Questions and Answers for Delta Hot/Cold Indicator

A:  Hi Liliana, Thank you for your question about the Delta Faucet RP28906. Unfortunately, we don't carry a set screw cover for model 400LF-WF. This red/blue cover fits handles RP21469 RP28898 RP32183 RP38645 RP60095 Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Hi 11111222, Thank you for reaching out to Delta Faucet Company! We apologize for the inconvenience this may cause. Our handle buttons are model-specific and are not interchangeable. Please reach out to us directly so we can further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi Allie, Thanks for your question regarding RP28906! No, model 100LF-WF does not utilize a button cover. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

A:  I cannot say it will fit a specific faucet model but I believe it is pretty universal for Delta faucets - especially older models such as mine - now 20 years old.

A:  Hi busyv! Thank you for your question and we are happy to help. The 9178-DST red and blue indicator is the RP50585. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

A:  Hello Craig! Thank you for contacting us at Delta Faucet! I will be happy to help! Yes, this Delta Faucet RP28906 red/blue button will work for model 174-WF. Please contact us directly if further assistance is needed at this time.  Best Regards, Tim

A:  Hello Don. Thank you for your question about this product. I will be happy to help. The hot cold indicator button that fits the 467-DST is RP28184. Please feel free to contact us directly if you have any further questions. Best Regards, Theresa. Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com |

A:  Yes it will. Just pry out the old red/blue indicator with the point of a knife and press the new one in place/ Easy to do.

A:  Yes, absolutely. Pry the old one one and just press in the new one.

A:  Hi, Al! Thank you for your question. The Delta RP28906 will work with both the Delta 470 & Delta 470-DST models. Best Regards, George

A:  Yes it will. This indicator is compatible with the majority of Delta faucets, but definitely will fit the 470

A:  When installing make sure the red side goes to the left (hot side)

A:  Hi, doc! Thank you for your question. There are different sizes of red/blue buttons that fit different faucets. We recommend to call our Delta customer service line at 1(800)345-3358 so that we can assist you further with which button you need for your faucet. Best Regards, Rosanna

A:  No luck here either. I think the angle of the tab is wrong. Different length set screws didn't help either. Maybe cut the tab off of the back and use some kind of adhesive to hold it in place. Unfortunate , for the cost of this special tab.

A:  Three quick thoughts: [1] Assuming your faucet's retaining hole is curved or angled (i.e.: offset to the direction of screw-travel) is your Allen screw factory-spec, with correct hex-size and overall length? If not, this button could bottom-out before it's fully seated. [2] I'm more familiar with Delta's 'Hot/Cold' button that's designed for purely vertical screw-hole surfaces. On those, the 'plug' section is a 'split' design with two flexible plastic vanes separated by a large (approx. 3/16" wide) vertical space, in-between. Here, the 'plug' section is of cylindrical design. I'm not sure if this is an intentional variation of the two button-types -- 'angled' (as here) or not -- or if the item depicted here is just an aftermarket replacement.

A:  Don't feel bad. It doesn't work. Does not snap in like you think it would. I gave up.