Q:How would you put a 6 in. Sch. 40 pipe with a 6 5/8 outside diameter in this fitting which says it has a 6 in. dia opening?
by|Apr 21, 2021
1 Answer
Answer This Question
A: 6" is the nominal diameter. The nominal pipe diameter is based loosely on the inside diameter but is not exact. For our recommendations, please contact our Technical Services Department at 800-438-6091.
by|Apr 22, 2021
Q:The product description says SxSxS, but the photo shows a box of SxSxFPT. Can someone confirm which I will get when I order this?
by|Oct 30, 2020
3 Answers
Answer This Question
A: 10 ft. 1/2 inch schedule 40 PVC pipe.
by|Dec 13, 2023
A: SxSxS
by|May 25, 2022
A: Thank you for bringing this issue to our attention. The description is accurate but of course the images are wrong and we will be correcting them ASAP. Please be patient if you monitor this situation as it could take up to 48 hrs for the change to cycle through the Home Depot system.
by|Nov 13, 2023
1 found this answer helpful
Q:This this threaded on the bottom? if not can direct me to the item number of the 1/2 in. PVC Sch. 40 TEE that is threaded only on the bottom. thank you.
by|Aug 13, 2020
2 Answers
Answer This Question
A: there are no threads on this fitting anywhere. For our recommendations, please contact our Technical Services Department at 800-438-6091.
by|Apr 4, 2021
1 found this answer helpful
A: I bought the below thinking it was unthreaded but it was and I need to return. Here's the info. for the threaded (on bottom opening of the tee).
Charlotte Pipe 1/2 in. PVC Sch. 40 S x S x S Tee
Model # PVC024000600HD
Store SKU # 187909
by|Nov 13, 2023
2 found this answer helpful
Q:Can this be used underground for non-pressurized drainage purposes and connected with fernco 1056 44RC coupling?
by|Aug 9, 2020
1 Answer
Answer This Question
A: This fitting was designed to be used in a pressure application. For our recommendations, please contact our Technical Services Department at 800-438-6091.
by|Aug 10, 2020
Q:Do these fit on 1/2 inch pipes or do I need to buy a bigger size?
by|May 9, 2020
1 Answer
Answer This Question
A: Charlotte Pipe products should fit with like sizes. For our recommendations, please contact our Technical Services Department at 800-438-6091.
by|May 12, 2020
Q:Do you have half inch in HOT WATER pipe?
by|Nov 15, 2019
2 Answers
Answer This Question
A: This works well on the hot water system!
by|Apr 13, 2023
A: For our recommendations, please contact our Technical Services Department at 800-438-6091.
by|Sep 12, 2020
Q:can we use this for pumping air?
by|Dec 10, 2017
2 Answers
Answer This Question
A: Yes, you can use this for pumping air up to 600 PSI.
by|May 5, 2023
A: Charlotte Pipe does not recommend any of our products to be used for compressed air. Our products only meet the standards to be used for plumbing applications.