Questions and Answers for Gardner 4.75 gal. DriveSeal 4 Driveway Filler and Sealer

A:  Thank you for your question, Jorge. We do not recommend using this product on millings. If you have further questions, you can contact our customer service at 1-800-237-1155 to discuss the project details.

A:  Great question, Tommy. Typically, for driveways in average condition, apply 350 sq. ft. per 5-gallon pail in two thin coats. Coverage varies based on the surface condition and texture. If the asphalt is too rundown, there is a chance that this might not work for your project. Please consider reaching out to our customer service at 1-800-237-1155 to discuss the project details.

A:  Great question, John! After opening end resealed in a controlled environment, the shelf life is 1 to 3 years. You can find the TDS and helpful how-to videos on the individual product page of www.gardnercoatings.com. Or you can contact our customer service at 1-800-237-1155 to discuss the project details.

A:  Thank you for this question. The DriveSeal 4 Driveway Filler and Sealer is not latex based. For more information, please refer to the Technical Data Sheet under the product details of this listing. Or you can reach out to our customer care team at 1-800-237-1155 to discuss the project details.

A:  Thanks for your question! Gardner Driveway filler and sealer will cover approximately 350 sq/ft per 5-gal pal and varies on how rough the surface is. If you have not done so, please take a look at our TDS manual and if you have any questions or please contact our customer service team at 1-800-237-1155.

A:  Great Question. New asphalt must cure at least six months and/or one full summer season before applying sealcoat. Clean driveway first to ensure adhesion. Scrub oil spots with degreaser and a brush. Repair cracks and fill holes with appropriate Gardner Blacktop repair products. Repairs must cure according to label instructions before sealing. DRY TIME: (based on 75°F, clear sunny skies, and humidity < 35%): For foot traffic, allow 1 hour after application For vehicle traffic, allow 24 - 48 hours. Temperature, wind, sunlight, applied thickness and humidity affect dry time.

A:  Great question. We do not recommend use for off label applications. You can find the TDS and helpful how-to videos on the individual product page of www.gardnercoatings.com. Or you can contact our customer service at 1-800-237-1155 to discuss the project details. All the best with your project!

A:  Thank you for your question. New asphalt must cure at least six months and/or one full summer season before applying sealcoat. Be sure to reference the Technical Data Sheet found on the individual product page at www.gardnercoatings.com for further information. Or contact our customer service at 1-800-237-1155 to further discuss the project details and get additional product information.