Questions and Answers for Master Flow 3 in. to 5 in. Adjustable Versa Cap

A:  Due to the design we would not recommend using this for make up air. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com .

A:  Yes, spray paint will cover it in whatever color desired.

A:  Yes with spray paint

A:  We would not recommend painting the Adjustable Versa Cap. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com or call Technical Services at 800-211-9612, Mon- Fri, 8 am 5 pm EST.

A:  Yes, this is recommended for flue, hot stack or b-vent installations. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com or call Technical Services at 800-211-9612, Mon- Fri, 8 am 5 pm EST.

A:  This is recommended for flue, hot stack or b-vent installations, can be used to terminate existing TTR penetrations, it would not be recommended for dryer venting. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com or call Technical Services at 800-211-9612, Mon- Fri, 8 am 5 pm EST.

A:  The Versa Cap does not come with a screen, the design may help prevent larger animals/birds from entering the pipe. If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612

A:  This is fro rooftop applications only, not horizontal applications. If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612.

A:  no.

A:  yes

A:  No, however this doesn't need one. This is a "versa Kap", or "versatile" cap with adjustable screws / nuts. It is a replacement cap for a Type B flue pipe. A Type B flue pipe connects to your hot water heater or a similar AC appliance that uses gas. Therefore it is a "closed" system & any flying insects don't really want to go in this anyhow.

A:  The Versa Cap does not come with a screen. If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612.

A:  There is no screen included with the vent, but it would be relatively easy to add one given the way this vent clamps over the end of the vent pipe using the expandable base clamp visible in the product photo. Bend a piece of stainless steel screen over the end of the vent pipe, the slide the cap in place and tighten the clamp. Consider adding a sheet metal screw or two through the clamp band if this is being used in a particularly windy place (like on a roof).

A:  I dont think so.

A:  It does not come with a screen.

A:  I'm not sure. Mine is on a vent outside for the heater. I believe there all the same.

A:  You will have to check with the appliance manufacturer to see if these are acceptable. If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612.

A:  This is specifically designed for use on a hot water heater. It is a replacement components for a B cap.

A:  Yes, the Master Flow 3 in. to 5 in. Adjustable Versa Cap is recommended to be used with flue, hot stack or B-vent installations , including Water Heaters venting. If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612.

A:  Yes , I bought mine few weeks ago and installed it in my vent pine for my sewer exhaust pipe , it was great effective and fixed our water leaking problems

A:  Yes, should be able to as long as you are venting to let the fumes out.

A:  This is a Type B cap, so... yes. That kind of application is specifically what they are designed for.

A:  Recommended for flue, hot stack or b-vent installations. The way this cap is made Lint may get caught in the "fins" . If you have any other inquiries about our Master Flow products please call Technical Services at 800-211-9612.

A:  Technically, yes, but I would not. Vertical dryer vents require something like a RoofJack brand vent. The vents that look like an upside down “J.”

A:  No. It's always open and wind and bugs can enter. Plus lint can get stuck in the fins.

A:  no. it is for furnace exhaust only

A:  Sure, if the dryer vent pipe diameter is between 3-5 inches. It's very easy to install.