Questions and Answers for Veranda 5 in. x 5 in. x 8 ft. White Vinyl Routed Fence Line Post

A:  ASRH, Unfortunately, Home Depot would not be able to place a special order for the rails until May as the plant is building up inventory for vinyl fencing.

A:  I don't think you can

A:  FenceDesign, Our vinyl pre-routed posts are specific to the panels. We offer end, corner and line posts. By modifying would be going beyond the installation instructions and may void the warranty.

A:  Please visit your local PRO representative for options on a 4ft fence panel or call our customer service department at 844-529-5882.

A:  Yes, in most circumstances you would be able to replace just the damaged panel, but depending on the position of the panel, and stability of the post, you may have issues getting the bottom rail into the posts. We do offer rail clips to be used in circumstances where the railing needs to be trimmed to fit the area.

A:  Yes, very easily. I've done ot several times.

A:  Yup!

A:  I just replace one post and nothing else.

A:  Hello Angela, The distance between routed opening is 55-1/2 in., and the opening dimensions are 7 in. x 1-1/2 in.

A:  Hi Alan, You are right; the dimensions are 7 in. x 1.5 in. We'll try to get the product page updated so that these details are available.

A:  Ann, Unfortunately, we cannot speak to the compatibility of another manufacturer's product with ours as we have not tested the two together. We suggest that you go into your preferred Home Depot store, perhaps with some measurements of your current fence and some pictures of it, too. You should be able to determine what will work or won't with some assistance from a PRO associate. Best of luck to you.

A:  Ed, It is a bit of a challenge to find what parts work together on the various fences that Home Depot offers. For future reference, there is either a View This Collection/4 little boxes icon just above the product that you are considering to click on, or there is an orange greater than (>) sign above the product to click on, also. Sometimes there are both. Here is a link to all of the items and accessories for the Dover line: https://www.homedepot.com/collection/Lumber-Composites/Dover-Fencing-System/Family-306303122?omsid=203179274. As a back-up, here are some reference numbers in case you have issues with the link: Internet #203179279, Model # 141397, Store SKU #254576. Those are for the routed line post. There are, also, end posts and corner posts, depending on the project that you have in mind. Best of luck to you.

A:  Ed, It seems that this post is designed strictly for use with Dover fence panel model # 141569 and Overland fence panel model #240149.

A:  I have the same issue. Except that mine is re-posting several Linden Privacy Fence panels in the middle of an existing fence. After learning from Home Depot that that type of fence was discontinued and no replacement parts are available, and after finding that the closest posts for those panels are the 5"x5" x 9 ft White Vinyl Routed Fence Posts, I find myself considering to cut the slots of these posts to match the old posts. Any suggestions?

A:  FilmGuy, The slots are 1-9/16" x 7-1/8".