Questions and Answers for Veranda 5 in. x 5 in. x 8 ft. White Vinyl Routed Fence Line Post

A:  This fence post is made to be used with Dover (model # 141569) and Overland (model # 240149) fence panels. There is not a different fence post you can use for these two panels.

A:  Greg, You've got a point there, so we had to ask our experts. Here are the findings: The directions should say 24” in depth and not 36”-42”. This will allow the nominal 6 foot tall fence to be above and set properly in the slotted posts. We will make sure that this change gets made in our system. Thank you for alerting us to this error.

A:  This fence post is made to be used with model# 141569 (Dover vinyl fence panel) and model# 240149 (Overland vinyl fence panel).

A:  You don't need longer posts, you just need your concrete to be below the frost line. The post just needs to be 2 feet into the concrete.

A:  This fence post should work with a frost line that is 42 in. deep. If you need the fence post to be longer, please contact your local PRO associate to see if it is available for special order in your area.

A:  This post is made for use with internet number 203179275 and internet number 206625161.

A:  No, the posts are meant to stand alone. The only time we recommend installing reinforcement is if you are installing a gate. We recommend installing the reinforcement on the hinged side of the gate to give it extra strength.

A:  Please search internet number 205883925 to find our 5 in. x 5 in. x 8 ft. blank post.

A:  It is PVC with about a 1/8" wall so it is extremely easy to cut.

A:  Tom - to mount this post to concrete we suggest using the Veranda concrete mount. Model # 125960.