X-440 5 gal. Pail Clear Concrete Sealer and Water Repellent

GHOSTSHIELD SILOXA-TEK 8505 A tenacious and versatile sentinel-all the heart of Siloxa-Tek 8500 with added oil resistance. NO OIL, NO ODOR, NO NONSENSE: Defend your concrete from water ingress, deicing salts and oil with confidence. This water-based formula makes oil and grease stains easier to clean, and resists freeze-thaw damage, mold and mildew. It's the perfect sidekick for even the most mobile voyager. GET OIL & GREASE OFF THE STREET: Use Siloxa-Tek 8505 on a variety of concrete, brick and masonry applications where oil, grease, mold and mildew are the primary concern. It's easily applied with a low-pressure sprayer, roller or brush, and provides long-lasting ward to help you clean up the scum. DRIES INVISIBLE: Imbue your concrete with the power of resistance while preserving the original appearance. Available ready to use or concentrated (5x). Use stand-alone or pair with a densifying primer like the Lithi-Tek 4500 to increase performance and abrasion resistance.

V-100 Premium is high performance water based two part Acrylic-Epoxy system that will provide an exceptional level of protection to many types of hard surfaces. It is an extremely durable coating that will easily resist water and alkali cleaners from penetrating into your concrete surface. V-100 Premium will provide a long lasting coating on concrete, brick, stone and mortar and will not peal or flake. It is UV stable and will not turn yellow. It will protect your concrete against frost and salts while increasing its resistance to stains, acids, oils and moisture. It is environmentally friendly, non-toxic and non-flammable. V-100 Premium is easy to mix and easy to apply with a finish that will resist mold and mildew. It essentially is a "self-cleaning" coating that will make routine maintenance fast and easy and keep your concrete looking fresh and new. It can be used in interior/exterior and residential/commercial applications.

RadonSeal PLUS Deep Penetrating Concrete Sealer is a permanent, water-based concrete sealer and densifier designed to seal, strengthen and protect porous poured concrete, concrete blocks and cinder blocks from within. Ideal for basement waterproofing and foundation protection, RadonSeal PLUS penetrates deep below the surface and chemically reacts with minerals in concrete to seal pores and capillaries, helping reduce water seepage, moisture vapor, efflorescence and radon gas infiltration.Unlike topical concrete sealers and waterproofing coatings, RadonSeal PLUS does not form a film. The mineral-forming reaction becomes an integral part of the concrete, creating a permanent internal seal that will not peel, flake or wear away. The breathable treatment maintains the natural appearance of concrete while helping strengthen porous surfaces and reduce dusting, pitting and spalling.Ideal for basement floors, foundation walls, concrete slabs, concrete block and cinder block walls. Treated surfaces remain suitable for paints, coatings and adhesives. The zero-VOC, low-odor formula is ready to use and easy to apply with a low-pressure sprayer. RadonSeal PLUS is recommended for older or more porous poured concrete and for concrete block and cinder block. It may also be used on newer poured concrete when a more aggressive penetrating formula is desired.Approx. coverage per 5 Gal.: poured concrete 875-1,125 sq. ft.; concrete block 500-725 sq. ft.

RainGuard Clear-Seal Acrylic Urethane is a film forming water repellent that dries down to a clear, decorative gloss finish. It is a non-yellowing, low odor, low VOC, and non-toxic wood, concrete, and masonry sealer. Clear-Seal creates a clear glossy film that protects and beautifies a variety of surfaces. Formulated to be resistant to stains, heavy foot traffic, and UV damage. Ideal for use on vertical/horizontal, painted/unpainted, interior/exterior surfaces such as: concrete, pavers, wood, brick, stucco, natural and artificial stone, unglazed tile, and masonry. Not for use on surfaces subject to hot tire traffic.