Questions and Answers for Everbilt 22 in. Soft-Close Full Extension Side Mount Ball Bearing Drawer Slide Set 1-Pair (2 Pieces)

A:  tammy, Thank you for your question. The Soft-Close Full Extension Side Mount Ball Bearing Slides are designed for "Side" mount application. To better assist you with your specific application, please know that our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team

A:  These are the best gift that I have ever received! No more slamming drawers.

A:  They after 1-3/4”. Tall and about 7/16” wide 

A:  Barbara, Thank you for your question. The profile of the slides measures 1/2" (12.7mm) wide by 1-3/4" (45.5mm) tall. I hope this is helpful. Best, Customer Care Team

A:  angel, Thank you for your question. The shortest Soft-Close Full Extension Side Mount Ball Bearing Drawer Slide is the 14". If you present slide is 12", the 14" will be too long. Best, Customer Care Team

A:  They come with screws 

A:  We used wood screws (I thought they came with the sliders-?) and have a plywood shelf attached. It was been rolling bathroom baskets in and out of a cubby for over a year now. Very sturdy.

A:  Mike, Thank you for your question. The D94222E-ZP-W, drawer slides come with #6 x1/2 Pan Head Wood Screws for mounting. Best, Customer Care Team

A:  I used the screws from old hardware 

A:  Screws come with the draw glides. They are Phillips head pan screws. About a half an inch long.

A:  it depends on if the sides of the cabinet are flush or not 1.if the insides are flush just use 1/2" or 5/8" wood screws 2. if the insides are concave from the face frame you need to build a 2" back board 1/4" wider than the drawer opening-  attach the boots to the ends- flush put the slides in the boots and attach the front of the slides to the face frame then push the 2" board to the back wall -level it- square it straight and nail it to the back wall

A:  No they are not the correct ones should be -- https://www.homedepot.com/p/Everbilt-Face-Frame-Socket-Set-for-Everbilt-D806-and-94X-Drawer-Slides-D806SEE-W-CP/303098159

A:  Yes, they are: https://www.homedepot.com/p/Everbilt-Face-Frame-Socket-Set-for-Everbilt-D806-and-94X-Drawer-Slides-D806SEE-W-CP/303098159

A:  Thank you for your interest in our Everbilt 24" Soft-Close Full Extension Side Mount Ball Bearing Drawer Slides. For the Slide to properly operate, the weight on the Soft-Close mechanism holds less weight. Best, Customer Care Team

A:  Thank you for your question on the D94222E-ZP-W. When closed these slides should be 22". Our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team

A:  Dave, Thank you for your question on the Everbilt 20 in. Soft-Close Full Extension Side Mount Ball Bearing Drawer Slide Set 1-Pair. As the manufacturer, we cannot recommend this and will void the warranty. Best, Customer Care Team

A:  Bill, Thank you for your question on the Everbilt 14 in. Soft-Close Full Extension Side Mount Ball Bearing Drawer Slide Set 1-Pair. The slides are 1/2" wide. Best, Customer Care Team

A:  The overall thickness of the slide assembly is 1/2". I try to leave an extra 1/32" on the total drawer width if I am building the drawers from scratch. The slides seem to work smoother that way.