Click Seal 1/2 in. x 7/8 in. x 12 in. Push-to-Connect Angle Stop Toilet Connector
- Push to Connect system, quick and easy installation in seconds
- Works on any combination of Copper, PE-RT, CPVC, PEX Pipe
- DIY Kits provide everything you need to complete the job
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
The 1/2 in. SharkBite Click Seal Toilet Connector is the easiest way to install a new Toilet Line. The valve is perfect for potable water and hydronic applications where a shut-off is needed. Using SharkBite fittings is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. The "Click" Seal technology also means there is no need for tools, simply turn the Click Seal nut until it clicks and you have a secure seal.
Highlights
- Push-to-connect design makes for quick and easy install, requires no solder, glue, unions, or tools
- Click-seal nut provides an audible "click" to ensure a sealed connection without the need of tools for install
- Connects to copper, PEX, CPVC or PE-RT pipe
- Quarter-turn valve for easy on/off flow control
- Lead free DZR brass construction for durability and reliability
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution
- Corrosion resistant to improve longevity
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC, and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200°F and 200 psi
- Shop SharkBite for all you Supply plumbing needs
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Additional Resources
Shop All SharkBiteSpecifications
Dimensions
Inlet Diameter (In.) | 3/4 |
|---|---|
Outlet Diameter (In.) | 3/4 |
Product Length (in.) | 13 in |
Details
Application | Potable Water |
|---|---|
Color/Finish | Chrome |
Compatible Pipe Material | Multi-Purpose |
Compatible Product | Toilet |
Connection | PTC |
Features | Lead Free |
Indoor/Outdoor | Indoor |
Material | Brass |
Maximum Pressure (PSI) | 200 |
Maximum Working Temperature (F) | 200 |
Pack Size | 1 |
Returnable | 90-Day |
Valve Configuration | Angle |
Warranty / Certifications
Manufacturer Warranty | For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242. |
|---|
Questions & Answers
will this fit glacier bay high efficiency dual flush toilet model n2316
Hi, The SharkBite Click Seal 1/2 in. x 7/8 in. x 12 in. Push-to-Connect Angle Stop Toilet Connector will fit your Glacier Bay toilet if it has a 7/8" BC connection. If you have any more questions you can call tech support at 877-700-4242. Kind regards,
The water pipe (white tube) behind my toilet only comes out of the wall 4 inches, not 6”. Is this OK or will I have to extend it somehow before I install this? Thank you so much.
Hi Amie, Thank you for contacting SharkBite. You will not need to extend the pipe behind your toilet in order to install the Click Seal 1/2 in. x 7/8 in. x 12 in. Push-to-Connect Angle Stop Toilet Connector. If you have any more questions please call tech support at 877-700-4242. Kind regards,
What is the inner diameter of the pipe? Is it 1/2" or 7/8? Does anywhere it goes below 1/2". I have a tankless smart toilet, that requires minimum 1/2 pipe connection. Does it work for that?
Hi, Thank you for contacting SharkBite. The SharkBite Click Seal 1/2 in. x 7/8 in. x 12 in. Push-to-Connect Angle Stop Toilet Connector has a braided hose that is smaller then 1/2". Unfortunately, we do not make a flexible connector with a 1/2" water line. If you have any more questions you can call tech support at 877-700-4242. Kind regards,
When I need to Replace Fill Valve, Do I have to throw everything away, because braided line is permanently connected to water supply valve? Usually install a new Braided Line with fill valves. Can the rubber washer inside come out for replacement?
Hi, The SharkBite Click Seal 1/2 in. x 7/8 in. x 12 in. Push-to-Connect Angle Stop Toilet Connector can be reused. Unfortunately we do not offer any replacement washers. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)
Will this fitting fit 1/2?polyvinyl chloride pipe?
Hi. The SharkBite Click Seal 1/2 in. x 7/8 in. x 12 in. Push-to-Connect Angle Stop Toilet Connector will not connect to poly vinyl chloride pipe. It will work with the following pipes. PEX (ASTM F876, CSA B137.5) Copper (ASTM B 88) CPVC (ASTM D 2846, CSA B137.6) PE-RT (ASTM F 2769) HDPE (SDR-9 ASTM D2737). If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)
Can this be installed on 1/2” copper pipe that has been previously soldered? If so, how much of the old solder has to be removed? Thanks
The pipe needs to be clean and smooth. Solder should be removed
All old solder will have to be removed before installing a Sharkbite fitting
Does this come with a matching escutcheon plate/cover?
It didn't come with one. Since I was upgrading to this, I didn't need a new plate cover.
Yes.
Just received mine and it did NOT come with the escutcheon. Kind of annoying that I have to make another trip or order to get one.
I have a 4" chrome pipe that is a little bigger 1/2" copper, looks likes it is soldered over a 1/2" copper toilet fill line. I want to put a new shutoff elbow valve on the chrome pipe. Will a 1/2"X 7/8"X 1/2" push -to - connect angle stop toilet valve work on the chrome pipe ?
Hello, Unfortunately, SharkBite push-to-connect products are not suitable for use over chrome plated pipe. If you have additional questions please don't hesitate to reach out to our technical support department at 877-700-4242. Best Regards,
Viewing 1-8 of 13
Customer Reviews
4.7 out of 5
5
183
4
25
3
6
2
2
1
8
