fence very attractive, but it fit the bill for easy installation. No holes to dig, and no concrete required. I purchased a "post-pounder" to sink the heavy duty galvanized posts about 34 inches into the ground. Each post took only about 3 or 4 minutes to install with the 27 lbs. "pounder". Installed onto the galvanized posts is a set of spaced cams that allow you to plum and level the 4x4 pvc cover sleeve. The rest is an easy assembly by following instructions provided. "Easy-Peasy" !

It was quite easy to assemble. I’m glad we didn’t have to dig holes etc. We purchased the wambam post pounder which made the installation much easier. The finished product seems to be sturdy and looks great.

Neither my husband nor I are very handy. But our fence needed replacing, and this looked like a good option for us. It was so easy, it looks amazing, and we bought it for a fraction of the cost of paying someone else to install a fence for us. I highly recommend this fence!