Constructed out of YellaWood brand pressure treated pine, this durable and beautiful Grill Table Kit comes to you ready to assemble in less time that it takes to warm up your charcoal. The high grade, KDAT (kiln dried after treatment) boards provide a beautiful appearance and allow you to apply a custom finish to complement your backyard living space. Simply open the box, position the pieces, attach 8 bolts (included) and fire up the grill.
Pressure treated for long-term protection against rot, fungal decay and termite attack
Paint or stain immediately
Lots of tabletop of workspace
Storage shelf underneath
Fits ceramic charcoal grills in the following diameters: 13 in., 15 in., 18.25 in., 22 in., and 22.5 in.
Q:Hello, please advise if 18” Kamado Joe, Classic Joe II Egg Ceramic Grill would fit in the whole. I saw that it says that the whole is 22.5” in diameter, but the 18 “ Green Egg has around 27” in the widest part. Please advise. Thank you
by|Oct 30, 2023
1 Answer
Answer This Question
A: The widest part of the opening, the diameter, is 22.5 inches wide. If any part of your grill is more than that, it will not fit.
by|Oct 30, 2023
Q:Does this fit a medium big green egg and can this be stained with a different color?
by|Oct 9, 2023
1 Answer
Answer This Question
A: Yes it will fit the medium size. You can stain it whatever color you would like.
by|Oct 10, 2023
Q:Can you dissemble this to put it away for the winter?
by|Aug 2, 2023
1 Answer
Answer This Question
A: I suppose you could, but it was not designed for use in that manner.
by|Nov 1, 2023
Q:Has anyone bought this for a Large Big Green Egg? Seems like the answers are mixed
by|Jul 4, 2023
1 Answer
Answer This Question
A: Every grill is different. Here’s what to know. The cutout on the table is 22.5 inches to help you determine if the large size BGE will fit.
by|Jul 5, 2023
Showing 1-4 of 86
Customer Reviews
4.2 out of 5
(164)
4.2
out of 164 reviews
94% recommend this product
5
86
4
42
3
19
2
2
1
15
Filter by:
Showing 1-10 of 164 reviews
Jul 2, 2023
great table as is however you can make it so much more
Table is good as is, BUT if you make a few tweaks/adjustments you’ll have a solid table costing twice as much if you buy one ready to go. As mentioned by several reviewers, adding supports for the heavier ceramic grills is a good idea and not difficult to do. In order to install castors I had to add 2x4s to each leg. By no means am I a woodworker but in order to get the additional 2x4s flush to the bottom I had to chisel out a notch into the pre-installed 2x4 (see picture). Not sure how necessary this was but I wanted the additional support and wanted to make sure the casters install flush. I would also strongly recommend filling in all the nail holes in with wood putty before painting. Make sure to sand the excess putty before painting. After adding the additional wood, I stained the table and installed casters. It took me a day and a half to finish the entire project.
by
Recommended
Oct 22, 2022
Good table bad packaging
Once put together, very good, solid table for my Kamado Joe grill. But, the shelf had several boards missing (see picture). I had to nail them in. I am probably a 5/6 out of 10 in handiness. I am glad there were only 8 bolts. A bit challenging for me.
by
Recommended
Sep 2, 2022
Worth the Investment
A in all a good addition to your grilling experience. I replaced the supplied legs with some longer boards to make the table a little higher.
by
Recommended
Jul 19, 2022
Just what I needed
Finished putting it together and adding the stain! Had to put a few extra screws in it to stabilize it but worth the money I love it. Made a few modifications for the Webber to fit and it’s perfect
by
Recommended
Apr 12, 2022
Love my grill table
Love my grill table. Was delivered April 6th 2022 my handy man Thank God for him stained and then 3 coats of seal coating. Took the idea from one of the guys here to use 1/2" electrical conduit clamps but to straightened them out now for the shelf going to get 2ftx3ft galvanized steel sheet to protect the shelf. He also used L brackets and piece of wood to hold the lid with the Material from my master touch grill for the lid.
by
Recommended
May 18, 2021
This table is good for the most part easy to assemble. But one leg was split all the way down the...
This table is good for the most part easy to assemble. But one leg was split all the way down the middle. It will need painting or staining within a year. It was really to large for what I wanted it for but nothing else was available for the Vision Kamado cadet grill that was wood. I love the height not the length. But the cadet grill fit just fine with one paver under it. The only reason I gave it only 3 stars was due to the one leg being split. The rest of the table was in good condition.
by
Verified Purchase
Recommended
May 3, 2021
Good quality, I have been customizing this table to my liking. But good quality!
Good quality, I have been customizing this table to my liking. But good quality!
by
Verified Purchase
Recommended
Feb 17, 2021
Best money I have spent
https://youtu.be/flv84aiq6Nc...
Best money I have spent
https://youtu.be/flv84aiq6Nc
by
Verified Purchase
Oct 23, 2020
Was exactly what we needed. Solid and sturdy. Stained nicely.
Was exactly what we needed. Solid and sturdy. Stained nicely.
by
Verified Purchase
Recommended
1 found this review helpful
Sep 28, 2020
Buyer Beware: This table comes with the wrong bolts. Ours came with zinc plated carriage bolts ...
Buyer Beware: This table comes with the wrong bolts. Ours came with zinc plated carriage bolts that were too large for the holes, had a square neck on them that did not fit into the holes and they should have been galvanized for outdoor use or they will rust. I had to drill out the holes to the correct size and run up to HD to buy the right bolts, nuts, and washers to put this table together. Seems solid, but was a pain to have to go buy the right hardware.