Questions and Answers for Delta Cassidy Single Hole Single-Handle Bathroom Faucet with Metal Drain Assembly in Champagne Bronze

A:  Hi Mac, Thank you for your question the 1.5 GPM at 60 PSI is the maximum when the handle is in the full open position. The lower the PSI and the lower the handle would decrease the flow of water. Best regards, Brandis

A:  it doesn't stick up

A:  Hi AT200, Thank you for your question. Delta Faucet model # 597LF-MPU has a lift rod that will extend 1 3/8" when your pop-up assembly is open. When it is closed, the lift rod will extend out 2 1/8" which is why we recommend at least 2 1/2" clearance to the backsplash. Thanks. Jody

A:  Hi Loo, Thank you for your question. Delta Faucet model # 597LF-MPU does not have a pressure adjustment other than the hot and cold handle. It depends on the pressure coming into your house to determine the pressure that is coming out of your faucet. Thanks. Jody

A:  Hi Richa, Thank you for your question. Delta Faucet model # 597LF-CZMPU has a 5 7/8" escutcheon plate included in the box as an option. Thanks. Jody

A:  Hi Bathlover, Thank you for your question. Delta Faucet model # 597LF-MPU has an escutcheon plate included in the box that can be used if you have holes that need to be covered up from a previous installation. The plate will be installed between the sink and the faucet. Thanks. Jody

A:  Hi Charlie, Thank you for your question. Delta Faucet model # 597LF-PNMPU flows at 1.5 gpm and can only be used on a lavatory sink. It does not have enough water output to be used as a tub faucet. Thanks. Jody

A:  Hi Kitt, Thank you for your question. Instead of using the Delta Faucet model # 597LF-MPU bathroom faucet for your wet bar sink, we would recommend model 9997-DST. It is the same as the kitchen version but it is smaller and will usually work as a bar prep faucet. Thanks. Jody

A:  Hello Cey, This faucet Includes optional 5-7/8 in. escutcheon for 3-hole, 4 in. installation. This will NOT cover an 8" spread holes. Detailed installation instructions can be found by clicking on the orange arrow beside the word “specification” which is below the photo of this product on Home Depot.com. Thank you for your inquiry. Charlotte

A:  No. I had to switch to a smaller copper under mount sink without an overflow. The drain with this faucet would not work. I had to order a separate drain that was listed with the smaller sink.

A:  Hi Cbinbr, Thank you for your question. Delta Faucet model # 597LF-RBMPU contains a pop-up assembly that is recommended to be used for sinks with overflow holes. We do offer push-pop drain assemblies that do not have overflow holes. We have model 72172-RB and 72174-RB. We also offer a grid strainer without overflow holes with model RP47648RB. Thanks. Jody

A:  Hi Ryan, Thank you for your question. Delta Faucet model # 597LF-RBMPU includes a pop-up assembly with overflow holes. Thanks. Jody