Hi Hamilton, Yes, there are holes to mount the RV. but it's not exactly designed to be mounted to a wall, but rather a flat horizontal surface.
Hi Roger, Thank you for sending your inquiry. Unfortunately, the Renogy RV Solar Panel Kit Tilt Mount Brackets are compatible with Renogy Solar Panels under 100W. Hope this helps.
Thank you for the question! The RV tilt mounts will not work with panels larger than 100w. Our two 100w panels will measure 39.7 x 26.7 x 1.4 in and 42.2 x 19.6 x 1.4. The 150w panels are too large for this mount. Thank you, M.S.
Thank you for the question! We have never tested our mounts with non Renogy panels. However it is rated for a 10w Renogy panel measuring 10.6 x 13.4 x 1.0 in so it may work. Thank you, M.S.
Hi Joe, These mounts are designed for our solar panels and on page 14 of the manual, you will see a table that shows what exact panels are compatible, you may find the manual on our website. Please contact us if you have any questions, have a wonderful day.
It can hold up to 40.8" H x 1.4" W x 20.7" L of solar panels.
You won’t cut these with a tin snips! You could drill out what you want or grind it I suppose. Some folks cut them in half or quarter’s to conform to an RV roof which seems to work. Check out will prowse on YouTube
Hello Rowtoo, We would not recommend making any custom adjustments as this would void the warranty and compromise the structure. If you have additional Questions or concerns please feel free to contact us directly at 909-287-7111 Monday-Friday 8:30 am to 5:00 pm PST
Hello Ace, The Renogy Tilt mount is designed and intended to be used with our solar panels. Please note that we have the manual for the mount on our website and the manual does have a table showing which of our panels are compatible with this mount. Please contact us if you have any other questions, have a wonderful day.
See page 13 of the full product manual.
Yes, but ensure you use a good leveling compound so as to seal any ceiling/roof penetrations or you'll have a new set of problems. (LEAKS) at every screw!
Hello, I would like to confirm that you can use the mounting brackets to mount the panels on the top of your patio or house. If you need further assistance, please feel free to call and speak to a live representative at 1-800-330-8678. We are open Monday through Friday 8:30 AM to 5:00 PM Pacific time.
Why not? just use lag-bolts or lag screws and some silicon to seal around the bolts, to attach through the roof decking
It depends on the patio structure. I suspect any solid structure would work. I mounted it on the end of my shed.