Store SKU #
A: Dear Ryan, Unfortunately, this track barrow do not offer an option to attach a ball hitch for towing. Thank you,
A: Yes it move backwards. Everything is great but the transmission...it is sticky, doesn't always engage, really very frustrating, but other than that, work horse. Be sure to tighten all bolts and screws, especially on shifter. I put lock tight on nuts/threads on undercarriage as they kept coming lose. You can dump as you go backwards, if you have somebody control the dump deck while you drive...too hard to do otherwise.
A: Dear customer, model YD8203 will not meet your needs, but model YD8105 can, when you move backwards, you can adjust the dumping angle at any time. Thank you,
A: In my opinion what you want to accomplish is something you can finesse with this excellent piece of equipment. Because the track barrel has a reverse gear and the front panel can be adjusted out to create a gap to allow some gravel out, yes I know gravel would flow down and trough the gap. It wouldn’t take long to get the hang of it. I love my track barrel and consider it my best investment for use around my sloping acre and third.on a hill. I have moved gravel, bricks, blocks, dirt etc with ease. Starts up with first pull every time! Wouldn't want to live where I live without it.
A: You cannot control dump angle or reach dump handle when moving. When loaded it takes strong effort to lift dump bed. You can then back up and let load empty as you move but will spread over only a few feet. I built a high wall plywood bed insert with easily removable dump gate so I could fully load the bed and still be able to get the gate off to dump. It works great with full heavy load but not designed for controlled dumping.
A: Yes it has a reverse gear on the handle so you can dump the load while moving backwards at the same time.
A: You would have to make adaptors for the rear gate. If you do that it you can open the rear gate about 4 inches, be careful of the weight of the gravel when you tilt it up could cause the adaptor that you made to fail. Hope this helps
A: Dear customer, we don't recommend fully tilting the bed. Thank you,
|Name||YD8103 Track Barrow, 660lb. Capacity, Briggs CR950, 6.5 hp, 208cc||YD8203 Track Barrow - Flatbed, 660lb. Capacity, Briggs CR950, 6.5 hp, 208cc||YD8105 Track Barrow with Hydraulic Assist, 1100lb. Capacity, Briggs CR950, 6.5 hp, 208cc|
|Capacity (cu. ft.) - Total||4.3 cu ft||4.0 cu ft||7.9 cu ft|
|View Product||View Product||View Product|