Return this item within 90 days of purchase.
The iLIVING Shutter Exhaust Fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. Equipped with the newest Thermospeed Controller which can easily control the temperature and speed. Auto cycle On/OFF at your desired temperature. The fan comes fully assembled out of the box.
Dimensions: H 5.75 in, W 15 in, D 15 in
Coverage Area (Sq.Ft) | 1200 | Cut-Out Diameter (in.) | 13 |
---|---|---|---|
Net-Free Area (Sq. In.) | 12 | Product Depth (in.) | 15 in |
Product Height (in.) | 5.75 in | Product Width (in.) | 15 in |
Rough Opening Height (in.) | 13 in | Rough Opening Width (in.) | 13 in |
Airflow (CFM) | 960 | Amperage (A) | 0.6 A |
---|---|---|---|
Color Family | Silver | Color/Finish | Silver |
Drive Type | Direct Drive | Features | Automatic Shutter, Corrosion Resistant, Speed Control, Thermostat Controlled, Weather Resistant |
Horsepower (hp) | 1/20 hp | Intake/Exhaust | Exhaust |
Material | Aluminum | Mounting Position | Gable Mount |
Power Type | Electric Powered | Product Weight (lb.) | 10.15 lb |
Recommended Sq. Ft. | 1200 | Returnable | 90-Day |
Ventilation Type | Exhaust | Voltage (V) | 115 |
Wattage (watts) | 65 |
Manufacturer Warranty | 1 Year Parts and Components |
---|
Yes, remove excess heat, moisture, and unpleasant odors from any commercial location
Hello, Thank you for reaching out. The item does not come with a power cord included, it requires hardwiring. This means you’ll need to connect it directly to your electrical system.
Hello, Thank you for reaching out. This item is designed primarily for ventilation, meaning it helps remove excess heat, moisture, and odors from spaces like garages, attics, and workshops. It doesn’t generate heat itself; instead, it works to expel hot air from the area, helping to cool it down.
The thermospeed controller must be plugged into a dedicated outlet and must be installed next to the shutter exhaust fan, where the power cord is going to be plugged into the thermospeed controller. The sensor is on the thermospeed controller and not on the fan.
Hello, Thank you for reaching out. The plug for the 12-inch Shutter Exhaust Fan with Thermospeed Controller should be inside. This ensures that the electrical components are protected from weather elements and potential damage.
Yes, you can put an air vent for air intake and better circulation in the garage, opposite where the fan is installed.
65dBA
Solar Roof Attic Exhaust Fan- https://ilivingusa.com/collections/solar-fans
Yes, as long your generator output is higher than 65 watts.
Viewing 1-8 of 81
4.6 out of 5