#1 Home Improvement Retailer

Internet #100658844

Model #PK70-1

Store SKU #740106

LevelLok Ladder Leveler with Base Units

$21600
Apply Now
Pay $191.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Levels the ladder on uneven surfaces
  • Swivel shoe with ice pick on both ends
  • Adjusts up to 8-1/2 in.
Store
0 in stock
Text to Me
caret

Product Details

Werner's Quick-Click Ladder Leg Leveler is designed with base units that stay attached to the ladder, and the leveler can be easily removed when not in use. Made for leveling a ladder on uneven surfaces, it can be used on either side of the ladder and features a swivel shoe with ice picks on both ends. The leveler can adjust up to 8-1/2 in. and comes complete with mounting hardware and instructions for easy setup.
  • Levels extension ladders safely
  • For use on Werner MT series, D7100, D6200, 7100, D1300, D1500 and 7800 extension ladders
  • Swivel shoe with ice pick at both ends for stability
  • Can be removed easily when not in use
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

110Questions
caret
Q:Will this work with all MT series ladders? Specifically the MT 26? ladder?
by|Nov 26, 2022
5 Answers
Answer This Question

A:  No it will not work with your ladder 

by|Nov 29, 2022

    A:  PK70-1 will fit the MT-26 ladder.

    by|Nov 28, 2022

      A:  This leveling retrofit was designed to fit on Warner ladders but I installed it successfully on an aftermarket ladder. I would not suggest doing this for safety reasons unless you feel confident as a” do it yourself” engineer 

      by|Dec 2, 2022

        A:  The PK70-1 will fit the MT 26 ladder.

        by|Nov 29, 2022

        A:  PK70-1 will fit the MT-26 ladder.

        by|Nov 28, 2022
          caret
          Q:What length increments do these adjust? 3/8", 1/2", 1"?
          by|Sep 8, 2022
          5 Answers
          Answer This Question

          A:  Model PK70-1 adjusts in increments of 3/16", up to 8 1/2".

          by|Sep 9, 2022

            A:  You pull them straight up or down, there are no increments. They work very well.

            by|Sep 14, 2022

              A:  Model PK70-1 adjusts in 3/16" increments, up to 8 1-2".

              by|Sep 9, 2022

                A:  You should check with manufacturer, but the adjustment works a continuous function rather than a specific step function as your question suggests.

                by|Sep 12, 2022

                  A:  The increments are in 1/2" adjustments.

                  by|Sep 11, 2022
                    caret
                    Q:Will this leveler work on Werner D6228-2
                    by|Jul 22, 2022
                    4 Answers
                    Answer This Question

                    A:  PK70-1 will work with the D6228-2 ladder.

                    by|Jul 25, 2022

                      A:  I believe the Werner website confirms this leveler will work on all 6200 series ladders (8' - 40'). Good luck!

                      by|Jul 27, 2022

                        A:  Model PK70-1 will work with the D6228-2.

                        by|Jul 25, 2022

                          A:  Yes

                          by|Nov 3, 2022
                            caret
                            Q:Will these work on a All American ladder
                            by|Jun 13, 2022
                            5 Answers
                            Answer This Question

                            A:  Model PK70-1, will work on Werner ladders only. It will not work on a All American ladder.

                            by|Jun 17, 2022

                              A:  Yes

                              by|Jun 14, 2022

                                A:  Yes

                                by|Jun 14, 2022

                                  A:  Werner ladders only. Mike

                                  by|Jun 13, 2022

                                  A:  Model PK70-1, will work on Werner ladders only. It will not work on a All American ladder.

