#1 Home Improvement Retailer

Internet # 304294138

Model # 0HR2230090

Store SKU # 1003186270

Store SO SKU # 1003250269

9 in. x 1-1/4 in. Pro Super/Fab High-Density Knit Fabric Roller Cover Applicator/Tool

$616
Store
0 in stock
caret

Product Details

Wooster Pro Super/Fab Roller Cover provides great paint capacity while also offering better resistance to matting. The unique fabric blend provides a smooth finish compared to other knit rollers. For high-production results with all flat, eggshell and satin paints, stains and waterproofing.
  • High-density knit fabric
  • Use on stucco, plaster, brick and block
  • 1-1/4 in. nap for extra-rough surfaces
  • Flat, eggshell and satin paints, stains and waterproofing
  • Double-thick polypropylene core resists water, solvents and cracking
  • Return Policy
caret

Specifications

caret

Questions & Answers

13Questions
caret
Q:I?m looking for a roller that will give me an ?orange peel? texture for interior flat paint Thanks
by|Jul 20, 2023
1 Answer
Answer This Question

A:  The Super/Fab roller cover is known to be a great production roller cover that will pick up and release a large volume of paint while providing a smooth texture. In general, an orange peel texture is not desired. If this is desired on a smoother surface, a larger nap like 3/4in or above loaded heavily with paint could provide a more textured or orange peel look. Please do not hesitate to contact Wooster Customer Service at 800-392-7246. We would be happy to help you find the perfect applicator for your desired results.

by|Jul 21, 2023
    caret
    Q:What size nap would you use on the roosters to apply rubber coated paint on a mobile home roof
    by|Jul 15, 2023
    1 Answer
    Answer This Question

    A:  We would suggest a 3/8" or 1/2" roller cover to apply rubber coated paint on a mobile home roof. Wooster customer Service is always available to help at 800-392-7246.

    by|Jul 18, 2023
      caret
      Q:Does this work well for Silicone Roof Coating or is there another roller recommended?
      by|Jun 26, 2023
      1 Answer
      Answer This Question

      A:  We always recommend checking your coating for the best recommended applicator. The Super/Fab 1-1/4 could be used for a silicone roof coating, but we might recommend a smaller nap like a 1/2". The 1-1/4 will pick up and release a very large volume, and could possibly apply too much. We might suggest the Wooster Pro Surpass 1/2" (see internet #303336913). Wooster Customer Service is also always available to help at 800-392-7246.

      by|Jun 27, 2023
        caret
        Q:Does this roller work with drylok paint?
        by|May 15, 2023
        2 Answers
        Answer This Question

        A:  I do not know, I used Behr masonry and stucco paint and it was awesome, you might want to contact the manufacturer of the paint and request an answer from them, it might benefit you better.

        by|May 16, 2023

          A:  The roller works very well with drylok paint. I was impressed.

