Internet #100273810

Model #M123R

Store SKU #317027

Straight-Cut Aviation Snip (3-Pack)

  • Cuts up to 8 miles of 18-guage low carbon steel
  • Serrated blades spread cutting force, saving time and energy
  • Manufacturer's limited lifetime warranty
  • See More Details

Frequently Bought Together

+
+
Price:
$3497

Product Overview

Crescent Wiss® Logo

Crescent Wiss®

In 1847, Jacob Wiss opened a small shop in New Jersey forging surgical instruments and shears that paved the way for today’s premium line of scissors, snips and specialty trade tools.

Crescent Wiss® Snips

A Long Legacy

In the 1940's, our aviation snips were a key tool for cutting aircraft sheet metal during WWII and became best sellers after the war ended.

Crescent Wiss® Next Generation Snips

Crescent Wiss® Next Generation Snips

Our next generation snips stay true to form with new ergonomic features.

Crescent Wiss® snips cuts up to 8 miles of steel

Cuts 8 Miles of Steel

The shape consistency and proprietary serration process of our snips produce blades that cut up to 8 miles of steel.

Longer cut life than our previous snips

Long Tool Life

Our precision cast blades, along with an improved pivot design, provides a longer cut life allowing you to get more work done.

Improved Pivot Design

Incredible Durability

Our improved pivot bolt design features built-in stops for consistent jaw opening and upgraded spring action for a fast, effortless feed.

Lifetime Warranty

Lifetime Warranty

Crescent Wiss® offers a limited lifetime warranty on our products to be free of defect in material and workmanship.

Crescent Wiss® M1R

Crescent Wiss® M1R

Cuts left from tight curves to straight with red handles for quick identification.

Crescent Wiss® M2R

Crescent Wiss® M2R

Cuts right from tight curves to straight with green handles for quick identification.

Crescent Wiss® M3R

Crescent Wiss® M3R

Cuts straight and slight curves with yellow handles for quick identification.

Crescent Wiss® M1RS1 and M2RS1

Crescent Wiss® Special Series Snips

Ideal for cutting inconel, titanium, and 18 gauge stainless steel. Available in left/straight or right/straight.

Crescent Wiss® M6R, M7R, and M8OS

Crescent Wiss® Offset Snips

Offset blades keep hands clear of cut material. Available in left/straight, right/straight, and straight.

Crescent Wiss® M5R and M45RS

Crescent Wiss® Specialty Snips

M5R Bulldog snips for notching and trimming heavy stock. M45RS Molding Miter snips for cutting all types of small molding in PVC, MDF, and pine.

Crescent Wiss® has been producing the world’s best Snips & metal-cutting tools for over 100 years. Crescent Wiss® has taken the world’s best Aviation Snip and made it even better. The Next Generation Aviation Snips feature a multitude of precision-engineered performance enhancements that take these Snips’ performance to the next level while still maintaining the look & feel of the Aviation Snips that gained the trust of tradesmen world-wide over the last 100 years. The all-new Next Generation Aviation Snips successfully completed over 500,000 cuts on 18ga CRS, which equates to over 8 miles of steel cut without failure.
  • Precision-Cast Blades feature durable serrations that spread cutting force across jaw improving cut quality & tool life
  • High-Speed vibratory finish provides excellent corrosion resistance and high-end aesthetic
  • Upgraded spring-action for fast, effortless feed up to four times longer
  • Upgraded handle design features built in stops that provide consistent jaw opening and easy operation
  • Ergonomic latch for fast, single handed operation with either hand
  • Integrated handle ring for hanging and easy storage
  • Ergonomic non-slip grips provide excellent control and easy cleaning



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Snips

9-1/4 in. Straight-Cut Offset Aviation Snip
current product
Straight-Cut Aviation Snip (3-Pack)
Left and Right Offset Aviation Snips (2-Pack)1.5 in. Left-Cut Offset Aviation Snip
BrandWissWissMilwaukeeBESSEY
Name9-1/4 in. Straight-Cut Offset Aviation SnipStraight-Cut Aviation Snip (3-Pack)Left and Right Offset Aviation Snips (2-Pack)1.5 in. Left-Cut Offset Aviation Snip
Price
$1597
$3497
$3497
$3498
Ratings
(139)
(913)
(105)
(3)
Snip TypeOffset Aviation SnipAviation SnipOffset Aviation SnipOffset Aviation Snip
Rolled Steel Gauge Cutting Capacity18182218
Individual/SetIndividualSetSetIndividual
Blade Length (in.)1.5 1.312
Handle MaterialRubberComfort GripPlasticComfort Grip
Blade MaterialSteelSteelSteelSteel
View ProductView ProductView ProductView Product

Specifications

Details

Blade Material
Steel
Features
No Additional Features
Hand Tool Type
Snips/Sidecutters
Handle Material
Comfort Grip
Individual/Set
Set
Number of Pieces
3
Returnable
180-Day
Rolled Steel Gauge Cutting Capacity
18
Snip Type
Aviation Snip
Tools Product Type
Hand Tool

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime

Questions & Answers

32Questions54Answers

can i cut thin tile with this? i saw a video of a man cutting a circle on a tile with a scisor similar to this one. T

Asked by Emma June 9, 2020
3
Answers

No. I don't think so. First of all these scissors are designed to cut thin metal. These do open big enough to grab anything over 1/4". Also tiles edges might chip off.

