Q:can I router a 3/4" wide groove across the top to install a t track?
by|Aug 20, 2023
1 Answer
Answer This Question
A: Sure you can
by|Aug 21, 2023
Q:2 things... First do I have to stain or poly this to use in my center island where I prepare everything (foods) even using as cutting board as it is?
Also, will this work as a bench on one side of dining table and hold 400pound? 4x4 leg's enough?
by|Aug 16, 2023
1 Answer
Answer This Question
A: 1/ It’s important to use a food-grade oil or stain that has been specially formulated for use on butcher blocks to ensure that the surfaces remain safe for food preparation. Another option is to seal the butcher block with a food-safe polyurethane. 2/ You can custom it as a bench on one side for dining table. This will have the wonderful design set for kitchen.
by|Sep 18, 2023
1 found this answer helpful
Q:Are the dimensions true to size or are they similar to boards, i.e. 2x4 is not really 2x4?
by|Aug 16, 2023
1 Answer
Answer This Question
A: For Hampton Bay we add 2inches length for all size (ex: 4ft will be 50 inches instead of 48 inches length). The width and depth will be exactly the information we shown.
by|Dec 11, 2023
3 found this answer helpful
Q:Are 10 feet in this countertop 120 or 122 inches?
by|Aug 14, 2023
1 Answer
Answer This Question
A: It is 122 inches
by|Aug 15, 2023
Q:Is this complete solid wood? I need 5?x39? however only finding 5? with 30?. Using for island with a 24? and 30? base. Thanks!
by|Aug 4, 2023
1 Answer
Answer This Question
A: Yes, it's solid wood. Very heavy! I purchased the 6" x 39" for an island and I am not seeing the 5" option on my computer.
by|Aug 6, 2023
Q:I?d like to use this as a bench seat in a mud room. Would this hold up to kids / adult weight if supported but a cabinet?
by|Jul 30, 2023
1 Answer
Answer This Question
A: yes, this is 1.5 inches thick and should easily hold several hundred pounds of weight
by|Aug 15, 2023
Q:My island is 63 wide by 55 long. Can two island tops be customized by mounting them side by side?
by|Jul 29, 2023
2 Answers
Answer This Question
A: Yes, but it takes some skill to get a seam that doesn't show. There are quite a few ways to do it.
by|Nov 1, 2023
A: You can mount them by Milter Bolt or Biscuit/Mortise and Tenon joint
by|Aug 21, 2023
Q:Do you think a wipe-on poly finish would work well directly on this wood? I won't be staining the wood but want an easy method of applying some protection to the wood to use as a desktop.
by|Jul 28, 2023
3 Answers
Answer This Question
A: Yes, wipe-on poly will work just fine. It's how I finished mine, also for use as a desktop.
by|Oct 21, 2023
A: You MUST use food grade products with any surface that comes/may come into contact with food.
by|Sep 16, 2023
A: This butcher block can be wiped on well. Please remember to sand the panel before applying the finish.
When you applied the finish, you must shake the can or stir it very well each time. Choosing the type of sandpaper to use is also one of the things to pay attention to.
by|Sep 16, 2023
Q:is this product flat and square enough to put/glue 2 pieces together and make a nice (semi seamless) butt joint, without the need for using a jointer or planer ?
by|Jul 23, 2023
1 Answer
Answer This Question
A: Normally, we will put 2 pieces together by joining (butt joint with milter bolts or milter joint with biscuit/ tenons and pocket bore). Or you can put them together by drill and dowel.
by|Dec 10, 2023
2 found this answer helpful
Q:I made a mistake and ended up with some real bad teapots. How can I fix this at least somewhat? It will be the underside (hidden) of the butcher block.
by|Jul 21, 2023
1 Answer
Answer This Question
A: Make a paste of baking soda and water and apply it to the stains. Gently scrub the stains with a cloth or a sponge to make sure the stains disappear.