Questions and Answers for ADORN Shadowledge Slate 23.5 in. x 6 in. Stone Veneer Siding (Flats)

A:  Yes, it will work for both exterior or interior applications

A:  Usually the Adorn panels are attached to a concrete foundation using concrete fasteners to a depth of 1". It is generally recommended to use a WRB (30# felt) when installing Adorn over a concrete foundation. Local building codes may vary and must be adhered to. Please contact us at 402-379-2210 to discuss your specific project. Thank you for your interest in Adorn Stone for your project.

A:  Hi Beverly, we actually recommend you use screws through the aluminum flange to attach our stone. You can use a strong concrete adhesive for pieces where screws won't work. Please let us know if you have any other installation questions at 888.379.2210.

A:  Hi there, thanks for your order! We apologize that your box had 4 of the same pieces in it. It's not very typical that one box would have 4 of the same flats as we manufacture many different variations. Most boxes provide a variation. Please contact us at 888.379.2210 with more questions.

A:  Hi there! Yes, this can be applied to exterior brick. It can be installed by using masonry screws through the attaching flange. It is highly recommended you have the project area inspected before you begin installation to see if the brick can hold up ADORN.

A:  Yes it can. The first step is to insure that your brick is in good enough condition and stable to hold Adorn. If so, pre-drill and use a Tap con screw. Many home owners have done this with great success. Thank you.

A:  There are 4 square feet in each box of flats so you will need 70 boxes total.

A:  Hi there! For a 280 square foot project, you will need about 70 boxes.

A:  As long as your top piece is under an eve and protected from the rain you will be just fine.

A:  Yes, pre-drill your holes and use a Tapcon screw.

A:  The flats have a sheet metal flange at the top which is used to attach each one to the structure being covered. If you were covering an existing chimney you would just have to use masonry screws to attach the flats. Four flats are in each box so a box covers a little less than a two foot by two area.

A:  The flats are concrete with a sheet metal flange that is used to attach them to the wall structure with screws. If the distance from the woodstove to the wall meets code for a brick wall it should be okay. Each box has four flats so has a total square foot coverage of a little less that 4 square feet, so you need 16 boxes. That will leave you with two extra flats.

A:  Adorn siding is a concrete product so it can be installed behind a wood stove in most cases. Each box covers 4 sqft so you will need 16 boxes to cover 62 sqft. Please call NCP at 402-379-2210 with any additional questions and thank you for considering Adorn for your project.