A: Hello Dear Customer, may not work with Lutron caseta system, but work well with LEVITON ODD24-IDW SMART WALLBOX, Lutron and others 0-10V dimming system. Thanks, EESGI Tech support
A: Yes, I installed 3 in a 2x2 drop ceiling. They work with both the wall switch and with the remote. Great lights!
A: Hello Patricia, Yes, you can, if you have a wall switch (or connect with existing switch) will be better to operate. refer video link: https://youtu.be/687nD7XGDNo Thanks, EESGI Tech support
A: Yes they can, they fit perfectly in a 2ft drop ceiling and will work altogether on a wall switch or the remote control. Very easy to install.
A: A switch is recommended as it needs main power to turn off and on. Once the switch is turned on, the remote can control the light fixtures. While the ligjts are turned off with the remote, power will still run through the fixtures which instruction states that's not recommended. I also don't know how this will affect your electric bill without a switch.
A: Hello Bruce, here you go: https://www.homedepot.com/p/eSenLite-2-ft-x-4-ft-LED-Ceiling-Light-Universal-Surface-Mounting-Frame-Kit-for-Flat-Panel-EEFPTL-SMF-2x4/315054135? or https://eleding.com/eefptl-rc-accessories-1 Thanks, EESGI Tech support
A: Hi Alan, The thickness (height) of the fixture is: 1 3/4" from top of the LED driver (8" x 3 3/8") to the bottom of lens/light fixture; 3/8" is the lens thickness. This fixture is ultra thin, so works well if you have minimum height clearance between your drop ceiling and floor joist above. I'm not certain about the LED rated dimmers from the manufactures you've listed. HOWEVER, I would highly recommend you get the wireless remote that is included with the 4-pack. I didn't want to open up walls to run a 14/3 NM cable for 3-way light switch, so I went with the wireless remote. The remote allows you to turn on/off, dim at 4 different brightness and 4 different colors (CCT) all while using a regular 2-way switch. Hope this helps.
A: Panels are about an inch and half thick. Dimmer would probably work but not sure if it would remember color. There is a wall and handheld dimmer that the company sells that does it all
A: Hello Alan, its thickness is 1.38", and compactable with all standard 0-10V dimmer for dimming and On-Off. but use with provided tri-function 2.4G RF-control in more flexibility for dimming, CCT and On-Off and without running any 2C. additional low voltage control cable and up labor cost. Please refer: https://youtu.be/687nD7XGDNo and https://eadn-wc01-1928005.nxedge.io/cdn/pub/media/wysiwyg/PDF/EEBPTL2450W-RC.flyer.v1.1.pdf. Thanks, EESGI Tech support
|Name||2 ft. x 2 ft. 4200LM 400W Equivalent White Dimmable Color CCT Thin Aluminum Integrated LED Panel Light Troffer (2-PK)||2 ft. x 4 ft. 34-Watt/96-Watt Equivalent Integrated LED White Troffer 3500K/4000K/5000K (2-Pack)||1 ft. x 4 ft. 400W Equivalent 4200LM Dimmable CCT White Integrated LED Panel Light Flush Mount Troffer w/ Frames (2-PK)||2 ft. x 2 ft. 4200LM 400W Equivalent White Dimmable Color CCT Thin Aluminum Integrated LED Panel Light Troffer (4-PK)|
|Compatible Bulb Type||Integrated LED||Integrated LED||Integrated LED||Integrated LED|
|View Product||View Product||View Product||View Product|