                                  by|Jun 16, 2022
                                    Showing 1-4 of 110
                                    caret

                                    Customer Reviews

                                    4.5 out of 5
                                    (394)
                                    • 4.5
                                      out of 394 reviews
                                    • 90%recommend this product
                                    Filter by:
                                    Showing 1-10 of 394 reviews
                                    This product was very easy to use and attach to my ladder
                                    This product was very easy to use and attach to my ladder
                                    by
                                    • Verified Purchase
                                    • Recommended
                                    1 found this review helpful
                                    Installation was easier than I expected and once done worked better than expected.
                                    Installation was easier than I expected and once done worked better than expected.
                                    by
                                    • Verified Purchase
                                    • Recommended
                                    Ladder safety is important and this is a well made easy to operate product that stabilizes the l...
                                    Ladder safety is important and this is a well made easy to operate product that stabilizes the ladder on unlabeled ground
                                    by
                                    • Verified Purchase
                                    • Recommended
                                    Purchased for use on a Werner MT-22 multi-ladder. Had to drill holes through the side ladder ra...
                                    Purchased for use on a Werner MT-22 multi-ladder. Had to drill holes through the side ladder rails to install the two mounting rails (per Werner instructions). Caught me slightly by surprise when they specified drilling those holes with an 11/32" drill bit (I didn't have that size). I drilled them with a 5/16" drill bit then ground them out a bit w/ a rotary tool and all was good. End result was an adjustable leg that I can adjust up/down using a foot on that side of the ladder while I manipulate the ladder with both hands... yielding a very stable ladder footing. Happy.
                                    by
                                      • Recommended
                                      5 found this review helpful
                                      Outstanding add-on; great for bi-level property
                                      Today I purchased the 32' Werner aluminum extension ladder D1300 series, along with these leg levelers. It took me about 20-25 minutes to install the brackets onto the ladder (you need a drill, metal drill bit size 11/32", tape measure, 1/2" socket, ratchet, marker, a center punch, 0-40ft/lb. torque wrench (optional) and some basic shop/mechanic know-how). Sequence of install is measure, mark, check measurements on marks, line up braces, if good to go...center punch middle of marks, then begin to drill, once holes are drilled glue (provided) spacers to braces and line up...then insert bolt, washers and lock nut and tighten. once hand tightened instructions recommend a 9 ft/lb. tighten. Please pay attention to what type of ladder you have so as to match the application of this item to your respective ladder. It works on four different type of ladders...rung and plate, direct swage with bracing, direct swage w/o bracing "which is the D1300 model", and the telescoping multi-ladder. Applicability to your ladder can be found in the product description area. After installing the braces, the fastening of the leg leveler is cakewalk. It literally takes 5 seconds to attach and extend and just as much time to take off. It is very sturdy. I extended my ladder to 25 feet on uneven ground and climbed to the top...no wobbling, shifting or any kind of weakness or instability indicated. Sturdy construction with heavy duty metal spring and metal geared teeth. Also has locking pin for added safety after the press lock engages. The step down lever makes it that much more easy to use... don't have to bend over to extend leg, just flip lever outward and step on it to extend leg...that easy! And to retract leg all you have to do is tap the top lever and it will retract. Simplistic and solid. A little pricey but definitely well worth it. Extends to about 8.5" more as advertised. Pictures attached show about a 4" high step.
                                      by
                                      • DIY
                                      • Recommended
                                      17 found this review helpful
                                      by
                                      • Verified Purchase
                                      A little pricey but saves time and is much safer...
                                      A little pricey but saves time and is much safer than blocking. Good quality and easy install.
                                      by
                                      • Verified Purchase
                                      LevelLock Does Not Work As The Instructions Say It Will
                                      It is installed precisely as the directions show. Holes were drilled as per the instructions and measured 3 times before drilling. Without the LevelLok extended the ladder will not sit perfectly vertical to work off of. I have to remove the LevelLok when I don't need it.
                                      by
                                      • Verified Purchase
                                      Easy to install, works great...
                                      Easy to install, works great
                                      by
                                      • Verified Purchase
                                      Very Poor Instructions
                                      This product has no instructions other than a few photos on the packages exterior. No explanation of which spacers or washers go where.
                                      by
                                        • Recommended
                                        Showing 1-10 of 394 reviews

                                        Frequently Bought Together

                                        +
                                        +
                                        Price:
                                        $21600