4 ft. x 8 ft. Laminate Sheet in Calcutta Marble with Premium Textured Gloss Finish

There is a specific procedure for applying laminate edge banding to a rounded countertop edge. It typically involves using a belt sander to thin the edge band strip at the location where it will wrap around the corner. Sand the back of tree edge strip, but do not sand all the way through the brown substrate. You're just trying to made the laminate a little thinner so its more plyable. When gluing up, use a clamp to hold in place until the contract cement has grabbed sufficiently. The end of the strip must be a good distance from the radius so it doesn't pop off.

This is one full sheet, 48" x 96". You could easily cut this out for a sink. We used sheets for our counter tops. This material cuts with a utility knife.

I suppose it is possible, but probably not reccomended. Old laminate comes off fairly "easy" with the right tools. We had old purple laminate so I feel your pain. Or you could try some laminate paint. It looks like granite or marble. However you need to make sure you always use a thick cutting board if you paint your countertops.

Do u mean you are putting new laminate over existing laminate? If that is the case it works fine. You do have to prep the old laminate first and should be in good shape. We did it in our bathroom as well in our kitchen and I love it!

This will not bend around the edges without breaking. Luckily, Wilsonart solves this issue with their matching edge profiles available in several different varieties. Here is an example: Calcutta Marble Laminate Custom Crescent Edge https://www.homedepot.com/p/302567132

yes

I cut strips of the laminate material on my table saw. Cut them wider than necessary. Glue the edges onto the substrate, then trim it with a laminate router. If you don't have a laminate router, you can use a metal file, then sandpaper to trim the edges flush with the top. It is not very difficult, however, you need to take your time. Measure twice, cut once!

mine came flat

Yes I did. You sand it until all of the shine is gone and it is scratched up very well.

Standard Wilsonart Laminate thickness is 0.039". For more product information, please call the Wilsonart Hotline at 1-800-433-3222 and one of our Customer Service Representatives will be happy to assist you. Thank you for your inquiry, Customer Service Wilsonart Engineered Surfaces