Can this cut metal-clad cable (the metal shield)?

Asked by igorjrr May 16, 2020
5
Answers

It can cut coax cable, but I have not tried to use it on metal clad cable. It can cut through sheet metal, if that helps.

I think people who answered misunderstood (my fault). I'm not cutting a circle in the duct. I'm c...

Asked by BC January 17, 2020
5
Answers

Straight I will work fine

I'm going to cut into an old 7" round metal vent pipe, and I want the cut line to be as close to ...

Asked by BC January 16, 2020
5
Answers

Straight will work fine. But if you’re concerned about it being perfect I’d recommend using a dremel or multi-tool or even a hack saw. Also, if it’s something like ducting that you’re cutting then that stuff is easy to manipulate back in shape even if you mess it up.

Why does it happen you changed the length of the snips? Question is for crescent

Asked by Double December 27, 2019
3
Answers

The longer the handle, the better leverage you will have. Size difference is mostly from the manufacturer and a cost driven choice.

the spring under warranty?

Asked by Frankie November 12, 2019
5
Answers

I called Wiss seeking replacement under their “Lifetime Limited Warranty”... Be prepared to hear that your issue falls into the “normal wear and tear” category and as such; you have no claim... That’d be your “Limited” warranty. Never got a satisfactory explanation on how the “Lifetime” part figures in. But you can count on that “Limited” language to render any “Lifetime” component irrelevant every time!

Can this cut through metal mess easily? I believe it does but I just need confirmation. Got meta...

Asked by tingy August 26, 2019
10
Answers

It most likely can. You would be better off with a small die grinder. It will give you smoother edges and less cleanup.

Will these cut galvanized wire mesh?

Asked by Bee July 29, 2019
5
Answers

Yes it will

Can these cut 28 gauge sheet metal?

Asked by LittleGus June 1, 2019
9
Answers

Yes it will

Would these be good tools for cutting curves in 4mm Coroplast?

Asked by KHedges March 28, 2019
4
Answers

Since you don’t mention what material your cutting this is hard to answer. The ships have a rather short cut stroke that is probably good for curves. I was cutting thin metal flashing so would hesitate saying anything else not knowing your material.

Straight-Cut Aviation Snip (3-Pack) - page 2

Customer Reviews

  • 913 Customer Reviews
  • 4.6 out of 5 stars overall
92% of customers recommended.
Overall Ratings
5star-icon(657)
4star-icon(181)
3star-icon(28)
2star-icon(16)
1star-icon(31)
Sort By:
Good all around snip for small jobs like duct work...
Good all around snip for small jobs like duct work
Was this helpful?
1
0
cutting blade snapped after the second cut
I have an old pair of WISS snips that I’ve had for years and they worked great, they were getting a little doll so I decided to buy a new pair unfortunately the new ones are garbage. I was cutting some 20 gauge galvanized sheet metal and after making two cuts the cutting blade snapped broke right off.
Was this helpful?
5
0
Unfortunately, it did not do the job I bought it to do. But, it was useful on another project and...
Unfortunately, it did not do the job I bought it to do. But, it was useful on another project and easy to use. Good for rewiring, but not for thicker wire that I wanted to cut.
Was this helpful?
3
0
The snips is very accurate and easy to handle.I used...
The snips is very accurate and easy to handle.I used it to cut the AC ducts and it was quick and easy.
Was this helpful?
0
0
My students use these for the steel stud framing portion of the curriculum. They are sharp and la...
My students use these for the steel stud framing portion of the curriculum. They are sharp and last a long time.
Was this helpful?
5
0
I purchased this product to cut a kitchen backsplash I purchased that was made of super thin ston...
I purchased this product to cut a kitchen backsplash I purchased that was made of super thin stone. The snips worked great. They cut the stone easily, with precision and with a clean cut on the edges of the stone. Very impressed!
Was this helpful?
2
0
Always been a good product
Always been a good product
Was this helpful?
9
0
Always and forever
Always and forever
Was this helpful?
1
0
My dad had a pair of tin snips growing up and thats where i learned to use them , i have bout a p...
My dad had a pair of tin snips growing up and thats where i learned to use them , i have bout a pair online for the price abd they didnt cut nearly a smooth as these do it was amazing the differnce, spend a little more get a better product.
Was this helpful?
9
0
The snips cut very well, and the handle provides a good amount of both control and comfort. I wa...
The snips cut very well, and the handle provides a good amount of both control and comfort. I was drawn to this set of snips because they are made in the USA, and the quality is evident. I wish more tools were made in the USA.
Was this helpful?
7
0
Review this Product
Share your thoughts with other customers