Q:will home depot cut this plywood so it will fit in the back of my vehicle.
by|Apr 21, 2020
7 Answers
Answer This Question
A: A few years ago they would not cut pressure treated material
by|Dec 17, 2020
1 found this answer helpful
A: Yes! Last time I got plywood from Home Depot, they would do cut 2 cuts it for free . I am about to pickup 2 more sheets and I will have them cut it for me.
by|Apr 11, 2021
2 found this answer helpful
A: As long as the saw is working yes. Call ahead
by|Sep 30, 2020
1 found this answer helpful
A: Sometimes due to the smell of cutting PT lumber some stores refuse to rip the plywood, I think it all depends on the store or maybe who is doing the cutting.
by|Mar 11, 2021
1 found this answer helpful
A: last i knew some stores wouldn't cut pressure treated wood. they have for me before though. Id ask to make sure before you buy it.
by|May 12, 2021
A: depends on the size of your vehicle moron
by|Jul 26, 2021
1 found this answer helpful
A: Yes, but you have to put it back together again
by|Jul 5, 2021
1 found this answer helpful
Q:What grade is this "AC", "BC", "CD" etc?
by|Apr 17, 2020
2 Answers
Answer This Question
A: AC/DC
by|Jun 28, 2021
A: Biewer Lumber plywood supplied to THD is graded CD.
by|Nov 10, 2020
1 found this answer helpful
Q:Can I use this plywood for a deck
by|Apr 16, 2020
2 Answers
Answer This Question
A: Pressure treated plywood at THD is treated to ground contact, so it could be used. However, plywood is probably not the most ideal product for a decking application. Decking requires drainage and ventilation.
by|Nov 16, 2020
1 found this answer helpful
A: No
by|Jun 28, 2021
Q:What is the specific chemical treatment of this plywood for exterior / interior use, such as micronized copper azole (MCA)?
by|Mar 14, 2020
2 Answers
Answer This Question
A: The chemical (MCA) is Micronized Copper Azole. It is a copper-based wood preservative used in the pressure treatment of wood products for use in residential applications above ground, in ground contact or in freshwater contact.
by|Sep 18, 2020
1 found this answer helpful
A: It is labelled Micronized Copper Azole (MCA) suitable for aluminum contact and fresh water use.
by|Aug 14, 2020
1 found this answer helpful
Q:Can i get plywood cut in half 2’ x 8’
by|Mar 7, 2020
3 Answers
Answer This Question
A: THD can cut the material in store.
by|Mar 12, 2020
A: No Jim, you can't.
by|Jun 28, 2021
A: Ask for Scott
by|Jun 28, 2021
Q:can this be cut 57x 45 inch piece and I pick up? wjc bill
by|Mar 2, 2020
1 Answer
Answer This Question
A: THD can cut the material in store.
by|Mar 12, 2020
Q:What is this treated with?
by|Apr 24, 2016
3 Answers
Answer This Question
A: The active ingredients commonly used in treated wood are alkaline copper quaternary (ACQ), copper azole (CA) or micronized copper azole (MCA). no arsenic!!!!!!
by|Jun 20, 2021
9 found this answer helpful
A: Says "pressure-treated" so I'm gonna go out on a limb here and guess that it has been treated with pressure
by|Jun 20, 2021
6 found this answer helpful
A: Most "treated" lumber is treated with copper, chrome and arsenic.
by|Jun 22, 2021
3 found this answer helpful
Q:Is this stainable
by|Apr 20, 2016
2 Answers
Answer This Question
A: Yes, this product is stainable and paintable.
by|May 3, 2023
2 found this answer helpful
A: Yes, but you'll need to wait a few months to let it dry out. You'll also want to take the slight green appearance int consideration when choosing your stain.