Q:Will this remodel plate work with the Boardwalk 82830 EPSRN series shower fixture?
by|Sep 27, 2017
1 Answer
Answer This Question
A: Hello Bob and thank you for your interest in Moen products. The Moen Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome is only designed to fit any round 7" escutcheon plate. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
by|May 4, 2023
Q:how long an how wide is this remodeling cover plate
by|Feb 1, 2017
2 Answers
Answer This Question
A: Here are the dimensions for this product: 15.75"D x 10.38"H x 8"W.
by|May 4, 2023
1 found this answer helpful
A: Hello Jta123 and thank you for your interest in Moen products. The Moen 5.5 in. Dia Metal Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome is 13 ½” long, 9” wide in the center and 5” wide on both ends. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 a.m.-7:00 p.m. Monday through Friday Eastern Time.
by|May 9, 2019
1 found this answer helpful
Q:Stem is not long enough to accommodate handle, is there anything I can do? Do you make a longer cartridge? I purchased a "Darcy" 82550SRN.
by|Jan 17, 2017
2 Answers
Answer This Question
A: Hi jkr2, unfortunately for this Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome, if ordered on Homedepot.com, will be shipped as it appears on Homedepot.com. We are not able to make changes to the product. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
by|Jan 19, 2017
A: Hello Jkr2 and thank you for your interest in the Moen 5.5 in. Dia Metal Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome model 1920. You may need extension kit 96945BN. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
by|Mar 27, 2019
Q:Looked in the store, plugs are too large. Went on Moen's website-nothing? This was a retrofit with holes left unused as the valve was mounted directly to the old stem and this plate was used to cover the hole left after installation. The holes are approximately 1/8" in diameter. Do I need to go to a plumbing supply store?
by|Oct 23, 2016
2 Answers
Answer This Question
A: I thought I was going to have the same problem so I researched a bit and came up with the following website that has decorative screw covers. I had chosen chrome, but they have other colors. I hope this helps.
http://www.pro-dec.com/screw-caps-screw-covers/8-8-electroplated-snap-caps
by|Jul 17, 2017
1 found this answer helpful
A: Hello vern and thank for the feedback you posted on the Home Depot website. Moen doesn’t manufacture plugs/caps to fill in the blank holes when using the Moen 5.5 in. Dia Metal Remodeling Cover Plate for 2 and 3-Handle Tub and Showers. Our Consumer Services Contact Center can be reached at 1-800-289-6636. They are available Monday through Friday from 8:00 am – 7:00 pm Eastern Time.
by|Apr 15, 2019
Q:Can this remodeling cover plate be used with Moen Hensley style? (it is square)
by|Mar 9, 2016
4 Answers
Answer This Question
A: Hello Roxie and thank you for your interest in Moen products. The Moen Remodeling Cover Plate in Brushed Nickel is designed to work with our round escutcheon plates only. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
by|Jun 2, 2020
1 found this answer helpful
A: No, it doesn't work with square models, I took my set back with a square plate and purchased a round plate. No one has come out with a square remodeling plate yet!
by|May 3, 2023
A: no, round escutcheon only
by|Jun 2, 2020
1 found this answer helpful
A: no
by|Jun 2, 2020
1 found this answer helpful
Q:The Banbury single handle center plate is 7.165" in diameter. Is this too large for the cover plate?
by|Jan 22, 2016
2 Answers
Answer This Question
A: Hello mj and thank you for your interest in Moen products. Moen Remodeling Cover Plate in Oil Rubbed Bronze is designed for a 7” round escutcheon plate. Moen has not tested/evaluated other ways of installing/using this product; therefore, we cannot confirm/recommend this product can be used in this manner. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
by|Dec 22, 2018
A: Most likely. It says 7" and you can always try, but my experience showed it did not have a lot of excess room to play with. Worst come to worst, you will have to start over with another brand of system. Not a great choice.
by|May 4, 2023
Q:will this work with the Delta B114900 faucet?
by|Dec 11, 2015
1 Answer
Answer This Question
A: Hello Pn and thank you for your interest in Moen products. The Moen Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome was not manufactured or tested to accommodate our competitors trim kits. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday and on Saturdays from 9:00 am - 3:00 pm(EST).
by|May 3, 2023
Q:Will this work with the Moen Rothbury Single Handle Shower Faucet?
by|Dec 3, 2015
2 Answers
Answer This Question
A: Hello Primo and thank you for your interest in Moen products. The Moen Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome was designed for installation with a 7” round escutcheon plate. The Moen Rothbury tub/shower products come with an 8” round escutcheon plate. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday and on Saturdays from 9:00 am - 3:00 pm(EST).
by|May 3, 2023
A: It didn't fit mine. Rothbury too big for center of Cover Plate. We had to downsize.
by|Jul 17, 2017
Q:will this plate work with all moen single handle shower controls or only specific models - if only limited models, please advise which ones
by|Jul 31, 2015
2 Answers
Answer This Question
A: Hello Eddie. Thank you so much for your interest in Moen products. The Moen remodel cover plate fits all 1-handle tub/showers with 7” diameter escutcheons. If you have additional questions, please call Moen at 1-800-289-6636 our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday and 9:00 a.m. - 3:00 p.m. Saturday EST.
by|May 3, 2023
2 found this answer helpful
A: Not sure, but we used it with Ashville 82877 and it worked perfectly. I think it could be used for all the models.
by|Jan 3, 2023
1 found this answer helpful
Q:Is this made of plastic or metal? MOEN Model # 1920 Internet # 100665086 Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome. Plastic?
by|Mar 17, 2015
2 Answers
Answer This Question
A: Metal
by|Jun 12, 2019
A: Hello dogs and thank you for your interest in Moen products. The Moen Remodeling Cover Plate for 2 and 3-Handle Tub and Showers in Chrome, model number 1920, is a metallic part. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday and on Saturdays from 9:00 am - 3:00 pm(EST).