#1 Home Improvement Retailer

1736 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent

$11499
Limit 5 per order
$143.75
Save $28.76 (20%)
Apply Now
Pay $89.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Corrosion-resistant design holds up to the elements
  • Galvanized steel construction
  • Outfitted with automatic shutters
  • View More Details
Store
0 in stock
caret

Product Details

The iLIVING Shutter Exhaust Fan is perfect for removing excess heat, moisture and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns and greenhouses. This fan features aluminum blades, OSHA compliant wire guards and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 in., 12 in., 16 in., 18 in., 20 in., 24 in., 30 in. and 36 in.; the 18 in. shutter fan has both a variable speed model and a single speed model. The iLIVING 30 in. and 36 in. shutter fans are only available in single speed. For variable speed models, the ILG8SFSC speed controller is sold separately.
  • 18 in. variable speed shutter exhaust fan with automatic shutters
  • UL listed with speed controllable, permanently lubricated motor
  • Corrosion-resistant with OSHA compliant wire guards
  • Galvanized steel frame with aluminum shutters and fan blades
  • 120-Volt, 1/15 HP, 0.85 Amp, 1060 RPM, 1736 CFM
  • Recommended for use with the ILG8SFSC model speed controller (sold separately)
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

216Questions
caret
Q:Your site says the iLiving 1736 gable fan model ILG8SF18V is ?frequently bought together with the Master flow thermostat model PT6, sku 144967. You should remove this from the website as it does NOT work with that model.
by|Mar 22, 2023
1 Answer
Answer This Question

A:  Hello, Please note that we do not pair other products with ours. That is the function on Home Depot's website. We do not have control over that.

by|Mar 24, 2023
    caret
    Q:Can I use this fan as an attic vent from the gable?
    by|Mar 1, 2023
    1 Answer
    Answer This Question

    A:  Thank you for reaching out yes this fan is designed to be used as a Gable vent fan.

    by|Mar 1, 2023
      caret
      Q:Does the noise level go up was the fan size does? What are the decibel levels of each size?
      by|Jan 27, 2023
      1 Answer
      Answer This Question

      A:  Thank you for asking, I am sorry that it doesn't appear the manufacturer provided us with that information for the listing.

      by|Feb 7, 2023
        1 found this answer helpful
        caret
        Q:Is this a good fan for wood shop ventilation or is it more meant for temperature control for attics etc?
        by|Oct 3, 2022
        1 Answer
        Answer This Question

