Questions and Answers for 3/4 in. x 48 in. x 8 ft. EB1S White High-Pressure Laminate Plywood Melamine Board

A:  No, only the main faces. You can purchase edge tape or use thin wood trim to finish the sides.

A:  I paid $69 for a 4x8 sheet before tax.

A:  Hi Marian, I would advise you visit or contact your local Home Depot store for pricing and availability. Please follow the steps below to localize your Homedepot.com: 1. Localize Homedepot.com using your zip code (My Store Location: Change) 2. Choose the store where you want to pick up the item (Make this my Store) We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

A:  Not every Home Depot carrys the melamine faced plywood. I had to call around and drive to the next county to get a sheet. Well worth it compared to other options.

A:  Thank you for your recent inquiry with The Home Depot, Scott. If they are not carried in your store, a specialist in your store may be able to special order them for you. Special orders are not available online. The vendor is Boise Cascade. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  Hi CS, it appears that this 3/4 in. x 48 in. x 8 ft. EB1S White High-Pressure Laminate Plywood Melamine Board is a store exclusive item and only able to be bought in a Home Depot store. Unfortunately we do not sell it with online stock for purchase. If you are unable to see the store inventory or price it is most likely either not a stocked item in your area or no longer available for purchase from Homedepot.com. I would advise you visit or contact your local Home Depot store for pricing and availability. Please follow the steps below to localize your Homedepot.com: 1. Localize Homedepot.com using your zip code (My Store Location: Change) 2. Choose the store where you want to pick up the item (Make this my Store) We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

A:  don't know, had mine cut by the store, and they could have used a better blade judging by the edge of the cut.

A:  Check saw blade manufactures recommendation’s, but a blade that can cut wood with higher tooth count will give better results.

A:  use finest blade, but before cutting, mark the melamine with a marker, then using a sharp and strong utility knife, cut the melamine along the mark. Then run your circular saw or table saw blade just on the cut melamine,staying just outside of the knife cut. Your saw will not cut the melamine, as it is all ready cut, but will cut the ply wood, thus sharp edge on melamine and good edge on ply wood. You can even sand it to perfection!

A:  Use the finest tooth blade you have. You can buy a blade specifically made to cut laminates if you wish. When cutting with a circular saw, cut with the finished (laminate side), DOWN. If using a table saw, cut with the laminate side UP

A:  You need a plywood blade with 80 carbide teeth or more. Chip out in the melamine surface is a problem. Use a sharp blade and go slow.

A:  I bought some self adhesive matching edging. You need to use a household iron to activate the glue. Then you need to trim it with an Xacto blade. Other options include thin wood molding or just leaving the edge visible, which is trendy.

A:  Hi Tom, unfortunately, this item appears to have been discontinued and is no longer in stock or available to be purchased on Homedepot.com. The item will remain briefly on the website for customer reference, and the description will be updated with “Discontinued” if it has not been already. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

A:  please contact the Pro Desk at your local Home Depot for assistance

A:  Hi David, and thank you for your recent inquiry with The Home Depot. This item is a Home Depot store exclusive and is not available to order online. Unfortunately, if you are unable to see the store inventory it is most likely not a stocked item in your area. For any other questions, please visit or call your local Home Depot store. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  I've only seen it in 3/4" nominal thickness, and had to drive to another county to get it.

A:  Both sides and smooth

A:  Both sides are laminated with Melamine. Melamine has a very slight texture to it. Melamine is layers of paper and foil sprayed with resin, then pressed and baked. It makes a very durable and wipe down friendly hard surface. Some folks use it as a kitchen countertop. It is not perfectly smooth like a sheet of glass, but more like an extremely fine orange peel or pebble texture.

A:  It is smooth. Both sides are laminated.

A:  This item is not available online. Please contact your local store. They can order it via Special Order. Thank you!