A: Thanks for reaching out, Lisa. For best adhesion, Watco Lacquer Wood Finish should be applied over bare wood. It can be applied over previously finished surfaces, lightly sand the surface with 220 grit sandpaper to create a profile for adhesion. Polyurethane cannot be applied over Watco Lacquer. - Rust-Oleum Product Support 6
A: Thank you for reaching out! For the best finish, we recommend applying Rust-Oleum Watco Lacquer Wood Finish with a good quality bristle brush or applicator. We do not recommend spraying this product due to how quickly it dries and because it would be prone to dry spray or bubbling. - Rust-Oleum Product Support 3
A: Yes. I used a hvlp gun with a regulator.
A: Yes, thinned about 10%, used a 1.5 tip and it came out perfect.
A: Thank you for reaching out! We recommend a moisture content no greater than 12% for our wood finishes, including our Watco Crystal Clear Lacquer. - Rust-Oleum Product Support 2
A: While you can use the Rust-Oleum Watco Lacquer Wood Finish, if you're looking for a spray, you may want to consider the Rust-Oleum Stops Rust Crystal Clear Enamel for your needs! As with any lacquer, a test application in an inconspicuous area should be considered for desired results. https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-12-oz-Protective-Enamel-Gloss-Crystal-Clear-Spray-Paint-7701830/100176222 - Rust-Oleum Product Support 1
|Name||11.25 oz. Clear Satin Lacquer Wood Finish Spray||1 qt. Clear Satin Lacquer Wood Finish||1 qt. Clear Gloss Lacquer Wood Finish||1 qt. Glaze Coat Clear Epoxy Kit|
|Container Size||11 Ounce||1 Quart||1 Quart||1 Quart|
|Paint/Stain Features||Dries Clear||Dries Clear||Dries Clear||Dries Clear|
|Paint/Stain Clean Up||Lacquer Thinner||Lacquer Thinner||Lacquer Thinner||Lacquer Thinner|
|Base Material||Oil Based||Oil Based||Oil Based||Oil Based|
|View Product||View Product||View Product||View Product|