#1 Home Improvement Retailer

Cart

Home
Lumber & Composites
Fencing
Fence Hardware

Internet # 100322532

Model # 328913DPT

Store SKU # 181697

1-3/8 in Dia x 10 ft. 6 in. 17-Gauge Galvanized Steel Chain Link Fence Top Rail Post

(532)Questions & Answers (56)
$1377
  • Provides horizontal framework for chain-link fabric
  • High-grade galvanized steel for enhanced durability
  • Attaches to terminal posts with rail ends and brace bands
  • View More Details
Store
0 in stock
caret

Product Details

Our YARDGARD 1-3/8 in x 10 ft. 6 in. 17-gauge galvanized top rail is part of the fence framework and helps support the chain link fabric horizontally. These posts are used at the top of a chain link fence to allow the chain link fabric to attach. Made from galvanized steel, this top rail connects to terminal posts with rail ends and brace bands.
  • To calculate how much materials you would need for your fencing project, type in yard-gard.com/fencecalculator in a new browser to get an estimate
  • Galvanized for longevity
  • Provides horizontal framework support to which the top of the chain link fabric attaches
  • 17-Gauge wire
  • 10 ft. 6 in. in length with one end smaller to fit into the larger end of the next top rail piece
  • Easy installation
  • Connects to terminal posts with rail ends and brace bands (not included)
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

56Questions
caret
Q:What is the True OD size ? My top rail on my fence is like 1 1/4 OD
by|Dec 11, 2021
1 Answer
Answer This Question

A:  Hello, it's approximately 1 5/16".

by|Dec 15, 2021
    caret
    Q:Cn this be bent with a conduit bender?
    by|Oct 31, 2021
    1 Answer
    Answer This Question

    A:  Hello, you may need a slightly larger conduit bender as the top rail has a diameter of 1-3/8 in. There are also pre-assembled kennels available if at Home Depot if you are looking for a faster alternative.

    by|Nov 1, 2021
      caret
      Q:Could you use an 1 1/4" emt bender to bend the top rail?
      by|May 31, 2021
      1 Answer
      Answer This Question

      A:  As long as you can get it into the bender it'll work. They're probably lose so try it. Take your time

      by|May 31, 2021
      caret
      Q:Can I special order longer length of rail? If so, what are the standard sizes? If you do not have...
      by|May 19, 2021
      2 Answers
      Answer This Question

      A:  The rails have a tapered end so they slide into the next section. You can see the taper at the top of the rail.

      by|May 20, 2021

        A:  LolaK, the standard length for the top rail in stock at HD is 10 foot 6 inch. There are no other sizes offered. The connecting sleeve is 6 inches and the SKU for HD is 385409.

        by|May 20, 2021
        Showing 1-4 of 56
        caret

        Customer Reviews

        4.7 out of 5
        (532)
        • 4.7
          out of 532 reviews
        • 96% recommend this product
        Filter by:
        Showing 1-10 of 532 reviews
        Dec 19, 2020
        Purchased it to use as a poll to mount a cell phone booster antenna. Worked Great.
        Purchased it to use as a poll to mount a cell phone booster antenna. Worked Great.
        by
        • Verified Purchase
        • Recommended
        3 found this review helpful
        Mar 31, 2020
        Work as advertised. Easy to remove old bent one and...
        Work as advertised. Easy to remove old bent one and install new one in 20 minutes
        by
        • Verified Purchase
        Jul 25, 2019
        I install home TV antenna systems and use it for antenna mast. The swedge end is perfect to put t...
        I install home TV antenna systems and use it for antenna mast. The swedge end is perfect to put two pieces together and if I need a five footer I just cut one in half. Next time I need another it's ready and I put it on the bottom and use a self tapping screw to to secure the two together. Plus they are less cost the actual mast pipe so my profit margin is greater or I can pass the savings on to the customer.
        by
          • Recommended
          6 found this review helpful
          Jul 9, 2019
          Rebuilding missing fence pieces was no challenge. The parts fit and does blend into older fence.
          Rebuilding missing fence pieces was no challenge. The parts fit and does blend into older fence.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          May 8, 2018
          Needed a replacement for 10’ 16 ga antenna mast, this worked fine
          Needed a replacement for 10’ 16 ga antenna mast, this worked fine
          by
          • Verified Purchase
          • Recommended
          8 found this review helpful
          Jan 30, 2018
          Did the job to fix my fence....
          Did the job to fix my fence.
          by
          • Verified Purchase
          Oct 10, 2017
          Used as tv antenna pole drill hole no problem. This pole bends a littlrin windy conditions which ...
          Used as tv antenna pole drill hole no problem. This pole bends a littlrin windy conditions which may have affect on signal. A brace can help stableze movement.
          by
          • Verified Purchase
          • Recommended
          4 found this review helpful
          Oct 10, 2017
          The 1-3/8 top rail tubing was just what I needed to complete bracing on my hoop house. I used th...
          The 1-3/8 top rail tubing was just what I needed to complete bracing on my hoop house. I used the ten and half foot sections together to make twenty one feet and did cross bracing between the twenty eight feet wide bows. This strengthen the 15 feet high center arches and still allow me access with my large tractor inside the 3000 sq ft structure. They were easily connected with Tek screws. I purchased more than thirty sections and plan to build more structures exclusively with these top rails.
          by
          • Verified Purchase
          • Recommended
          14 found this review helpful
          Apr 11, 2017
          Worked great for making a railing at my lake House
          Worked great for making a railing at my lake House
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          Aug 9, 2016
          Hand Rail and beyond
          I used this rail for a hand rail on a 5 step set I built for my sons' patio area. I had purchased the wood the day before, cut and assembled the steps. Finding there are no preset stair hand rails, I used this Galvanized Top rail along with Galvanized bolts to hold it in place. The whole rail was then bolted into the wooden step frame along and under the bottom.
          by
          • DIY
          • Verified Purchase
          • Recommended
          3 found this review helpful
          Showing 1-10 of 532 reviews

          Compare Similar Fence Hardware

          1 in. Black Aluminum Fence Puppy Guard Non-Drilled Add-On Bottom Strip
          current product
          1-3/8 in Dia x 10 ft. 6 in. 17-Gauge Galvanized Steel Chain Link Fence Top Rail Post          		2-3/8 in. Galvanized Chain-Link Post Anchor (4-Pack)Chain Link Fence 170 ft. 9-Gauge Galvanized Steel Tension Wire
          BrandMainstreet Aluminum FenceYARDGARDallFENZEverbilt
          Name1 in. Black Aluminum Fence Puppy Guard Non-Drilled Add-On Bottom Strip1-3/8 in Dia x 10 ft. 6 in. 17-Gauge Galvanized Steel Chain Link Fence Top Rail Post2-3/8 in. Galvanized Chain-Link Post Anchor (4-Pack)Chain Link Fence 170 ft. 9-Gauge Galvanized Steel Tension Wire
          Price
          $1534
          $2198
          $3422
          /box
          $4300
          Ratings
          (29)
          (532)
          (0)
          (31)
          Fencing Material CompatibilityMetalChain LinkChain LinkChain Link
          Accessory TypeOtherChain Link Fence FittingsChain Link Fence FittingsChain Link Fence Fittings
          FeaturesNo Additional FeaturesNo Additional FeaturesGalvanizedNo Additional Features
          View ProductView ProductView ProductView Product