Questions and Answers for Nexgrill 14.56 in. x 4.26 in. Stainless Steel Flame Tamer

A:  Numbers listed under info

A:  Basically the same measurements 14 1/2” Long 4 1/4”Wide 1 1/2” high

A:  works like a charm, easy to install makes the grill look new again

A:  Yes

A:  Hello Tommy - Thank you for your inquiry! The dimensions of this flame tamer are as follows: 14.57" L x 4.26" W x 1.40" H. Please verify that these measurements will work in your own grill. Should you have additional questions, please feel free to reach out to us at 800-913-8999 or wecare@nexgrill.com. Thank you again for your inquiry and Happy Grilling from all of us at The Grill Services!

A:  Hello David - Thank you for your inquiry! Part #04007677A0 is the correct replacement flame tamer for your grill model 720/730-0898. Should you have additional questions, please feel free to reach out to us at 800-913-8999 or wecare@nexgrill.com. Thank you again for your inquiry and Happy Grilling from all of us at The Grill Services!

A:  Not sure, fits a 720-0830H, I would look up your parts list on nexgrill to be sure.

A:  Hello Donald - Thank you for your inquiry! The replacement flame tamers for your grill can be ordered here: https://www.homedepot.com/p/Nexgrill-14-63-in-x-3-5-in-Porcelain-Enameled-Flame-Tamer-04007620A0/206880106 Should you have additional questions, please feel free to reach out to us at 800-913-8999 or wecare@nexgrill.com. Thank you again for your inquiry and Happy Grilling from all of us at The Grill Services!

A:  They were perfect and they fit. I would order again.

A:  I used these replace my originals of about 1 year old. They probably could have lasted another year

A:  Hello AlexK, Our vendor Nexgrill informs, "The width between the two legs is 3.26”. We appreciate your interest in Home Depot.

A:  Hello Bob, this is Roland. Thank you for your inquiry! The model number will be listed on the front cover of your owner's manual as well as on the manufacturer sticker on your grill. For free-standing grills, the model number will start with 720. Should you have additional questions, please feel free to reach out to us at 800-913-8999. Thank you again for your inquiry and Happy Grilling from all of us at The Grill Services!

A:  Check the data plate on the inside door of the compartment that holds the propane tank.

A:  Hello BigD, this is Roland. Thank you for your inquiry! Please use the following measurements to verify if these flame tamers match your current configuration: 14.56 in. L x 4.26 in. W x 1.40 in. H. Should you have additional questions, please feel free to reach out to us at wecare@nexgrill.com. Thank you again for your inquiry and Happy Grilling from all of us at The Grill Services!

A:  No

A:  After researching the flame tamer for my Nexgrill, There are two main points to look at: 1) Be sure to measure your length and width to verify it fits in the designed area needed 2) Pay special attention to where the tamer sits in the slots made into the grill as some are not made correctly and will not stay where they are placed. Its always best to replace with original equipment if available. Hope this helps

A:  5

A:  1 price is per item

A:  One

A:  Hello Tiger, this is Roland with Nexgrill Industries. Thank you for your inquiry! Our Nexgrill 14.56 in. x 4.26 in. Stainless Steel Flame Tamer model #04007677A0, is designed to enhance the life span of your grill by maintaining burner quality and helping to minimize flare ups. The package consists of 1 stainless steel flame tamer. Should you need further assistance or have additional questions, please feel free to reach out to me directly at wecare@nexgrill.com or call us at Nexgrill at 800-913-8999. Thank you again for your inquiry and Happy Grilling from all of us at Nexgrill!

A:  It is advertised as a 1 per purchase item. I purchased 4 as I have replace.

A:  I bought the flame tamer it was good but 6 months later. I had issues with the burners they were not stainless

A:  Don’t live in jersey

A:  I would guess these would fit, but measure the length and width of your existing ones

A:  Hello John, they will fit but the ones specifically for your grill is model 04007620A0. -Nexgrill