          by|May 17, 2023
            Showing 1-4 of 13
            caret

            Customer Reviews

            4.6 out of 5
            (956)
            • 4.6
              out of 956 reviews
            • 95% recommend this product
            Filter by:
            Showing 1-10 of 956 reviews
            Wooster roller
            Easy to used, great to paint ceilings with flat paint
            by
            • Verified Purchase
            • Recommended
            I got the Wooster 18" roller to stain my deck. It took me a while to actually get to it as I had...
            I got the Wooster 18" roller to stain my deck. It took me a while to actually get to it as I had a 'bucket list' of projects. But once I started, this roller whipped through the job in no time! Because of its thick 1-1/4" nap, it held a ton of stain, which made reloading the roller easier. Plus, the thicker nap allowed the stain to penetrate into the little cracks and between the seams easier. And the 18" width meant that I only had to make a few passes! The only drawback is that the end caps didn't fit my 18" roller frame. Good thing I had an old roller. Just popped off the end caps of both and replaced the smaller opening ones with the bigger opening ones.
            by
            • Recommended
            6 found this review helpful
            I’m still using it to paint the stucco on my...
            I’m still using it to paint the stucco on my house! Really great for stucco!
            by
            • Verified Purchase
            6 found this review helpful
            This is a HUGE roller! The good news is that it soaks up a lot of paint and you're able to paint ...
            This is a HUGE roller! The good news is that it soaks up a lot of paint and you're able to paint LARGE sections in a short amount of time. This would be great for young professional painters, but not so much for old DIY people like myself. Once it is full of paint it is slightly heavy to lift and roll. But it does roll smoothly and is great for coverage, it doesn't drip very much. We have a stucco type of house, and it did a great job of getting into all the little nooks and crannies. So really good coverage of paint on the walls. The bad news is that when it is full of paint is that it wastes a lot too, via the minor spray off (not too bad, but I did have freckled arms afterwards), paint left over in roller pan and when you go to clean it. It took me awhile and a lot of water to get it cleaned. But if you're young and have the stamina, you could probably paint a whole house in a few hours, well at least the bulk of it, not including detail work. I used it to paint a quarter of our house in a fraction of the time of the other walls. I imagine that if you could keep going then it wouldn't be too bad with wasted paint, just keep filling and painting. But if you have to stop and rest a lot like myself, and have to clean it in between each uses, then that would be what I mean about wasted paint. (Just to clarify it)
            by
            • Recommended
            3 found this review helpful
            The roller is made a little better than most. The nap is very good and doesn't shed. The roller i...
            The roller is made a little better than most. The nap is very good and doesn't shed. The roller itself is structurally stronger than smaller rollers with the ends capped for strength. If I had to do large jobs often, I'd give it a better review, but because of the extra width, it's harder to carefully get into areas near trim and ceilings. It's pretty heavy loaded up for ceiling work.
            by
            1 found this review helpful
            3/4 nap. Did the job....
            3/4 nap. Did the job.
            by
            • Verified Purchase
            6 found this review helpful
            The WOOSTER 18 IN. X 1-1/4 IN. SUPER/FAB roller cover will be the perfect roller cover for my par...
            The WOOSTER 18 IN. X 1-1/4 IN. SUPER/FAB roller cover will be the perfect roller cover for my parents old Tudor style home the finish is wavy and jagged. Wooster is the only brand roller covers I buy I've used their 3/4 inch. the last time I painted their home they never shed, even rolling over the Sharpe edges . I 'm looking forward to see how many passes it will take to cover the homes rough finish I bet (1) !
            by
            • Recommended
            I'm in the process of renovating my living room and used this paint roller to paint the walls. I...
            I'm in the process of renovating my living room and used this paint roller to paint the walls. It has a very thick 1-1/4" nap on it which worked very well and made a nice, smooth finish. They're plaster walls in a house built in 1874 so they're a bit wavy and bumpy. What I really liked about this roller is because it's thicker, it made it a lot easier to get in all the little valleys on the wall without having to press too hard. It also holds a lot of paint so you don't have to put paint on it as much as shorter nap rollers.I think it would be great for textured ceilings as well. I like 18" rollers in general because they save so much time being so wide. I use Wooster brand rollers all the time because of their good quality and excellent results. This roller is no exception.
            by
            • Recommended
            7 found this review helpful
            This was my first time using a roller with a nap this long. I like the fact that this roller hold...
            This was my first time using a roller with a nap this long. I like the fact that this roller holds a ton of paint. I used it to apply a thick latex primer to an interior brick wall and fireplace. The nap was long enough for me to get pretty good coverage in my mortar joints. This roller cover is super fluffy. And the fact that the brush holds so much paint made it very easy to get paint on the wall and then work the paint into the joints with a stiff bristle brush. This is a really nice roller for heavily textured surfaces. I have no doubt that this roller would be awesome for painting cinder block. This is a great value for a roller of this quality.
            by
              • Recommended
              6 found this review helpful
              It's a reliable product that got my interior paint job done on rough textured surfaces. I have a ...
              It's a reliable product that got my interior paint job done on rough textured surfaces. I have a house that's 1,500+ SQ. ft... This roller brush works great and is durable.
              by
              • Verified Purchase
              • Recommended
              7 found this review helpful
              Showing 1-10 of 956 reviews

              Compare Similar Paint Roller Covers

              current product
              9 in. x 1-1/4 in. Pro Super/Fab High-Density Knit Fabric Roller Cover Applicator/Tool
              9 in. x 3/4 in. 50/50 Lambswool/Polyester Knit Roller Cover9 in. x 1 in. 50/50 Lambswool/Polyester Knit Roller Cover9 in. x 1 in. Polyamide Yarn High-Density Cirrus Pro X Woven Roller Cover
              BrandWoosterWoosterWoosterWooster
              Name9 in. x 1-1/4 in. Pro Super/Fab High-Density Knit Fabric Roller Cover Applicator/Tool9 in. x 3/4 in. 50/50 Lambswool/Polyester Knit Roller Cover9 in. x 1 in. 50/50 Lambswool/Polyester Knit Roller Cover9 in. x 1 in. Polyamide Yarn High-Density Cirrus Pro X Woven Roller Cover
              Price
              $617
              $792
              $892
              $1106
              Ratings
              (956)
              (1)
              (1)
              (0)
              Wall TypesRough/extra-roughSemi-rough/roughRoughRough/extra-rough
              Product Length (in.)9.0 in9.0 in9.0 in9.00 in
              Nap Size/Thickness (in.)1.25.7511
              Package Quantity1111
              Roller Core SizeStandardStandardStandardStandard
              For Use OnCeiling, Concrete, Deck, Metal, Stucco, Wall, WoodCeiling, Concrete, Deck, Metal, Stucco, Wall, WoodCeiling, Concrete, Deck, Metal, Stucco, Wall, WoodCeiling, Glass, Metal, Wall, Wallpaper, Wood
              For Use WithAll Paint TypesAll Paint TypesAll Paint TypesAll Paint Types
              Roller Cover MaterialFabricFabricFabricFabric
              Roller Length (in.)9 in9 in9 in9 in
              THD SO SKU1003250269
              View ProductView ProductView ProductView Product