        A:  Yes, this is a great fan for wood shop ventilation

        by|Oct 7, 2022
          Showing 1-4 of 216
          caret

          Customer Reviews

          4.5 out of 5
          (466)
          • 4.5
            out of 466 reviews
          • 90%recommend this product
          Filter by:
          Showing 1-10 of 466 reviews
          Quietly does what its supposed to do.
          Great fan. I was a bit concerned about noise, but the only way I know it is running is to look in the attic or go outside and look. I installed a thermostat to control the fan operation so it isn't running 24/7. Comes with the louvered vent which is a plus. I did have to tweek the top louver because it didn't close flush like the other 2 did, but not a big issue. I installed a sub floor in the attic and this fan helps to keep that area a little cooler for the articles stored there. Also helps to keep the house a little cooler by drawing off some of the heat that might radiate down into the living space. Multiple sizes available, so match the size fan to the area you want vented. So far no complaints.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          Very easy to install I used it for exhaust fan for my generator shed. Great product
          Very easy to install I used it for exhaust fan for my generator shed. Great product
          by
          • Verified Purchase
          • Recommended
          The fan real capacity at high speed is less that 500 cfm
          I bought this fan two years ago. From the beginning its capacity was much lower than 1750 cfm. As a mechanical engineer I was able to measure its air change in my garage and my measurement showed around 400-500 cfm capacity. I had to fix its shuttle all the the time open to get this 500 cfm. I have make up air louver in the garage. During the past two years, its speed became slow and slower and then stopped. Now I have to throw away this fan. It seems there is not any quality control of this product.
          by
            4 found this review helpful
            Exactly as described
            Exactly as described
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Bought this size, thinking it would fit between studs in a wall. It does not. Had to cut 1/4 in...
            Bought this size, thinking it would fit between studs in a wall. It does not. Had to cut 1/4 in off. Otherwise it's fine
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            This fan changed our lives! We live in a converted loft and have bad airflow. This fan pulls in...
            This fan changed our lives! We live in a converted loft and have bad airflow. This fan pulls in the air and cools our loft down. Multiple speeds. Not very loud.
            by
            • Verified Purchase
            • Recommended
            6 found this review helpful
            I purchased this exhaust fan to vent smoke from soldering electronics and chemical fumes when etc...
            I purchased this exhaust fan to vent smoke from soldering electronics and chemical fumes when etching printed circuit boards. Mounted about 2 feet above my workbench, it does a pretty darn good job at sucking it all out before it can get in my face. That said, the shutters simply aren't heavy enough to fully close on their own, and anything more than a slight breeze gets them flapping open and shut pretty good. As you can see in the picture, it stays about 1/4" - 3/8" open at all times. For an attic vent or the like, it's probably not a big deal, but the clacking sound it makes is loud enough to be very annoying when it's right above your workbench. Another reviewer mentioned that they used some small magnets to keep it shut when it wasn't in use, but the shutter flaps themselves aren't attracted to magnets and I couldn't find a position on the steel connecting bar between them that'd hold them shut reliably while still opening when the fan was turned on. Maybe if you played around with different sizes and strengths. I feel like they could have solved this problem by making the flaps a little heavier or by putting in a magnetic closure.
            by
              • Recommended
              3 found this review helpful
              Product works, but came without a power cord. You will need to purchase separately /install a thr...
              Product works, but came without a power cord. You will need to purchase separately /install a three-prong plug and power cord to make the unit work.
              by
              • Verified Purchase
              • Recommended
              3 found this review helpful
              This is iLIVING’s 18”, louvered, variable speed, exhaust fan. The hardest part of the installatio...
              This is iLIVING’s 18”, louvered, variable speed, exhaust fan. The hardest part of the installation was figuring out how to mount it (the manual gives all the dimensions you need, but doesn’t really help you with installation ideas). I’m using the fan in my garage to exhaust saw dust (from my shop) and hot air in the summer months. I found a nice spot in the gable—the space between the studs was just right, and the studs are installed on the flat. However, I have 9/16” sheetrock on both the interior and exterior of the wall (fire wall). If I cut a square hole and mount the fan from the inside (on to the studs), it does not protrude all the way through the wall, so I’d have the raw edges of the siding and sheetrock exposed on the outside, which I would have to seal. The next option would be to cut a round hole and mount the fan from the outside. This turned out to be not such a good idea—I’d have to cut through the studs. What I finally came up with was to separate the fan from the louvered frame (easily unscrews) and mount the fan on the inside and the louvers on the outside. Then I can easily trim and caulk the louvers for a water-tight installation. This worked out great outside (see photos 1 and 2). Then I added a power cord, wired in a receptacle with a variable speed control and it’s done. The fan itself works great at all speeds. It’s particularly quiet, and draws a lot of air—I can feel the air flow with the garage door open. My man-door tends to close by itself, but with the fan on and the garage door closed, the flow of air causes it to stay open about 8 inches—great indicator of how much air is being moved by the fan.
              by
              • Verified Purchase
              6 found this review helpful
              Is easy to installs, works properly, gives a nice touch to the kitchen. And no smell of food sta...
              Is easy to installs, works properly, gives a nice touch to the kitchen. And no smell of food stay inside while I cook. I really loved it.
              by
              • Verified Purchase
              • Recommended
              Showing 1-10 of 466 reviews

              Frequently Bought Together

              Top Rated
              +
              +
              Price:
              $11499
              $143.75
              Save $28.76 (20%)

              Compare Similar Gable Mount Attic Fan

              current product
              Top Rated1736 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent
              772 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent1736 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent4244 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent
              BrandiLIVINGiLIVINGiLIVINGiLIVING
              Name1736 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent772 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent1736 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent4244 CFM Silver Electric Powered Gable Mount Shutter Fan/Vent
              Price
              $11499
              $143.75
              Save $28.76 (20%)
              $14999
              $16250
              $29386
              Ratings
              (466)
              (55)
              (74)
              (74)
              FeaturesAutomatic Shutter,Corrosion Resistant,Weather ResistantAutomatic Shutter,Corrosion Resistant,Weather ResistantAutomatic Shutter,Corrosion Resistant,Thermostat Controlled,Weather ResistantAutomatic Shutter,Corrosion Resistant,Thermostat Controlled,Weather Resistant
              Power TypeElectric PoweredElectric PoweredElectric PoweredElectric Powered
              Net-Free Area (Sq. In.)19131925
              Drive TypeDirect DriveDirect DriveDirect DriveDirect Drive
              MaterialAluminumAluminumAluminumAluminum
              Mounting PositionGable MountGable MountGable MountGable Mount
              View ProductView ProductView ProductView Product