Internet #305114196

Model #332398

Store SKU #1003236379

2 in. x 4 in. x 8 ft. Clear Pine KDAT Redwood-Tone Ground Contact Pressure-Treated Lumber

  • Pressure treated lumber for use in Ground Contact applications
  • Treated for protection against fungal decay, rot and termites
  • Perfect wood for a DIY project or a professional contractor
  • See More Details

Frequently Bought Together


Product Overview

Pressure treated deck at sunset to show stairs and an outdoor living space.

Add Value To Your Property

Studies show that adding a deck is one of the best ways you can increase your home's value.

Overhead looking view of a cedar-tone pressure treated deck to feature a chevron deck board print and complimenting bench, stairs, and railings.

Building Code Approved

Pressure-treated decking is building code approved for use in decking in above-ground or ground contact applications.

Close up of the deck boards showing how to properly clean your deck

Extend The Life Of Your Deck

Your maintenance efforts will give you a pressure-treated project that looks bright and fresh for years to come!

A sunny day of a man using a powerwasher to clean his deck boards

Preventative Maintenance Plan

1. Depending on the location of your outdoor project with regard to direct sun exposure, foliage coverage, etc., it may be sufficient to clean/brighten and recoat every two years. 2. If you decide to wait two or more years to perform your next cleaning/brightening, you may want to use a power washer. Be sure that the cleaner/brightener you use contains a mildewcide.

Close up of the a generic paint can on deck boards

Choosing The Right Stain Or Paint

When determining the right stain and paint for your deck, consider what color will best enhance the wood's finish.

A close up of water beaded up on a deck board

Paint or Stain Tips

If you desire to paint or stain the treated wood project, it is important that the wood be dry enough to accept a coating. The best way to determine if the wood is sufficiently dry to paint or stain is to sprinkle droplets of water onto the wood. If the water droplets are absorbed, the wood is ready to be painted or stained. If the water droplets bead on the surface of the wood, it is too wet. You should wait a few days before attempting to paint and stain the wood.

Close up of a non color additive pressure treated deck board

No Color Additive

Weathershield Pressure-Treated Lumber

Close up of a cedar-tone pressure treated deck board


Weathershield Pressure-Treated Redwood Tone Lumber

Close up of a redwood-tone pressure treated deck board


Weathershield Pressure-Treated Redwood Tone Lumber

Close up of a pressure-treated post with Deckorail solar and ball top post caps

Post Caps

Post caps add the finishing touch to your deck, porch, or fence project. What's more, they protect your post from nature's elements.

Close up of a pressure-treated double v and square edge posts

Deck Posts

Deck posts add a classic, decorative charm to your outdoor living space all while adding support to your deck, fence or porch.

Close up of a pressure-treated B2E baluster and square edge spindle

Balusters & Spindles

Treated balusters are used not only for safety and strength, but they also aid in creating a custom look to your railing project.

Pressure-Treated redwood-tone Pine meets the highest grading standards for strength and appearance. This pressure treated Ground Contact lumber can be used for applications where treated lumber is difficult to maintain, repair or replace. Treated lumber is critical to the performance and safety of an entire system or construction such as deck joists, beams and ledger boards. An additional benefit of treated lumber is its defense against rot and insect infestation for its vast majority of applications.Treated wood is typically still wet when it’s delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting.
  • California residents
  • Made of southern yellow pine
  • Ground contact treated lumber can be used in both above ground and ground contact exterior applications
  • Can be used for outdoor applications such as a component for a handrail system
  • Color-treated lumber allows the unique, natural beauty of the wood to remain visible
  • Kiln dried after treatment for added stability
  • Ideal for a variety of general uses including exposed structures, sill plates, decks, docks, ramps and other outdoor applications
  • Hot-dip galvanized fasteners are recommended
  • Note: product may vary by store
  • WeatherShield includes water repellant in the treatment process
  • No two pieces of lumber are the same.
  • Color, grain pattern and texture will vary as well.
  • Find everything you need to complete your decking project here

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Pressure Treated Lumber

2 in. x 4 in. x 8 ft. #2 DF Polymer Coated Western Red Cedar Tone Treated Lumber2 in. x 4 in. x 8 ft. #2 Polymer Coated Black Treated Lumber
current product
2 in. x 4 in. x 8 ft. Clear Pine KDAT Redwood-Tone Ground Contact Pressure-Treated Lumber
Brand WeatherShield
Name2 in. x 4 in. x 8 ft. #2 DF Polymer Coated Western Red Cedar Tone Treated Lumber2 in. x 4 in. x 8 ft. #2 Polymer Coated Black Treated Lumber2 in. x 4 in. x 8 ft. Clear Pine KDAT Redwood-Tone Ground Contact Pressure-Treated Lumber
Nominal Product Length (ft.)888
Nominal Product Thickness (in.)222
Nominal Product Width (in.)444
FeaturesPrefinished,UV Protected,Vinyl Coated,Water ResistantPrefinished,UV Protected,Vinyl Coated,Water ResistantPaintable,Pressure Treated
View ProductView ProductView Product



Actual Product Length (ft.)
Actual Product Thickness (in.)
Actual Product Width (in.)
Nominal Product Length (ft.)
Nominal Product Thickness (in.)
Nominal Product Width (in.)


Chemical retention (lb./cu. ft. )
Fastener recommendation
Hot Dipped Galvenized
Paintable,Pressure Treated
Lumber Grade
No. 1
Moisture content
Kiln Dried
Pressure treatment chemical
MCA - Micronized Copper Azole

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime

Questions & Answers


Is this suitable for indoor framing use in a basement as the bottom plate?

Asked by John October 3, 2019

John, Please check your local building codes to see if this would be suitable.

Can KDAT lumber be painted? Also, Will silicone caulk adhere to it?

Asked by dave July 22, 2018

We do not recommend painting this lumber. Pressure treated lumber would adhere the same as untreated wood as long as you allow the wood to dry out.

Customer Reviews

  • 2 Customer Reviews
  • 5 out of 5 stars overall
0% of customers recommended.
Overall Ratings
Sort By:
Very straight and no bow....
Very straight and no bow.
Was this helpful?
5 Star Review
Rating provided by a verified purchaser
Was this helpful?
Review this Product
Share your thoughts with other customers