Max 1/2 in. Push-to-Connect Brass Residential Water Hammer Arrestor Tee

Most people don't know about the mini water hammer arrestor tee with PEX barb x barb connections, whether it is hot or cold, can do wonder for the noise-prone pipe system. The banging in pipes can basically be solved by installing PEX mini-rester whether it is horizontal or vertical. Most PEX plumbing symptom of banging occurs due to the high-pressure rush or surge of water flowing through the pipe rapidly. The sudden reversal of flow send shock waves can put pressure on the pipes causing damage in certain places such as joints. The hammer arrestor with a piston in the air chamber comes to the rescue by relieving pressure inside the pipes. The water inside the air chamber pushes the piston in by compressing the air to subsides the pressure. PEX water arrestor is generally flexible and can be installed in any direction whether horizontally or vertically. The tee size AA PEX barb connections 1/2 in. connects with PEX pipe tubing and can be crimped or clamped for a tight seal to prevent water leaks. The maximum working temperature can handle 250°F and working pressure of 300 psi. You'll be glad that the water flowing in the pipes ensure noise-free environment providing some peace of mind. You can expect reliable performance from the water hammer arrestor with NSF seal. DZR brass construction of mini rester is lead-free and meets UPC, IPC and cUPC requirements. It is also compatible with PEX stainless steel clamp and copper crimp ring systems.

SharkBite Max push-to-connect tee with water hammer arrestor is the fastest and easiest way to help eliminate water pipe banging in your home. The newly designed fitting allows you to make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesn't require a PEX tube liner. No soldering, clamps, unions, glue or special tools are required for installation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.).

The 6-1/4 in. x 7/8 in. 1260XL-A Water Hammer Arrestor with 1/2 in. MNPT thread and 1 - 11 fixture unit capacity is used in a mixture of residential, commercial, and industrial water line applications for protection against over-pressure during surges following quick valve closure. Excessive pressure surges are absorbed by the pre-charged air cushion that is permanently sealed within the water hammer arrestor. The 1260XL can be installed within a stud bay, eliminating the need for an access panel. Features include all copper and brass external construction, a temperature range of -40°F to 212°F, and a maximum transient pressure surge of 150 psi following quick valve closure.