Questions and Answers for Makita 18V LXT Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) w/ (2) 4Ah Batteries, Bag

A:  No, it is not variable.  It’s switch is an on/off switch.

A:  No

A:  Thank you for your question on the XAG04Z angle grinder. This tool does not have a variable speed dial.

A:  yes, it does accept the spin on grinder wheel. Provided the wheel is for a standard 4 1/2 grinder. All stranded parts /attachments for a 4 1/2 grinder will work with this tool.

A:  No, the disc has no treads ,as shown in the picture

A:  Yes, and it works great! Used diamond wheels on it to cut concrete. Exceptional tool with good battery life as it is brushless.

A:  Thank you for your question XAG04Z grinder. The XAG04Z is ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit. We are not certain of your reference to spin on wheels? The tool has a 5/8" - 11 UNC threaded spindle. Please read the instruction manual before use.

A:  Yes 

A:  Yes

A:  Thank you for your question. This tool is compatible with the Bl1830,Bl1830B,Bl1815 and Bl1815N.

A:  Dear Valued Home Depot Customer, To better answer your question, please contact the HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 p.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.

A:  Thank you for your question on the XRT01Z router. This tool delivers 380 feet of cutting performance in red oak using a 1/4" (6mm) straight bit at a 5/32" (4mm) depth with a 5.0Ah battery. This tool has no Horse Power rating.

A:  it’s designed for just about everything.Their are many blade selections.It is a very handy tool.You won’t be sorry if you buy one 

A:  If you buy one of the semi-circular blades, it works well for drywall.

A:  Thank you for your question on the XMT03Z oscillating tool. This tool is considered a multitool which was engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.

A:  Yes, it cuts like butter. This is the best all around tool cutting drywall, metal, wood and anything that you choose to cut.

A:  You can definitely use it on drywall. I have used it to cut some small access points in my drywall. It would be a bit tedious to try to cut drywall for long stretches but could be used for that.  I originally purchased mine for tile grout removal using a grout blade. It worked fantastically removing the grout leaving the tiles intact for me to selectively remove. I also used it to remove the bottom 1/2” of my wooden baseboard trim. That was very effective but tedious. It’s a great tool to cut things that are difficult to cut any other way. 

A:  I bought the router. the BL1815 battery does NOT fit. Something prevents it from installing. I will get a new set of batteries and a charger. Also, the price at the Home Depot web site was $159. Paid $179 in the Frazer PA HD.

A:  Yes it will, however the run time will be very short. The BL1815 is a small 1.5 amp battery, it would be OK for edge trimming or other light work. Makita has discontinued the BL1815 battery.

A:  Thank you for your question on the XTR01 router. This tool is compatible with the following batteries. BL1830,BL1830B, BL1840B, BL1850B, BL1860B.

A:  yes if you can find one

A:  Yes it can..... but mine died not even 4days after purchased. There's a design flaw in the saw that I wish I had seen before purchasing. A very disappointing flaw at that. Right where the blade attaches there are two small screws that hold the blade receiver to the reciprocating shaft. Not something you would normally see on any of Makita's products. And as a result of such it shared through both bolts making the unit useless and now I've got to do the thing in order to get a replacement...

A:  You can use any length blade with this!

A:  Thank you for your question on the XSF03Z this is a drywall screwdriver you need to insert the screw one by one; the adjustable nose piece delivers consistent screw depth.

A:  Thank you for your question. No, Makita USA Corded Chargers are rated for US standard 120V outlets and are not recommended to be used on any other voltages.

A:  I live in the USA where 120V is the norm so the plug on my charger fits 120V outlets only. 

A:  The plug on the charger I have works in 120 V outlets only.

A:  NO

A:  It will not

A:  No. 115-120v only.